Beisi intelligent car bracket function: wireless chargingElectric type, responsive, clamp tightly enough, wireless charging is also good, two opinions: the current requirement is not so high, the USB that comes with the front row can not be moved, must use a cigarette lighter to turn; It is best to change the touch key to the upper right corner, when taking the phone, it is taken from the above, and now it is very inconvenient to touch a hand in the lower right corner.
It is usually connected to the vehicle's power system through the vehicle's cigarette lighter socket or USB interface, and the car charger has portability and flexibility, and can charge the device during the drive or when parking, which is convenient for users to maintain sufficient power when using electronic devices in the car. Although presentIn the car has developed a lot of its own charging methods, such as its own charging bracket, as well as wireless charging stations, etc., but the car charger is still a necessary tool for many old drivers.
Evaluation Millet car wireless charging bracket is as follows: Millet wireless charging bracket is more characteristic of 20W high-power fast charging. Basically get on and off the car with a mobile phone, get on and put it up, you can quickly return the blood, to the next destination, the mobile phone is basically full of blood. And it can not only firmly clamp the air conditioning outlet, but also the electric deformation clamp arm, as long as the phone is put on it can automatically lock. Global returnWhen the current of the power supply passes through the coil (the power supply coil of the wireless charger), a magnetic field will be generated, and other unenergized coils (the electric coil of the mobile phone) will be near the magnetic field, and the current will be generated to charge the mobile phone.
2, wireless charger usage: the mobile phone standard charger and data cable connected to the wireless charger, and then the mobile phone is/horizontally placed in the wireless charger base left and right center position, you can achieve wireless charging, the indicator light will have a breathing effect, 5 seconds after the extinguish, plug and play, convenient and quick.
3, put the mobile phone with wireless charging function on the wireless charging board, the position should be placed, you can chargeElectricity, note that some wireless charging panel support different mobile phone models, according to their own mobile phone model to choose wireless charging panel.
4, the principle of wireless charging treasure is to use wireless electromagnetic energy transmission technology to charge mobile devices. This technology enables the mobile device to be charged by establishing a radio magnetic field between the wireless charger and the mobile device, which transmits electrical energy from the wireless charger to the mobile device. Wireless charging bank usually consists of two parts: wireless charger and wireless charging module.
5, mobile phone wireless charger schematic diagram, figure /Real EngiThe principle and hardware requirements of this method are relatively simple, and the relevant standards are developed earlier, such as the Qi Wireless charging standard that we are familiar with is formulated by the WPC (Wireless Power Consortium, wireless charging Alliance). Therefore, this kind of charging technology has achieved scale, its production cost is low, and has passed the test of the market, and is more popular.
The main difference between front and rear installation is reflected in several aspects. First of all, the front mounted engine is arranged horizontally, and the rear mounted engine is arranged vertically. Secondly, the front installation mainly refers to the supporting products provided by the host manufacturer for the vehicle factory, such as brake pads, three filters, wipers, etc., which are mostly supported by the parts factory. After installation refers to the products produced by the host manufacturer are sold through dealers, mainly relying on channel sales.
The vehicle's power layout is an important differentiating factor for front-drive vehicles! - The engine is placed horizontally, and then drive the car! The engine is in a vertical layout. This difference leads to rear drive! - The rear floor of the vehicle will be visibleIt's raised. By observing this, it is easy to tell that the vehicle is front-drive! - And rear-drive! -- Design.
In the installation of vehicle networking hardware, the front and rear installation methods are also distinguished. The front-mounted network mainly integrates the vehicle and the network closely through TCU technology to form a deep connection; The back-end network is usually connected to peripherals through OBD interfaces to enhance the vehicle's network function.
Car wireless charging, divided into two ways: front and rear. In popular terms, the front installation means that the car has a wireless charging device before leaving the factory, which is generally located in the central storage box, armrest box, and the mobile phone is placedIt can be charged on the charging device.
Front installation: refers to the host manufacturer for the vehicle factory to do supporting, other similar brake pads, three filters, wipers, most of these are accessories factory to support. After installation: refers to the product produced by the host manufacturer through the dealer to go through the volume, mainly to channel sales. The difference between the two is that one is provided by the manufacturer, and one is later installed.
In the auto parts market, there are mainly two sales models of front and rear installation. Pre-assembly, that is, the main engine factory produces supporting products for the whole vehicle, such as brake pads, three filters, wipers, etc., which are carefully manufactured by the parts factory. The latter is the main machineThe products produced by the factory are sold through distributors, which mainly rely on the distribution of the sales network.
If the charging habit is not good, there is harm, if the charging habit is good, there is basically no harm, try not to play the mobile phone or watch videos while charging, to avoid it generating large heat will not hurt the battery. The other is to pay attention to the battery before 20% to charge, do not always let it in a low state of power.
It is not necessary to install wireless mobile phone bracketIt's charged. Select different phone holders according to different needs. If the phone has wireless charging function, you can choose a wireless charging stand, if there is no mobile phone with wireless charging function, choose an ordinary mobile phone stand. Even if a wireless charging mobile phone bracket is installed, the bracket must be connected to a charging line to the position of the cigarette lighter, otherwise the bracket does not have the function of wireless charging.
Aison automatic induction wireless car charger is my favorite car charger, charging speed is fast, and it is automatic induction, the device will automatically clamp the phone within five seconds of the power, the phone will not fall oh.
After the vehicle startsPut the phone on the wireless charging stand, and it will first jam directly and charge directly. If you need to remove the phone, your fingers touch one of the metal contacts on both sides, and the gripped stand will automatically release, and you can easily remove the phone. Plus, there's a problem with a lot of these scaffolds right now. If you turn off the car in advance, the charger won't power on. The phone can't be removed at this time. It's embarrassing.