1, first connect the wireless receiver and audio; Then turn on the microphone and check the frequency band that the microphone is currently in; Use the button on the receiver to adjust the frequency band, and the two frequency bands can be linked to the microphone.
2, the wireless microphone is connected to the audio, you need to insert the audio cable of the wireless microphone into the input interface of the audio. If you are using a 35mm two-core cable, plug one end into the 35 hybrid output interface of the wireless microphone receiving host, and the other end into the MIC input interface of the combined power amplifier. If you are using a cannon cable, plug one end into a wireless microphoneThe output interface of the receiving host is inserted into the input interface of the KTV front effect device at the other end.
3, audio and microphone connection steps: Insert the receiver line into the output hole on the receiver, and the microphone access empty the same. Put the other end into the amplifier microphone audio port, the audio port will generally have a note here need to pay attention to check. Plug the power cord into the wireless receiver. Plug the other end in. Install the microphone battery, pay attention to the positive and negative terminals, the small end to the large end.
4, the operation method of wireless microphone connection is as follows: Equipment: audio receiver, wireless microphone first step,Insert the receiver wire into the output hole on the receiver, as shown in the picture below. The second step, the other end of the power amplifier microphone audio port, the audio port will generally have a note here need to pay attention to check, as shown in the following figure. Step three: Plug the power cord into the wireless receiver.
1, when choosing stage audio, it is necessary to consider factors such as sound quality, power, adaptability, budget and reliability. Sound quality is the primary consideration when choosing stage audio. A quality sound system ensures soundThe sound is clear and vivid, bringing the audience an immersive hearing experience. In the selection of audio, you can listen to different models and brands of audio equipment, evaluate their timbre, intonation and dynamic range, so as to find the most suitable for their performance needs of the sound system. 2. To sum up, when designing stage lighting and sound, it is necessary to comprehensively consider the performance type, venue size, technical requirements, equipment selection, visual effects, atmosphere creation, budget and cost control and other factors. Only by making reasonable planning and arrangement in these aspects can we ensure that we can design a stage lighting and sound program that meets the needs and has excellent effects.
3, from the power reserve and sensitivity of professional stage audio equipment to have a strong power reserve, because many times it is used in the outdoor outdoor stage, if there is no strong power support, it can not show good sound and sound quality effects, but not enough volume shocking feeling, in addition, the sensitivity of professional stage audio equipment is high. Ensure to enhance the sound transmission gain, so that the audience can get enough loudness and shock.
JVC YesOne of them. JVC has been widely recognized by consumers for its broad product line, continuous technological innovation and high quality products. JVC is committed to providing customers with the best products and services to meet people's increasingly high audio needs.
JVC (Japan Victor Company) is a Japanese electrical appliance manufacturer founded in 1927 and has been the world's third largest manufacturer of automotive audio and video systems since 2008. Its navy blue logo with white lettering is very simple. In the car audio market, JVC has been a well-known brand, well received. The following is