2, open the tablet Bluetooth, find the magnetic interface at the top of the tablet. It can be charged by attaching the stylus groove to the top of the tablet. You can also charge the stylus via a USB-C connection, as followsThe attachment area is in the middle of the top of the MatePad Pro (the side with the volume key), and the concave surface of the pen is directly against the adsorption area, and it can be adsorbed with the help of magnetic force. Click on the pop-up prompt box to connect the Bluetooth.
2, Huawei two ghostpen charging to turn on Bluetooth. The combination of Huawei II and some Huawei tablets that support magnetic charging can achieve magnetic pairing and wireless charging. If the Huawei tablet does not support magnetic charging, it needs to be charged with the M-Pencil charger. Huawei M-Pencil2 can be magnetically attached to the top of the fuselage to synchronize wireless charging through Bluetooth pairing. fillingIt takes 30 seconds to write and draw easily for 10 minutes. It can be fully charged in 1 hour, and it can write continuously for 10 hours.
3, should be turned on Bluetooth, as long as the pen next to the Bluetooth will show m-pencil, click on the connection can be. HUAWEI M-Pencil2 supports wireless charging, but needs to be used with Huawei tablet, Huawei M-Pen 2 supports USB flash fast charging, plug and play, charging for 5 minutes, writing for 2 hours. HUAWEI M-Pencil (second generation) can be used with some Huawei tablets that support magnetic chargingNow magnetic pairing, wireless charging.
1. Method 1: Side adsorption charging as shown in the figure, the stylus can be charged after adsorption. Warm reminder: the tablet power is 20%, no matter the tablet light screen or the screen, the stylus in the adsorption area is in a charging state. HUAWEI M-Pencil can be fully charged for 1 hour and can be used continuously for 10 hours. This pairing method only applies to HUAWEI MatePad Pro and HUAWEI MatePad Pro5G.
2. Take Huawei M-Pencil second generation stylus as an example: After the stylus is attached to the host, it can be charged. At the same time, the pairing prompt box pops up. Click "Connect" to pair the stylus. Stylus attachment position: The stylus groove is almost attached to the top of the host (on the side of the volume key). The specific position may vary depending on the model. You are advised to perform the adsorption in the correct position until the host displays a prompt.
3. The stylus is charged through USB-C connection and does not support magnetic wireless charging. Charging side: USB-C insert tablet charging port, stylusThe indicator light is on, indicating that the stylus is charging.
4, the way of charging HUAWEI M-Pencil is also very simple, as long as it is sucked on the side of MatePad Pro, it can automatically carry out wireless charging. Find the magnetic interface at the top of the tablet, and attach the stylus groove to the top position of the tablet to charge. According to the test, continuous use of the pen for an hour, the power consumption is about 10%, and charging according to official data, charging 30 seconds can be used for 10 minutes, and 1 hour can be filled.
mpen2 Firmware 118 is the firmware version model. The tip of the mpencil is somewhat loose. This affects the writing experience. In contrast, the mpen2 nib is much better. But the mpen2's pressure is not as flexible as the mpencil's. In daily use, mpen2 gives me a better writing experience than mpencil. Then there's charging.
Different functions, different threads. Features are different: mpen2 firmware 116 is the normal version, while118 is a special edition. The regular version of the firmware ADAPTS to a wider range of tablet models and can be used on a variety of tablet devices. Special versions of the firmware are available for a limited number of tablet models and may only be available for specific tablet devices. Different thread: Huawei mpen firmware 116 thread belongs to the rotary advanced form. The 118 belongs to the compound thread form.
mpen2 firmware 116 is the normal version, while 118 is the special version. The regular version of the firmware ADAPTS to a wider range of tablet models and can be used on a variety of tablet devices. Special versions of the firmware are available for a limited number of tablet models and may only be available for specific tablet devices. In addition, the feel function of the two is not very different.
Difference in accuracy. Huawei MPEN2 Ordinary Edition is a multi-functional digital pen that supports AndroidiOS dual system, it has a 4mm precision nib and supports 2048 pressure level, which can effectively achieve high-precision touch writing on mobile phones and tablets, as well as traditional pen-like writing.
Mpen2118 firmware means to write EROM or EPROM (programmable read-only memory) in the program, popular understanding is "solidified software", Taiwan, Hong Kong and Macao called "firmware" generation using type-C interface charging and pairing, charging more convenient and fast.