First connect the desktop wireless charger to the power supply,Place the phone directly on the charger to charge it. If the phone does not have a built-in wireless charger to accept the chip, and does not support wireless charging, you can use a USB wireless charger to accept the chip and plug it into the USB port. Let's take the Apple X phone as an example.
Hello, please charge the phone with the screen facing up in the center position of the charger or the position suggested by the charger manufacturer.
Desktop wireless charging charger may choose a color according to your favorite. Place or insert the desktop wireless charger on the desktop and turn on the power. If the phone is received with a built-in wireless chargerThe chip can be directly placed on the desktop wireless charger to charge, if the phone is not directly support wireless charger reception function, the user needs to buy their own USB wireless charging receiving chip connected to the USB interface.
If your Huawei mobile phone supports wireless charging, place the mobile phone screen facing up in the center of the charger or the position recommended by the manufacturer after the wireless charger is powered on.
It can be used at home or in the office. Let's take a look at the correct use of desktop wireless charging. How to use a desktop charger includes the following steps: Will handThe wireless charger is connected with the charging head and the power cord; Place the mobile phone with wireless function in the middle of the wireless charger panel and lay it flat; At this time, the wireless charger generally lights up, indicating that the phone is in a normal wireless charging state.
1, types of wireless charging: there are also many types of wireless charging, such as car wireless charging, desktop wireless charging, embedded mobile phone wireless charging, etc., Bex wireless charging is small and exquisite, very convenient to carry, and can also be consideredOne of the entry-level subjects. 2, Belkin wireless charging board and Mophie, the cable is not pluggable, the base can only use the original AC charging head, the appearance of the wedge design is somewhat "traditional", but the charging surface area is relatively large, with transformer, power output: 15V/5A, wireless charging support 5W wireless charging function.
3, Nank South card magnetic wireless charging treasure POW3 is so popular, mainly because its cost performance is particularly high, followed by the use of upgraded large coil wireless charging induction panel, with a mobile phone case can also be charged.
4. SamsungThe overall design of the wireless charging treasure EB-U3300 Samsung wireless charging treasure is relatively slim, and it will not feel too much pressure when held by hand, and the 10,000mah battery capacity is enough for daily use, so it is a good choice for travel. In addition, wired and wireless two charging modes support the output of three mobile phones at the same time to charge, even if a friend's mobile phone is out of power when you go out, you can charge together without queuing.
5, the wheat bubble wireless charging treasure SPX02 Wheat bubble this multi-purpose wireless charging treasure is like a large red candle, the fuselage has round corners, and the side of the fuselage shell is a bright surface paintOn in. Find the "Battery" option in the Settings and tap to enter. Find the "Wireless reverse charging" option in the battery Settings and turn on the switch on the right. Put the back of the two phones on each other, make sure there are no obstacles between the two phones, and wait for the phone to automatically connect and start charging.
4, first of all, click the "Settings" on the desktop of the phone. Next, under the Settings menu, find and click on [Battery]. Finally, open the switch button on the right side of [wireless reverse charging]. Huawei radio charging only for some mobile phones have this function, not all mobile phones have. Huawei wireless charging operatorMethod: Use a data cable to connect the charging head and the charging base, and then plug the charging head into the power supply.
If you use vivo mobile phone, wireless charging is also known as inductive charging or non-contact inductive charging, based on the principle of electromagnetic induction, it is not necessary to transfer electricity to the device like the traditional wired charger, but the device that needs to be charged can be charged by contacting the wireless charging base.
Extension: Open wireless reverse charging method: You can enter the phone Settings -- battery --More Settings - Turn on "wireless reverse charging", which can provide the peripheral with up to 10W charging power supply for urgent charging. Note: After this function is enabled, if there is no charging for other devices for a long time, it will automatically turn off; This function cannot be enabled when the battery life of the phone is less than or equal to 15%.
Connect the standard charger and data cable of the mobile phone to the wireless charger, and then put the mobile phone directly (vertically) or horizontally in the center position of the wireless charger base, you can realize wireless charging, the indicator light will have a breathing effect, 5 seconds later, plug and play, convenient and quick. More use doubts can enter vivo official website-- My -- online customer service -- input manual, consult online customer service feedback.
First, open the phone and click to enter the Settings. 2, then, enter the setting interface, click the battery to enter 3, finally, in the battery interface, open the wireless reverse charging switch.
Hello, please charge the phone with the screen facing up in the center position of the charger or the position suggested by the charger manufacturer.
Hello, please place the phone screen facing up in the center of the charger orCharging can be done at the location recommended by the charger manufacturer.
Charge the wireless charger by directly placing the phone screen facing up in the center of the charger or in the position suggested by the manufacturer.
First, we open the Settings option and click Battery. Step two, we click on wireless reverse charging. The third step, put the device that supports wireless charging on the back of the machine, you can wireless charging. The basic principle of wireless charging: electromagnetic induction of a certain frequency of alternating current in the primary coil generates a certain current in the secondary coil through electromagnetic induction, thereby transferring energy from the transmission end to the receiving end.
First click the "Settings" option on the desktop of your phone. Then in the Settings page that opens, click on the "Battery" option. Finally, in the battery page, open the "wireless reverse charging switch". The benefits of wireless charging of mobile phones do not need to plug and unplug, convenient and fast. Just place the phone on the charger and you can start charging it without worrying about finding the cable or plug. Protect the phone interface and extend the service life.
To enable the wireless charging function of a Huawei mobile phone, perform the following steps: Locate the Settings icon on the desktop of the mobile phone and tap. Find the "Battery" option in the Settings and tap to enter. Find the "Wireless reverse charging" option in the battery Settings and turn on the switch on the right. Put the back of the two phones on each other, make sure there are no obstacles between the two phones, and wait for the phone to automatically connect and start charging.
Take the emui10 system as an example. Open your phone's Settings, tap on the Battery option, then find and tap on the Wireless Reverse Charging option. After that, you only need to place the device to be charged in the middle of the back of the phone. How to use Huawei mate30 wireless charging for emui10 system as an example. Unlock your phone's screen and open the Settings app on your desktop. In SettingsScreen, find the battery option, click open.
Connect the standard charger and data cable of the mobile phone to the wireless charger, and then put the mobile phone directly (vertically) or horizontally in the center position of the wireless charger base, you can realize wireless charging, the indicator light will have a breathing effect, 5 seconds later, plug and play, convenient and quick.
We turn on the phone and click Settings. On the phone's Settings screen, we tap the battery. Turn on the right button of wireless reverse charging. Move USB Connect the charging cable to the charging plug and charger, and then plug the plug into the socket. Just put the phone on and it charges normally.
Open the phone Settings screen. Click "Battery". Swipe to the bottom of the screen and find "Wireless Charging." Tap "Wireless Charging" to turn it on. After opening, place the device on the charging pad to start charging.
Hello, please charge the phone with the screen facing up in the center position of the charger or the position suggested by the charger manufacturer.