1, the position is wrong. Millet 11 wireless car charger does not respond, is the location of the phone is not correct, you can adjust the position of the phone on the wireless charger, or the wireless charger hardware is damaged, conditions can try to use other support wireless charging mobile phone try.
2, the principle of the car wireless charging base is magnetic field charging, the closer to the middle area, the better the magnetic field strength, if in the edge position, the magnetic field is weak, evenUnable to activate the phone's wireless charging function, resulting in intermittent, or unable to charge. So please try to put the phone in the middle position when charging, or change a larger phone case, add some decorative pieces, etc., to ensure that the phone is in the middle position, it should be OK. I hope this answer will help you.
3, first of all, please check whether there is dirty foreign bodies on the surface, touch sensing buttons are capacitive touch buttons, foreign bodies will affect the induction. Secondly, after removing the foreign body, accurately touch the touch area with your finger and stay for 1-2s to watch the situation. Finally, the sensing in the touch area is restored, and you can try to re-power it.
The reason why the car charger is not charged is: the voltage is unstable when charging, resulting in no charging. When charging, mobile phones or other smart electronic products generally open charging monitoring and detection procedures. If the program detects that the charging voltage of the vehicle is unstable, it prohibits charging. When using the seat, there will be no program for detection, it is recommended to use the usb interface of the car audio computer system to charge, whether it is a line or a seat.
Check the balance car charging blue light there are three aspects: First consider the chargerBad, if you change the charger or this is the line short circuit, the battery is fine, don't be cheated you change the battery; Maybe you drained the battery completely. This situation is likely to cause the battery to be charged for a long time. Leave the charger plugged in. Check back in a few hours. If it still does not return to normal, it is estimated that the battery is broken.
The battery is low. In this case, the scooter needs to be charged. The battery is faulty. If the scooter is charging when the blue light is on or flashing red, it may be a battery failure. At this time, it is necessary to check whether the charger, charging cable and socket are normal, if the problem still exists,You are advised to contact after-sales service or professional maintenance personnel to repair or replace the battery. The battery protection mechanism is triggered.
When charging Xiao Mi mobile power supply, all four lights are flashing, indicating that the charging failure can not be charged. Solution: First slightly discharge 0-10 minutes, and then get the temperature high place to charge. When the Mi mobile power supply is discharged, the indicator is blinking, indicating that it is normal, and when the four indicators are all blinking, the Mi mobile power supply has 75%-100% power.
But the inability to activate is the real pit of the Xiaomi battery. So, most of the batteries we encounter flashing red lights are actually batteriesFalse row dormancy results. To activate. All you need is a direct link between the total positive and total negative electrodes of the cell. Charging above 30V can reactivate the battery. Avoid this false dormancy, and develop a scooter when there is 1 grid of electricity to charge. Big pit two: virtual welding problem, this probability is relatively small. But it exists.
1, is it also fate? Xiaomi Wireless car charger is a device that can be charged wirelessly inside the car, which uses the latest Qi wireless charging technology.It supports fast charging and works with most phones, including iphones and Android phones. Xiaomi wireless car charger has the characteristics of easy to use, fast charging, safety and so on. It uses dual-mode compatibility and supports three charging modes of 5W/5W/10W, which can meet the charging needs of different mobile phones.
2, the upgraded version of ZMI wireless car charger has not only made significant improvements in design, but also surpassed its stability and robustness. The fragile plastic clip arm has been replaced with a high-strength zinc alloy material, ensuring that the phone is firmly fixed, regardless of the size of the smartphone is 1 cm wide and 1 cm thickCan be accurately adapted, and one-handed operation, the arm will automatically close, no button, more convenient use experience.
3, millet wireless car charger supports the following mobile phones: In addition to charging for millet MIX 2S, millet wireless charger can also be compatible with mobile devices that meet the Qi wireless charging standard, including iPhone X, Samsung Galay S9 and other mobile phones. Features, millet wireless charger supports two charging modes, 5W universal charge and 7 point 5W fast charge. Sales information, millet wireless charger price of 99 yuan.
4, perhaps because of the built-in wirelessThe thickness of the ZMI wireless charging vehicle bracket is slightly thicker than that of the ordinary vehicle bracket, but it seems that the car has a circuit board and wireless module inside after all, so the thickness is understandable. The biggest highlight of the ZMI wireless charger is the support for wireless charging, which supports up to 20W wireless output.