The reasons for the failure of the Mi 10 fast charge are as follows: The charging head used is not an official original. When the charging head output current is insufficient, the phone cannot enter the fast charging mode. If the quality of the charging cable used does not meet the requirements, it is recommended to replace it with a randomly adapted charging cable, and then try again. Due to system reasons, there may be some bugs that cause the phone to not automatically enter the fast charging mode. At this point, it is best to reinstall the charging connector.
Method 1: Using a non-original charging head will cause fast charging failure.You can try replacing the charging head directly. Method 2: This is due to the poor quality of the charging line, it is recommended to replace the high-quality charging line to see whether the fault of the fast charge has been improved. Method 3: There is a bug in the system that causes abnormal charging, you can restart the phone and then try to recharge it. Method 4: If the phone hardware is faulty, it needs to be repaired in time.
Millet suddenly can not quickly charge the solution, first of all to determine whether the last charge is the original charger, if not, the phone is restarted after the shutdown, and then use the original fast charger charging can be. Check the charger cable againOr whether the head is damaged, if it is damaged or broken, it can be replaced.
Replace the existing charging cable. According to the inquiry of the millet network, when the Mi 10 fast charge failure is recommended to replace the existing charging cable, because the low quality charging cable may not provide enough power, resulting in the failure of the fast charge, so replace the existing charging cable to ensure that the normal fast charge.
Mi 10 original charger can not flash charge, there may be two reasons, one is the charging line damage, the other is the charging head damage. You can use the replacement method to find the faulty part and replace it.
Method 1: Check the charger and data cable First, we need to check whether the charger and data cable are normal. If the charger and the data cable are damaged or incompatible, it will cause the fast charge function to fail. If the charger and data cable are normal, then we need to check whether the phone charging port is damaged. If the charging port is damaged, it will also lead to the failure of the fast charging function. Method 2: Checking your Phone's Settings Open your phone's Settings and find the "Battery and Performance" option.
The solution is as follows: Check the charger data cable: Charger head and data cable damage will affect the fast charging function, when the fast charging function fails to check its status immediately. Use the original charger: First use the battery of the phone until the automatic shutdown, and then plug in the original charger to charge, do not turn on and keep the shutdown charging, until the breath light turns green and 100% power before turning on.
Check if there is an update available for your phone's system, upgrading to the latest version may resolve the fast charge issue. After trying the above methods, if the problem persists, back up important data such as contacts, text messages, and photos, and then consider performing a factory reset, but please noteThis will erase all personal data. If all steps fail to solve the problem, remember to bring the purchase voucher, repair card and equipment, and go to the Xiaomi service center for professional help.
Reinsert the charger: First, reinsert the phone charger and make sure the plug is well connected. Clean the charging port: If there is dust or dirt into the charging port, it will also affect the fast charging function. You can use a brush or cotton swab to clean the charging port. Restart the phone: Sometimes restarting the phone can also solve the problem of damaged fast charge function.
First check whether the charger is normal, and then check whether the charging data cable is normal, but: There is a bug in the system that causes abnormal charging, you can restart the phone and then try to recharge it. Method 4: If the phone hardware is faulty, it needs to be repaired in time.
It is recommended that you use the original data cable and check whether the data cable works normally. If there is no problem with the charger and data cable, there may be a problem with the phone itself. It could be a software problem, it could be a hardware problem. It is recommended that you try restarting your phone or clearing the cache of your phone to see if you can solve the problem. If the problem still exists, it is recommended to contact the after-sales personnel for maintenanceFix.
Reinsert the charger: First, reinsert the phone charger and make sure the plug is well connected. Clean the charging port: If there is dust or dirt into the charging port, it will also affect the fast charging function. You can use a brush or cotton swab to clean the charging port. Restart the phone: Sometimes restarting the phone can also solve the problem of damaged fast charge function.
If you use a Huawei mobile phone and the phone cannot enter the fast charge mode, perform the following operations: Check whether your charger supports fast charge. Check the output parameters of the standard charger and determine whether the device supports charging based on the following informationMode to determine whether it has entered the fast charge/Super fast charge mode Ordinary charging: the icon is single lightning, and the maximum output parameters of the standard charger are 5V/1A and 5V/2A.
Check whether the original fast charging cable and adapter are used, and the mixed use of non-standard chargers and data cables with standard devices will also lead to slow charging. Check whether the mobile phone charging cable and the mobile phone connection port are fully inserted, and it is recommended to reinsert, if there is dust in the charging connector, it will lead to slow charging, and it is recommended to clean up.
Millet suddenly can not quickly charge the solution, first of all to determine whether the last charge is the original chargerIf not, turn off the phone and restart it, and then charge it with the original fast charger. Check again whether the charger cable or head is damaged, if there is damage or damage, replace it.
Quick. Mi 10 fast charging with wireless charging fast, Mi 10 is a mobile phone owned by Xiaomi company, is a "high-end flagship mobile phone created for the dream", but also a decade of millet.
Recently, millet vertical air cooled wireless charger hairCloth, no doubt for 30W wireless fast charge provides an excellent stage. Let's take a closer look at this product. First of all, the experience sharing of Xiaomi 10 Pro gives people a deeper understanding of Xiaomi's high-end route. Although the release of millet 10 series under the epidemic is full of challenges, Lei Jun's on-site performance and the warm response of rice fans show Xiaomi's strong market appeal.
Mi 10 is capable of wireless charging. In terms of battery life, the Mi 10 built-in 4780mah large battery, using the standard fast charger + data cable to charge, the fastest 57 minutes can be charged to 100%. Mi 10 is supported30W wired charging and 30W wireless charging, while also supporting wireless reverse charging.
Mi 10 can be wireless charging, Mi 10 supports 30w ultra-fast wireless fast charging, 10w fast wireless backcharging, but in the use of wireless charging needs to be combined with Mi 30w vertical air-cooled wireless charging, Mi's battery capacity is 4780mah large battery, support 30w wired fast charging, Wired charging officials say it can be fully charged in 57 minutes.
About 20 yuan. According to the inquiry of the official website of the millet mobile phone, the millet 10 has no way to fast charge can be changed to a fast charger, a millet fast charge is about 20 yuan.
Check whether there is a new version of the system, and then try to upgrade the system; If it doesn't work, back up important data (contacts, text messages, photos, etc.) and then try to restore factory Settings. If the problem persists, take the purchase invoice, repair card and machine to the service center for inspection. Millet 10 fast charge failure how to repair method 1: The use of non-original charging head will lead to fast charging failure, you can directly try to replace the chargeA electric switch.
Confirm charging 0-100% of the time, whether it is charged in the startup state, when the charging power reaches about 95%, in order to prevent overcharging caused damage to the battery, the phone will enter the trickle charging state.
Mi 10 supports 30w fast charge. The Mi 10 is equipped with Qualcomm Snapdragon 865 processor, 100 million pixel ai four cameras, 4780mah battery, 30w wired fast charge, and miui 11 system.
Replace the existing charging cable. According to the inquiry of the millet network, when the millet 10 fast charge failure is recommended to replace the existingCharging cable, because low quality charging cable may not provide enough power, resulting in fast charge failure, so replace the existing charging cable to ensure that the normal fast charging.
1, motherboard charging chip. Xiaomi 10 supreme version in use, has not been able to fast charge only slow charge, because the motherboard charging chip is broken. The Mi 10 Supreme Commemorative Edition is a smartphone released by Xiaomi on August 11, 2020A cell phone.
2, that must be the power of your charger is insufficient, it is supported by 120 watts fast charge. This is obviously your charging head power is not up to.
3, usually this kind of situation may be caused by the aging of the data line, you can try to replace the new data to see.