Mobile phone charger 66w means that the mobile phone supports 66w high-power super fast charge. 66 watts in a 220 volt loop where the current is0.3 amps, or 300 mah. The charger 66w means that the mobile phone supports 66w high-power super fast charge. 66W super fast charge adopts low voltage and high current charging mode, the higher the fast charge power, the faster the mobile phone charging speed, but the charger and the mobile phone fast charge protocol must be consistent, otherwise the fast charge function cannot be realized.
The parameters of the Huawei 66w charger are as follows: Output voltage: USB 5V-66W, indicating that the maximum output current of the charger is 66W. Output power: depends on the requirements of the device being charged. In general, if the device supports 66W input, then you can use this oneThe charger. Compatible protocol: Huawei Private Fast Charge protocol. This means that the charger can only charge devices that support Huawei's private fast charge protocol, such as Huawei mobile phones, tablets, and so on.
w is the power of the charger, Huawei Enjoy MAX is a mobile phone released by Huawei on October 15, 2018 at Xi 'an Jiaotong University. Huawei Super Fast Charger GaN multi-port charger (Max66W), support PD protocol device charging, small and portable; The logo of Huawei 66W Super Fast Charger is printed on the lower right corner. Input: 200-240V~50/60Hz, 8A.
Huawei fastThe power of the 40W charge is 40 watts, while the Huawei fast charge 66W is 66 watts. This means that the 66W charger can provide higher current and voltage, resulting in faster charging speeds. Due to the difference in power, the charging speed of Huawei Fast Charge 66W is significantly faster than 40W. For example, if two chargers charge the same capacity battery at the same time, the 66W charger may be able to fully charge the battery in less time.
Huawei 66w charger is Huawei's latest flagship fast charging source, which uses SuperCharge 0 technology and can support 66WAlthough the shanzhai version of the charger may be similar to the original charger in size and weight, a closer look will reveal many differences. For example, the delicacy of the mouthpiece, the printed logo and the font depth of the nameplate are the key to distinguishing the true and false.
2, the genuine and fake comparison of Huawei 66W charger can be carried out from the following aspects: appearance and workmanship: The handwriting on the bottom of the genuine charger is clear, smooth and slim, and the edge gap is small, and the workmanship is fine; Fakes, on the other hand, may have blurred handwriting, rough edges, large gaps, and rough workmanship. In addition, the pins of genuine chargers are usually smooth and uniform, while fake chargers may beRough, with marked lumps.
3. The genuine Huawei 66w fast charging outer package is printed with the words "Huawei" and product model, the font is clear, the printing quality is high, and the color is bright. The packaging of counterfeit products is often poor printing quality, fuzzy font, color is relatively dim. In addition, there are anti-counterfeiting marks on the outer packaging of genuine products, which can be verified by scanning the QR code or entering the serial number. Charger head Second, we can observe the charger head.
1, hello this is not necessarily, my phone is Huawei 66W charger, but my phone is Huawei mate 20PRO can only display 40WMAX, if you are P50 or MAAT40pro, it can be displayed.
2. Display. HarmonyOS phones that support 66W, displayed when charging with the original 66W charger. Huawei HarmonyOS, a microkern-based distributed operating system for all scenarios, was officially released at the Huawei Developers Conference in Dongguan on August 9, 2019.
3, HUAWEI Mate X, HUAWEI Mate Xs: If you use Huawei gallium nitride ultra-thin charger (Max 66W), it currently supports a maximum 20V2A super fast charge, and can not show the words Max xx W for the time being. This problem has been optimized, the specific optimization completion time or pay more attention to the follow-up official notice.
4, first of all, to confirm whether the Mate 30 phone itself supports 66 watts fast charge. Although the Mate 30 series phones usually support high power fast charge, different models may support itThe power is different. If the phone itself does not support 66 watts fast charge, then even if the use of 66 watts charger can not achieve fast charge. Example 1: Mobile phone models do not support 66 watts fast charge Assume that the user is buying the standard version of Huawei Mate 30, rather than the Pro or RS version.
5, the use of 66W power adapter to charge the device, the maximum support for 10V25A (35W) charging, up to 40W, so do not display "Super fast charge Max40W". You are advised to use the charger and data cable recommended by Huawei. Check the interface for foreign objects or dirt. Please giveBefore charging the phone, ensure that the charging port is clean and the port connection is stable. If the interface is not fully inserted or is obviously loose, you are advised to reinsert it.
Huawei mate40pro supports 50W Huawei Wireless Super Fast charge and supports wireless reverse charging. Note: Max support 50W wireless Super fast charger, you need to buy Huawei Super Fast charger vertical wireless charger (Max 50W) or Huawei Super Fast charger noneLine charge (Max 50W), and use with a specific 66W Huawei Super Fast Charging kit. The actual charging power varies according to the actual scenario.
Huawei mate40pro supports wireless charging. Huawei Mate40Pro standard charger supports 11V/6A or 10V/4A or 10V/25A or 5V/5A or 5V/5A or 9V/2A or 5V/2A output, supports 50W Huawei wireless Super fast charge, also supports wireless reverse charging and 66w wired charging fast charge. 79% charge in 30 minutes, fromIt takes 48 minutes to turn off and reach 100% full. When using the 66W Super fast charging, there is also a cool 3D super fast charging effect.
Huawei Mate40Pro supports wireless charging. The Huawei Mate40Pro phone is equipped with wireless charging technology based on the Qi standard and can be charged wirelessly using a compatible wireless charger. Users put the phone on the wireless charging base that supports the Qi standard, and they can achieve a convenient E-line charging experience. Huawei Mate40Pro also supports reverse wireless charging, which can be carried out by other devices that support the Qi standard or corresponding protocolsLimited wireless power supply.
The phone supports wireless charging. Huawei mate40pro supports wireless charging and has 50W wireless charging power. Wireless charging is a convenient way to charge, the user only needs to place the phone on the charger that supports wireless charging, and it can automatically start charging. The Huawei mate40pro also supports wireless reverse charging, which can use the back of the phone as a charger to charge other devices that support wireless charging.
Huawei Mate 40 Pro standard charger supports 11V/6A or 10V/4A or 10V/25A or 5V/5A or 5V/5A or 9V/2A or 5V/2A output, support 50W Huawei Wireless Super Fast charge, support wireless reverse charging. More sophisticated processes bring power gains and longer battery life. Benefit from improved power supply efficiency and intelligent power management.
Appearance: The appearance of the Huawei 66W Super Fast charger is basically the same as that of the 40W fast charger, which also uses the PC flame retardant material white shell and the surface isThe combination of bright surface and frosted design, in addition, small concave surface is its typical feature, and the difference in the color of the rubber core of the interface surface is the most obvious difference in the appearance of the two chargers. Different sizes: Huawei 40W fast charger 3D size is 50.07*224*436mm, the volume is about 614cm.
Ports The USB-A port on the HUAWEI 40W fast charge output terminal is in the center, with a white rubber core and a HUAWEI logo printed on the top of the port. The words HUAWEI SuperCharge and 66W are displayed next to the USB-A port of Huawei 66W Super Fast Charger and inside the portThe base color was also changed to orange, and the two sides of the four internal shrapnel were widened to allow the passage of large currents.
The genuine Huawei 66w fast charge package is printed with the words "Huawei" and product model, the font is clear, the printing quality is high, and the color is bright. The packaging of counterfeit products is often poor printing quality, fuzzy font, color is relatively dim. In addition, there are anti-counterfeiting marks on the outer packaging of genuine products, which can be verified by scanning the QR code or entering the serial number. Charger head Second, we can observe the charger head.
You can also use the"Check the charging status and rate on the Battery Settings screen. In this setting, you can see the current charging method, charging rate, and remaining charging time. When charging with a fast charger, the charging time will be much faster than using a normal charger, because the output power of the charger is higher and it can be charged faster.
Exterior design: Huawei 66W Super Fast Charger and 40W Fast Charger maintain the same appearance, both use the white shell of PC flame retardant material, and combine the bright surface and frosted design. The significant difference between the two is the small concave feature on the charger, and the color of the rubber core on the interface surfaceAgain, this becomes the most obvious feature to distinguish the appearance of the two.