Euler good cat wireless charging the more charged the less processing method: battery balance problem, a battery pack insideDifferent power battery modules, if you want to fully cooperate with different modules, you need to have a very close voltage, each battery cell voltage in the process of use, more or less there will be some fluctuations, if the deviation is too large, you need to correct the voltage by battery equalization.
No. According to the inquiry car home shows that 22 models of Ola good Cat come with wireless charging 15W slow charge, because the wireless fast charge protocol used by Xiaomi, Huawei, Apple and other mobile phones is not the same, can not be changed.
V. The wireless charging power of the good Cat Euler electric vehicle is 220V, 32A7 kWThe charging pile, with 6 meters of line. Euler good cat charging port is distributed in the front fwings on both sides of the body, the left side is the slow charging port, the right side is the fast charging interface, the Euler good cat fast charging power of 20% to 80% takes 0.5 hours, and the slow charging time takes 8 hours from 0 to 100km per hour.
1. The power supply is faulty. If the battery of the charger is too low or the machine fails, you can connect the charger to the power supply and charge it again. Poor contact. Charging deviceIf the charging base is not in contact with the charging base or the interface is dirty, use a soft cloth to clean the metal contact points on the charger and charging device. The power supply does not match. If the charger and the power supply do not match, it will lead to insufficient power and cannot be charged normally.
2, internal fault: there is a fault in the internal circuit of the charger, such as thermistor damage or circuit board short circuit, etc., turn off the charger, stop using for a period of time, and let the charger cool naturally. Excessive current: The voltage or current used by the charger exceeds its rated range, causing the charger to overheat. Check the operating instructions of the charger to confirm the voltage and current used by the chargerNo Within the rated range.
3. The interface is damaged. Bex wireless charging magnetic data cable interface damage is poor contact between the magnetic charging head and the charging cable, or the interface has been damaged, need to update a new magnetic charger. The charging cable adopts a magnetic connection mode, which can be easily and quickly connected and disconnected.
4. The battery mainboard of the Huawei wireless headset is damaged. The Bex charger is the same as the Huawei wireless headset port, the Huawei wireless headset battery motherboard will be damaged when it can not be charged. Beisi is a collection of research and development, design, production and sales of Shenzhen Shishang Chuang Exhibition Technology Co., LTDAs an integrated consumer electronics brand.
5. Yes. Bsi mini3 is a magnetic wireless charger, with a professional self-protection mechanism, after the mobile phone is fully charged will automatically stop the point, in order to protect the mobile phone and charger, Baseus (BSI) is a set of Shenzhen business creation exhibition Technology Co., Ltd. under the research and development, design, production and sales of consumer electronics brand.
6, foreign body interference. Bex wireless charger uses micro high performance, when the use of the indicator flashes, usually because the distance between the charger and the device is too far or there is foreign interference. BaseusThe reason why this brand of mobile phone cannot be charged wirelessly is the A13 chip. This is because it uses Apple's self-developed A13 chip, which has low wireless charging efficiency and cannot meet Apple's requirements for wireless charging performance. In addition, the battery design of the Apple 15 also limits the use of wireless charging. Although Apple has added wireless charging in subsequent products, the Apple 15 still uses the traditional wired charging method.
The ios system update has an unexpected error, and the iphone protection case is too thick. According to the query of the digital home official website, the ios system update appearsUnpredictable errors: Problems with the wireless charging function can be solved by restarting. iphone case is too thick: it can not be wireless charging, try to remove the case, and then put back on the wireless charging board to charge.
Second, you need to make sure the iPhone 15 is placed in the right place on the charger. In general, there should be no obstacles between the phone and the charger, and the back of the phone (especially where the wireless charging coil is located) needs to fit tightly to the charger. When placing the phone, refer to the instructions of the charger to ensure proper alignment. To sum up, makeUsing the iPhone 15's wireless charging feature is simple.
Take iPhone13 as an example, Apple mobile phone wireless charging may be caused by network problems, try to restore all Settings to try. Divided into 3 steps, the steps are as follows: 1 Enter the Settings General! --1 Step 1 Go to the Settings General tape Step 1, Step 2 style -- Open the phone Settings icon and click General Options.
Please check your phoneWhether the back center is placed in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
Battery problem If you use the battery manager charging, please insert the battery into the aircraft first charge, then please use the battery manager charging can be restored; If you are using aircraft charging, please pay attentionIs the head light flashing green after plugging in the charging cable, and then the red breath light flashing? If so, please upgrade through the APP.
The process by which the battery receives electrical energy from the external circuit and converts it into the chemical energy of the battery. After the battery energy is consumed by discharge, it can be restored by charging, and it can be re-discharged to form a charge discharge cycle. Generally charged with DC current (also useful asymmetric AC current or pulse current). In different cases, different charging methods are used, such as constant current charging, constant voltage charging, floating charging, trickle charging, rapid charging or a combination of these methodsLet's wait.