There is a problem with the charger or charging cable, there is a problem with the phone battery. Faulty charger or charging cable: Make sure you are using an Apple certified charger and charging cable and check for damage or wear. Mobile phone battery problems: Mobile phone battery has been aging or damaged, will also cause wireless charging can not work properly, the battery needs to be replaced.
May be mobile phone protectionThe shell is too thick, it is recommended to choose a thin mobile phone protective shell or not use when using wireless charging. The phone case is too thick will affect the induction of the charging coil and the wireless charger in the phone, resulting in normal charging. Therefore, it is recommended to remove the protective case of the mobile phone before using the wireless charger to charge; The charging coil area in the mobile phone is small, and if the mobile phone is placed incorrectly when wireless charging is used, it will also lead to normal charging.
The iPhone may heat up a little while charging. To extend battery life, if the battery overheats, the software may limit charging when it reaches 80%. When the temperature dropsThe iPhone will charge again. Try moving your iPhone and charger to a cooler location. If you use your phone while wireless charging, it is recommended to stop using your phone temporarily due to the possibility of position shifting, which may cause suspension of charging or the phone becoming hotter.
Wireless charging accessories damaged, foreign body blocking, etc. Wireless charging accessories damaged: The use of an external wireless charger or accessories, damage or failure. Check that the charger and related devices are working properly to ensure that they are compatible with the Apple 13. Foreign object blocking: Any placement within the wireless charging area applicable to the Apple 13When there are inclusions between the wireless charging board, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
2, the location of the wrong, not enough time and other factors will produce this situation, their use of wireless charging when paying attention to the Angle of placement. I used to do this, and then I was too lazy to use micro goose wireless charging, charging area is large, so don't worry about the location of the problem, the speed can also beSo, the key is that it can also be installed under the table and under the bedside table, convenient is very convenient.
3, Euler good cat wireless charging less and less processing method: Battery balance problem, a battery pack has different power battery modules, different modules if you want to fully cooperate properly, you need to have a very close voltage, each battery cell voltage in the process of use, more or less there will be some fluctuations, if the deviation is too large, you need to correct the voltage through battery balance.
4, please check whether the back center of the phone is placed in the center of the wireless charging board. Cell phone and wirelessWhen there are inclusions between the charging plates, it may not be able to charge properly. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally.
1, it is possible that the charging control circuit on the mobile phone motherboard is faulty.
2, the distance between the charger and the phone is too far. Xiaomi wireless charger needs to fit with the phone to charge normally, if the distance is too far, the light will always flash. The charger port is loose. The interface of the wireless charger must be correctly inserted into the power socket, and if the interface is loose, the light will always flash. There is a problem with the charger.
3, can be out of power, the protection state is blinking. When the millet wireless charger, millet wireless charger (universal fast charging version) LED light status is green flashing, millet wireless charger is in the error and protection stage. At this time, pay attention to whether there are metal objects placedOn the wireless charger, please take it off and charge it again. The power will be off for a while, this is not placed in the right position, detected metal foreign objects, automatic protection Settings.
4, the charger itself has problems: the power cord of the charger is loose, the charging seat is damaged, the charging light is not up, etc., which will cause the charger to not work normally. Should check the charger itself has no problem, the problem is more serious, need to contact the after-sales service for repair or replacement.
2, if the iPhone wireless charging suddenly does not charge, it may be because sometimes unpredictable errors occur in the update of the iOS system, which will cause problems with the wireless charging function, usually as long as the restart can be solved. Remove the iPhone case Sometimes the iPhone case is too thick will also lead to wireless chargingAt this time, you can try to remove the iPhone protective case and then put it back on the wireless charging board to charge.
3, it is estimated that the charger output power is insufficient automatic protection stop output. Although the original charger of the mobile phone is 5V1A, the actual input can be more than 1A, and the 5V2A charger can be used. If the wireless charger output power is only 5W, it is not enough. Only the money spent on the wireless charger, and no input and output parameters, is not matched. The power of the Bluetooth headset is too small to explain the problem for comparison, but it can explain that the wireless charger is available.
4, charge the phone to see if it can be positiveOften full (that is 100%) If the use of the mobile phone charger to charge the mobile phone can be normally full, it indicates that there is a fault inside the wireless charger, if the use of the mobile phone charger can not be often full, this problem, in the case of the charger, charging data line, mobile phone tail plug are normal, the problem may be, The charging control circuit on the main board of the mobile phone is faulty.
5, the reasons for this situation are as follows: First of all, the magnetic phone shell will interfere with the wireless charging coil of the phone, affecting the charging effect. The phone's wireless charging coil needs to be precisely aligned with the coil of the chargerIn order to achieve charging, the magnetic phone case will change the shape and weight of the phone, making the wireless charging coil and the charger's coil can not be accurately aligned, resulting in poor charging effect.
6, it may be that the charging interface of your phone is in poor contact, resulting in the best is to replace a new one outside.