Huawei's new work revealed: beyond Apple's smart charging board, only 799 yuan starting at Huawei's July new product launch conference, although Huawei P50 series andProducts like the MatePad Pro 16 stole the show, but one mysterious new product did not go unnoticed. This product is Huawei multi-device intelligent wireless charging board, it has been officially listed, the price is only 799 yuan.
Huawei Super Fast charge wireless charger (MAX 27W) : Align the coil center of the earphone case (the lower part of the earphone is near the back position of the LED light, not the geometric center) with the center of the wireless charger coil, and the indicator light is charged.
Huawei multi-protocol Super fast charge mobile power/charging bank features: rated capacity 5600mAh, input and outputHold fast charge, output up to 25W (with the original data cable, and the charged device itself supports 10V/25A), support small current mode, can be Huawei wristwatch, Bluetooth headset and other electronic devices for small current charging, 13 safety protection, about 220g.
Charging base: Make sure that the wireless charger or charging base used is compatible with your Huawei phone and supports the Qi wireless charging standard. Under normal circumstances, you can find the applicable wireless charging equipment on Huawei's official website or relevant third-party sales channels. Charging efficiency: Although the development of wireless charging technology has been higherHowever, compared with wired charging, there may still be a certain energy loss.
Conclusion: This 3-in-1 wireless charging board is undoubtedly the ideal choice for the desktop, and it integrates the charging function with the convenience of life perfectly with its excellent practicality and aesthetics. The smart design of this wireless charging board not only has the dual charging ability of mobile phones and watches, but also looks elegant, like a delicate decoration that easily integrates into the layout of the desk.
1. Huawei mobile phoneTo charge an iPhone, perform the following steps: Open Huawei Phone Settings, locate battery options on the system Settings page, and select Enable Wireless reverse charging. Open the iPhone and place the back of the phone in the wireless charging area of the Huawei phone for charging. Expanding your knowledge: The iPhone is a line of mobile phones powered by Apple Inc. 's iOS operating system that went on sale on Jan. 9, 2007.
2. Operation of mobile phone: Huawei p30pro mobile phone system version: EMUI10 system The steps for two mobile phones to charge each other are as follows: Click to open the mobile phone tableThe Settings on the surface. Under the Settings menu, find and click to go to Battery. Turn on the switch button to the right of wireless reverse charging. Just place the two phones back to back.
3, open the wireless reverse charging Settings: the phone enters the setting battery, open the wireless reverse charging switch. Tips: (1) Do not enable the wireless reverse charging function on the charged device. If the reverse charging function is enabled on two mobile phones at the same time, one mobile phone will randomly switch to the receiving end, which may cause abnormal charging. (2) After the wireless reverse charging function of the mobile phone is turned on, please do not place the mobile phone directly on the metal material.
Wireless charging now.
matepad 8 is equipped with a 7500mAh battery, and the body supports 25W fast charge, which can be charged to about 50% in 40 minutes. At the same time, it also supports wireless charging function, which brings users a more convenient way to charge. The matepad 8 has four speakers and supports Harmon Kardon technology for a more realistic sound performance.
And it is the world's first tablet to support wireless positive and negative charging, support Qi wireless charging protocol, can support Qi wireless chargingProtocol for mobile phones, headphones and other devices for reverse wireless charging. The forward wireless charging power is 15W and the reverse wireless charging power is 5W.
The MatePadPro16 inch also uses the HarmanKardon four-speaker sound system, which supports a variety of sound formats, and the sound quality is excellent. In addition, the MatePadPro16 inch also has excellent battery life, fast charging and wireless charging, and also supports Huawei's multi-screen collaboration and intelligent screen projection.
The correct way to use the wireless charger: Connect the charger to the power supply. Please use the charging head, charging cable and wireless charging base purchased by yourself. Place the charger on a horizontal surface or other location suggested by the manufacturer. Place the phone on the charger with the screen facing up. For best performance, place the phone in the center of the charger or in the location recommended by the manufacturer.
Principle of wireless charging technology: Wireless charging technology uses current magnetic effect and electromagnetic inductionShould these two physical phenomena. Current magnetic effect means that an energized coil will produce a magnetic field, while electromagnetic induction means that an unenergized coil will generate an induced current in a changing magnetic field.
The basic principle of wireless charging: electromagnetic induction primary coil of a certain frequency of alternating current, through electromagnetic induction in the secondary coil to produce a certain current, so as to transfer energy from the transmission end to the receiving end. At present, the most common charging solution uses electromagnetic induction.
Open the wireless reverse charging Settings: the phone enters the battery setting, turn on the wireless reverse charging switch. Tip: (1) Device being chargedDo not enable the wireless reverse charging function. If reverse charging is enabled on two mobile phones at the same time, one mobile phone will switch to the receiving end at random, which may cause abnormal charging. (2) After the wireless reverse charging function of the mobile phone is turned on, please do not place the mobile phone directly on the metal material.
What is Huawei P60 Wireless Charging? Huawei P60 Wireless Charging is a new charging method that allows you to charge your Huawei P60 phone without plugging in a cable. This charging method uses a technology called "electromagnetic induction", when you are using the Huawei P60 wireless charger, you only need to place the phoneOn the charger, the electromagnetic induction technology will let the phone automatically start charging.
1. To reverse charge other mobile phones, perform the following steps: Open the Settings screen of Huawei mobile phone, find the "Battery" option, and tap. On the battery Settings page, find the "Wireless reverse charging" or "Charging Settings" option and turn on the switch on the right. Place two Huawei mobile phones together and ensure that the distance between them is no more than 10cmA case for a Huawei mobile phone.
2. Click to open [Settings] on the desktop of the phone; Under the Settings menu, find and click on [Battery]; Open the switch button on the right side of [wireless reverse charging] and put the two mobile phones back to back together. Note: The prerequisite for two phones to charge each other is that at least one phone can support reverse wireless charging. Huawei Technologies Co., Ltd. is headquartered in Bantian, Longgang District, Shenzhen, Guangdong Province, China.
3, open the wireless reverse charging Settings: the phone enters the setting battery, open the wireless reverse charging switch. Tip: (1) Be chargedDo not enable the wireless reverse charging function for two mobile phones. If reverse charging is enabled for two mobile phones at the same time, one mobile phone will switch to the receiving end at random, which may cause charging exceptions. (2) After the wireless reverse charging function of the mobile phone is turned on, please do not place the mobile phone directly on the metal material.
4. After the wireless charger is powered, place the phone screen facing up in the center of the charger or the position suggested by the manufacturer to charge.
5, Huawei p30pro supports reverse wireless charging, use the mobile phone to open the "Settings". Next, scroll down the Settings page to find and enterBattery option. You can see the switch for "Wireless reverse charging" at the bottom of the "Battery" page. Turn on the "wireless reverse charging" switch, you can charge other mobile phones that support wireless charging.
6. Click on [Settings] on the desktop of the phone, find and click on [battery] under the Settings menu, and turn on the switch button on the right of [Wireless reverse charging]. Just place the two phones back to back. Tip: The prerequisite for two mobile phones to charge each other is that at least one mobile phone can support reverse wireless charging. Note: This article takes Huawei p30pro mobile phone as an example and is applicable toEMUI 10 system.