1, first of all, please check whether there is dirty foreign matter on the surface, touch sensing button is capacitive touch button, there is foreign matter will affect the induction. After removing the foreign body, touch it accurately with your fingersTouch the area and stay for 1-2s to watch the situation. Finally, the sensing in the touch area is restored, and you can try to re-power it.
2, in this case is likely to be the product of the problem. Get it fixed. There's no manual mode for his wireless charging. Really, sometimes the better it gets, the worse it gets. Might as well have a plastic clip. It's charged directly with wire. I didn't buy the Xiaomi one, my colleague bought it and used it for about 78 months. And then it's the same problem as you.
3, the problem is mainly in the wireless reverse charging function. Supposedly, if you turn it on, the phone flips over,Use the backplane as a "wireless charging board", put the TWS headphones, smart watches and other devices supporting wireless charging on it (roughly aligned with the center of the coil), you can enjoy the "reverse blood" from the flagship machine.
4, the position is wrong. Millet 11 wireless car charger does not respond, is the location of the phone is not correct, you can adjust the position of the phone on the wireless charger, or the wireless charger hardware is damaged, conditions can try to use other support wireless charging mobile phone try.
5, millet 20w wireless car charging is still very good on the whole. This car has a charge of 20w High power output, fast charging, you can let the rider feel the experience of rapid charging. The hidden infrared sensor is set inside the car charger, which can automatically lock the mobile phone, which is not easy to fall off, and supports multi-angle free stepless adjustment, and you can adjust the phone placement Angle according to your own preferences.
6, W wireless charging, great power, heat dissipation is a problem, the millet wireless car charger Pro seriously handled, first designed an outlet in the bottom side, when the mobile phone wireless charging, will blow out cold air to cool down. The back of the bracket is also equipped with a large area of heat dissipation hole, the temperature of the bracket is not high when the actual charging is not hotShould
Wrong position. Millet 11 wireless car charger does not respond, is the location of the phone is not correct, you can adjust the position of the phone on the wireless charger, or the wireless charger hardware is damaged, conditions can try to use other support wireless charging mobile phone try.
The reason why the car charger is not charged is: the voltage is unstable when charging, resulting in no charging. When charging, mobile phones or other smart electronic products generally open charging monitoring and detection procedures. If the program detects that the charging voltage of the vehicle is unstable, it prohibits charging. When the seat is used, there is no program to detect itIt is recommended to use the usb interface of the car audio computer system to charge, whether it is a line or a seat.
The principle of the car wireless charging base is magnetic field charging, the closer to the middle area, the better the magnetic field strength, if in the edge position, the magnetic field is weak, and even can not activate the mobile phone wireless charging function, resulting in intermittent, or can not charge. So please try to put the phone in the middle position when charging, or change a larger phone case, add some decorative pieces, etc., to ensure that the phone is in the middle position, it should be OK. I hope this answer will help you.
First check the surface for dirtForeign matter, touch sensing keys are capacitive touch keys, the presence of foreign matter will affect the induction. Secondly, after removing the foreign body, accurately touch the touch area with your finger and stay for 1-2s to watch the situation. Finally, the sensing in the touch area is restored, and you can try to re-power it.
In this case, there is probably a problem with the product. Get it fixed. There's no manual mode for his wireless charging. Really, sometimes the better it gets, the worse it gets. Might as well have a plastic clip. It's charged directly with wire. I didn't buy the Xiaomi one, my colleague bought it and used it for about 78 months. And then it's the same problem as you.
Because the car mount is broken. Wireless chargers are not compatible with mobile phone wireless charging. The car mobile phone bracket can be basically divided into two types: suction cup type and snap type, and Xiaomi car phone bracket belongs to the latter.
If the green light flashes, you can try the following steps: Make sure the device is tightly connected to the charger, gently adjust the position, and you may see a change. Try using a wired charger to charge your device and see if you still have the same problem, ruling out the problem with the wireless charger. If the above methods do not work, you may need to consider replacing the charger or ask Xiaomi customer service for help.
Millet wireless charger green flashing solution is as follows: power off and wait for a while, this is not put in the right position, checkMetal foreign body detected, automatic protection Settings. Make sure you use the official charging head. Second, look carefully at the wireless charging instructions, encounter a metal foreign body near, it will automatically cut off wireless charging, and continue to flash the green light, and return to normal after power off.
1, the reason why the car charger is not charged is: the voltage is unstable when charging, resulting in no charging. When charging, mobile phones or other smart electronic products generally open charging monitoring and detection procedures. If the program detects that the on-board charging voltage is unstableDo not flush electricity. When using the seat, there will be no program for detection, it is recommended to use the usb interface of the car audio computer system to charge, whether it is a line or a seat.
2, the position is wrong. Millet 11 wireless car charger does not respond, is the location of the phone is not correct, you can adjust the position of the phone on the wireless charger, or the wireless charger hardware is damaged, conditions can try to use other support wireless charging mobile phone try.
3, not suitable for mobile phone power charger, will damage the mobile phone battery. Among them, wireless charging technology is derived from radio energy transmission technology, and there is no small powerLine charging is often used electromagnetic induction, high-power wireless charging is often used resonance. The power supply device transmits energy to the electrical device, which uses the received energy to charge the battery and at the same time for its own operation.
4, millet 6 does not support wireless charging, so millet wireless car charging, your millet 6 is not available. You can contact customer service, seven days no reason to return. Because it was your mistake that caused the return, you need to pay for the return postage yourself.