1, two hours. Ordinary Rod smallThe bee loudspeaker is generally used 5V/600-800mAh charger, the battery capacity is 8000 MA, the average charge takes two hours, one time can be used for one to two days, the charging time is short and the use of long time is loved by people.
2, when the blue light is fully charged. Rohde wireless microphone charging takes four hours to be fully full, which is directly related to the battery capacity of the wireless microphone, wireless microphone is the use of wireless signals to connect the self-installed fixed battery as a battery power supply, so its battery capacity can support it for a long timeUse. It takes four hours to recharge once you plug in the charger.
3, battery life, the receiver and transmitter are built-in rechargeable batteries, through the USB-C interface input power, full power can be used for 7 hours.
4, RODE Rode microphone WirelessgoII II. The RODE microphone WirelessgoII II is a wireless bee receiver that can be used while charging, and the radio effect is very good. The small bee receiver has two types, wireless and wired, the receiver is portable, mobile, small size, and loud, easy to use.
5, the difference between outdoor portable speakers and small bees in the use of microphones is: outdoor portable speakers with wireless microphones, the sound is relatively large, easy to hear clearly. Little bee speakers on the waist, the microphone on the ear, hands free. And the bees take longer to recharge.
6. MOMA's lark 150 Bee wireless lapel microphone ranks second in sales on JD.com. The microphone comes with a charging case, which has both storage and charging functions, and has up to 17 hours of battery life. The charging case can also power the full set of devices 5 times, easy to charge at any time. Relacart's Mi2 one tow two wireless lapel microphone ranks third in sales on JD.com.
To charge, connect the power adapter equipped with the machine to the charging jack, turn on the mains power to charge, when the battery is in the charging state, the charging indicator light is red and green; The charge light is green when fully charged. If there is no power adapter, you can also use the phone USB charger to connect to the computer USB port for charging, but because of the USB connectionThe power supply efficiency of the port is low, generally using this word will be a lot slower, it is recommended to use the power adapter is better.
The headset microphone needs to be correctly worn on the head, and the pickup Angle of the microphone should be adjusted to prevent the direction from causing whistling. When wearing, the volume should be appropriately adjusted according to the actual use of space to obtain the ideal use effect. Do not input external sound source signals (such as DVD, MP3, etc.) from the MIC jack to avoid excessive sound amplitude and distortion.
The microphone core should be directed towards the mouth and 2-3 cm away. Please charge it after using it, so that you can use it next timeThe use of bee loudspeakers is only these steps, easy to learn, even if you do not know any technology, you can quickly learn to use. The sound of the little bee loudspeaker is no smaller than the sound of ordinary loudspeakers, and it is easy to carry, so it is more popular.
First turn off the little bee speaker and unplug the microphone. Then find the USB charging cable and plug it into the disk. Finally, plug the other end into the speaker and turn on the power to charge.
Amplification function. Insert the microphone into the microphone jack for real-time amplification. The audio input jack can be connected to the computer audio cable to transmit soundOff. Ordinary small bee loudspeaker is generally used 5V/ 600,800 mAh charger, charging time according to the power of the charger and small bee loudspeaker is different, generally each charging time is about 4-6 hours can be full.
Yes. Small bee has automatic blocking function, automatic power off after full charge, will not affect the product performance because of long charging time. So the bees can charge for 24 hours. Small bee loudspeaker, delicate and practical, good portability, as well as large power, can improve the efficiency of teachers.
No. Fully charged will automatically power off, so plug in 20 hours will not explode, are too long will affect the service life, it is recommended to unplug in time. Ordinary small bee loudspeaker is generally used 5V/ 600,800 mAh charger, charging time according to the power of the charger and small bee loudspeaker is different, generally each charging time is about 4-6 hours can be full.
Yes. Small bee has automatic blocking function, automatic power off after full charge, will not affect the product performance because of long charging time. So honeyBees can charge for 24 hours. Small bee loudspeaker, delicate and practical, good portability, as well as large power, can improve the efficiency of teachers.
Charging is not the longer the better, the battery without protection circuit should stop charging after full, otherwise it will affect the performance due to heat or overheating.
No. The Wenquxing honeybee charged for a night will have a blocking system to power off, so it will not explode. Wenquxing Bee is a very useful amplifier.
There is a rechargeable battery inside the small bee loudspeaker, usually only need to use the charger to charge the battery. But the battery also has a service life, under normal use, a charge can be used for about a week, if well maintained, the battery's service life is about three years.
1, the wireless speaker with a belt buckle on the waist or other position, and then speak into the microphone can be. The small bee wireless speaker also has a LINE IN port that can be used to connect the audio signal output recording of external devices such as electric guitars, keyboards, and synthesizers. wirelessThe speaker can also be connected to a DSLR camera or a professional camera, a DSLR camera to use 5MM microphone cable, professional cameras to use cannon audio cable better.
2, the amplification function is one of the functions commonly used by small bees, only need to insert the microphone, turn on the power, adjust the sound size to achieve amplification. Honeybee can also insert U disk, play audio files, there is a hole next to the switch can insert U disk, open the switch, play audio files, you can also pause (there is a pause key), you can long press forward or back key, fast forward or back.
3, the use of the product is as followsPlay/Pause key: Short press (hold down for less than 1 second, the same below) Play/pause key in the playing state, long press (hold down for more than 2 seconds, the same below) Select Select the loop play mode. Press the radio to retrieve the existing station. Forward selection key: Short press the previous song in the playing state, long press to reduce the volume, short press forward to fine-tune the frequency in the radio state, long press forward to search the station.
4, the use of small bee loudspeaker is as follows: The music playback function needs to insert TF music storage card, find the storage card slot of the loudspeaker, and the place where the picture is circled. Insert the TF card. Turn on the power"Then play music. Amplification function: Insert the microphone into the microphone jack to achieve real-time amplification function. The audio input jack is connected to a computer audio cable to output audio as a speaker.
First plug the USB charger into the power outlet. Then connect the charging cable to the USB charger and the port of the small bee headset. Finally, when the small bee headset shows a red light, it means that it is being charged, and the charging time is about 1-2 hours. When the headset shows a blue light, the watchThe charging is complete.
The specific steps to use the Coring Bee wireless earphone are as follows: After the Coring Bee is turned on, the earphone will have a voice prompt and automatically search for devices that can be paired. At this time, turn on the Bluetooth device of the phone. Detect nearby Bluetooth. Search for nearby Bluetooth, after finding the Bluetooth headset (usually the model of the Bluetooth headset will be displayed), click to connect. After confirmation, the connection is successful. Headphones are ready to use.
The method of connecting the mobile phone to the honeybee is simple: the honeybee loudspeaker turns on, the earphone has a voice prompt, and automatically searches for devices that can be paired. At this time, turn on the Bluetooth of the mobile phone and checkTest the nearby Bluetooth signal, search for the model of the small bee speaker, click to connect, enter the PIN code (the default is 0000). When the phone interface prompts that the connection is successful, the phone and the small bee loudspeaker are connected, and you can turn on the phone to play music.
SONY Ericsson s 518 little bee speaker how to use instructions: After the earphone is turned on, the earphone will have a voice prompt, and automatically search for the device that can be paired, and then the Bluetooth device should be turned on. The mobile phone can be tested, that is, you can test the nearby Bluetooth signal, and then search the nearby Bluetooth signal, and then search the nearby BluetoothSignal, search for the Bluetooth headset signal (generally will show the Bluetooth headset model), and then link.
If your speaker has Bluetooth, then you can try to find the Bluetooth switch, choose to turn it off. Honeybee speaker Bluetooth mode switch method specific just turn on the Bluetooth to search the name of the speaker can be turned over a certain Angle in the card play mode and then it will switch.
No. The bee headset is a loudspeaker headset. The headset is not universal and can not be used on computers, although the plug of the small bee headset and the computer headset are 3.5mmBut the same jack does not mean that it is universal, which involves the plug style and structure.