1, Qi wirelessCharging is a wireless power transmission technology. Qi wireless charging technology is a wireless power transmission technology based on the principle of electromagnetic induction. It allows electronic devices such as smartphones, tablets and wearables to be charged without the use of a physical cable. This technology transmits power through a charging base or charging pad, and simply places the device on the charging base to start charging.
2. For low-power wearables, the small, thin, low-power receiver coil can be easily embedded in the back of the sealed housing or wristband area. Qi-compatible devices are a mature solution that reduces development timeSuch products can be supported by the existing WPC infrastructure. Qi-compatible wireless power systems: A typical wireless power system has a receiver (Rx) inside the portable device, which provides energy to charge the battery.
3, device to device charging If the device power is low, it will automatically transfer power from note10. Simply activate wireless shared charging in the notification panel, then place another device back-to-back in the center of the note10. When enough power is transferred, separate the device or wait for another device to charge. Supports WPCQi certified smartphone products and can be worn by SamsungWear equipment. Mobile phones: Smartphones of Samsung or other brands that support wireless charging (WPCQi certified devices).
4. The Apple Watch uses a MagSafe-style wireless charger. It magnetically attaches to the back of the Apple Watch and is then charged inductive. It's easy to use, no precise alignment is required, you just hold the joint close to the back of the watch, and the magnet in it will automatically snap the joint into place.
5, open the Settings, click the battery, turn on wireless reverse charging, will support wireless charging devices (mobile phones, wearable devices, etc.)Hold, no additional features included.
2, there are five mainstream types of mobile power: Type 1, mobile power with lighting function, built-in energy-saving super LED lighting, very power-saving. If it is simply used for LED lighting, it can be used for 3 hours to 30 hours or more according to the built-in battery capacity, depending on the battery capacity of the mobile power supply. Type two, only with the charging function of the mobile power supply, this charger does not have any other expansion functions.
3, mobile power supply type Scud Scud mobile power supply, is produced by Scud Battery Co., LTD., a setPortable charge and discharge device with integrated power supply and charging functions. Scud battery company, a leading company in the battery industry, took the lead in entering the mobile power market in 2005, and after years of research and development and production, Scud mobile power has gradually become known to people.
4, in addition to the innovative AIR-DDVT dual Air duct eddy current heat dissipation, internal safety structure design, to ensure that in the charging process can effectively prevent overheating, overload and other situations, improve the safety and stability of the charging bank, eliminate any safety risks.
5, lithium cobalt oxide (LiCoO2) Lithium cobalt oxide is commonly known asThe common form of the liquid lithium-ion battery is 18650 and the square shape. The 18650 battery is a cylindrical battery with a diameter of 18 mm and a height of 65 mm (it looks like a larger version of the No. 5 battery), which is widely used in notebook batteries. Due to its common use with notebook batteries, more than 60% of mobile power supplies on the market now use 18650 batteries.
Xiaomi mobile power is the latest mobile charging device launched by Xiaomi company, which has been released in four versions: capacity 16000mAh, price 129 yuan; Capacity 10400mAh, price 69 yuan; Portable power supply 5200mAh, price 49 yuan; Ultra-thin mobile power supply 5000mAh, the price is 49 yuan. I believe that many people of my age have heard that Rome is this brand, and there are many people who have used it. Before, in high school, the dormitory was cut off every night, so playing mobile phones at night had to prepare a charging bank. At that time, I also bought a 20,000 MA charging bank of Rome. At that time, there was no concept of fast charging, so although the charging speedNot so fast, but it's really durable.
Battery type: Lithium-ion battery recommended reasons: charging speed, this mobile power is very aesthetic, easy to carry. There is also a small current charging function, you can charge the headset, very good, exquisite workmanship, frosted texture, smooth interface, no defects.
Charging treasure recommended as follows: Millet, Pinwin, Huawei, Patriot, Rome Shi. Founded in 2010 and listed in Hong Kong in 2018, Xiaomi is an Internet company with mobile phones, smart hardware and IoT platforms as its core, driven by innovation and through a unique "ecology.Chain model, investment has driven many entrepreneurs in the industry, around the mobile phone business to build a three-layer product matrix of mobile phone accessories, smart hardware, and consumer products.
PinShengyan selection is a mobile power supply, with its own line, small and portable, support Apple fast charge and other characteristics. Its shape design is simple and beautiful, reliable quality, short charging time, very suitable for travel, business trips. The large capacity mobile power supply has a simple and refreshing appearance, with a capacity of up to 10400mAh, which can provide a long time of battery life support for digital devices.
1, Millet magnetic wireless charging treasure can not only be used when charging, but also can be used as a horizontal magnetic wireless charger when discharging, to achieve dual charging of charging treasure and mobile phone. The wireless charging module is equipped with multiple safety functions such as foreign body detection, temperature protection and short circuit protection. Overall, the Xiaomi Magnetic Wireless Charger combines the advantages of a vertical wireless charger and a magnetic wireless charging mobile power supply.
2, will provide a solution, yesSend a base or instructions to purchase at a nearby Xiaomi experience store. Online purchase: If Xiaomi customer service is unable to provide the base, you can try to search for the sale of the base on Xiaomi's official website or other electronic product sales websites.
3, Millet magnetic wireless charging bank with a USB-C two-way fast charging interface, support 12W slow charge output, 20W fast charge input, 2 hours can be full of itself.
1, headset assembly parts to maintain pressure isMade the split wireless Bluetooth headset waterproof. By using the expandable pressure holding air bag to maintain the pressure continuously after the installation of the headphone cable, the cable located in a narrow space can be fully pressurized.
2, clean the earphone regularly, wipe the stained area with cotton swabs and alcohol, and wait until the earphone is completely dry before use. Store the earphones. If you do not use the earphones for a period of time, put them in a box or bag and store them in a cool and dry place.
1. First chargeElectricity, you must use up the electricity in the headset and then charge it, and it cannot be charged intermittently, it must be full until. In other cases, you can wait until the Bluetooth headset is running out of power, or wait until the Bluetooth headset reminds you to charge. When the Bluetooth headset is about to run out of power, the Bluetooth headset indicator light will flash red every few seconds, and also accompanied by: dripping sound. At this point, you can charge the Bluetooth headset.
2, charge the charging box: when you do not use the headset for a long time, it is recommended to recharge the charging box and headset at least once a week to avoid battery damage. (1) Wired charging: The charging box can be used with a charger, mobile power or computerUse USB Type-C data cable for charging. (2) Wireless charging (wireless charging) : Please adjust the position of the charging box, align the center of the lower part of the charging box with the center of the wireless charger, and the indicator light indicates that it has been charged normally.
3, the headset charging method is as follows: split Bluetooth headset: generally have a charging bin, just put the headset into the charging bin, the headset will automatically charge. If it is wireless charging, the charging bin has wireless charging function, just put the mobile phone and other devices on the charging bin. Earphones with charging interfaces, such as hanging ear, bone conduction, and headsets: just plug in the earphonesThe cable can be charged.
4, choose the right charger. Generally, Bluetooth headsets have a dedicated charger, if there is no dedicated charger, you can find the charging interface (some are thin and round holes, some are MiniUSB universal interface) the same, and rated output power of the same charger to use. When charging, you should plug in all the plugs, not only more than half of them, so that the machine will be damaged for a long time.