Cause: The system program has a problem, resulting in the charging function of the hardware is abnormal, it is recommended to restore the phone can be used normally. The reason why the short circuit causes the Apple phone to be charged is probably caused by the short circuit of the charging interface, and there are a large number of spring firing pins in the charging interface of the phone, which can make the line closely connected to the plug of the charging data cable.
handThe case is too thick will affect the induction between the charging coil and the wireless charger in the phone, resulting in normal charging. Therefore, it is recommended to remove the protective case of the mobile phone before using the wireless charger to charge; The charging coil area in the mobile phone is small, and if the mobile phone is placed incorrectly when wireless charging is used, it will also lead to normal charging.
The reasons for iphone11 wireless charging failure are as follows: It may be that the mobile phone protection case is too thick, it is recommended to choose a thin mobile phone protection case or not use when using wireless charging. It may be that the phone is not aligned with the charging area of the wireless charger, it is recommended to check the wireless charger specification to determine the wirelessCharging area. It may be that the wireless charger is not suitable for the wireless charging system of the mobile phone, so it is recommended to use the charger that meets the wireless charging requirements of the mobile phone.
The iPhone system update will fix some system faults existing on the iPhone. If your iPhone11 suddenly fails to wireless charge, it may be due to the system incompatibility fault caused by the automatic update of the application. In this case, You'll need to manually upgrade your iPhone11 to the latest version to fix the problem.
Take iOS11 as an example, Apple 11 wireless chargingCharging is not because the system program has a problem, resulting in abnormal charging function hardware, it is recommended to restore the phone can be used normally. The iphone11 is a mobile phone released by Apple Inc., which was released on September 11, 2019. The iphone11 features an anodized aluminum and glass design, an A13 Bionic chip, and an ultra-wide-angle camera that supports 2x optical zoom.
1, due to the thickness of some mobile phone protective cases, or the material of mobile phone protective cases, may be shadowThe recognition function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protective case and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
2, check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Verify that the center of the phone is placed wirelessly during chargingThe center of the charging base, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
3, the charger is faulty, the charging cable is loose or damaged, the input power is insufficient, etc. Charger failure: Try to use the same specifications of the charger for charging, if it can be successfully charged, it is the original charger failure, to replace. Loose or damaged charging cable: Check that the charging cable is securely connected between the device and the power adapter. If the charging cable is loose or damaged, the current cannot be transmitted normally and the charge cannot be made.
4, different brands of models due to the difference in coil position,May lead to low charging efficiency or can not be charged, please put the mobile phone wireless charging area correctly in the wireless charger sensing area to try. Please do not use too thick or magnetic insulation material/metal material case, these cases may affect the charging efficiency or can not be charged, or even overheating to cause the phone can not be charged or damaged.
5, the mobile phone setting path is as follows: Set the battery, turn on the wireless reverse charging switch Please confirm whether your charging mobile phone battery is more than 20% if the mobile phone battery is less than 20%, please use the charger to charge the mobile phone first, and then wireless reverse charging after the battery is higher than 20%.The jacket is too thick, or the material of the mobile phone protective case may affect the identification function of the mobile phone wireless charger, it is recommended that you remove the mobile phone protective case and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
Check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
The charger is faulty, the charging cable is loose or damaged, and the input power is insufficient. Charger failure: Try to use the same specifications of the charger for charging, if it can be successfully charged, it is the original charger failure, to replace. Loose or damaged charging cable: Check that the charging cable is securely connected between the device and the power adapter. If the charging cable is loose or damaged, the current cannot be transmitted normally and the charge cannot be made.
When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally. Connect your phone directly to the wired charger to see if it can be charged.
Please check whether there are foreign objects between the two mobile phones Please check whether there are other substances between the two devices, such as bus card, metal ring, magnet, built-in metal protective shell, etc., if yes, please remove. Please check the answerWhether the receiving device is placed in the center of the back of the charging device will affect the charging efficiency, and the farther the location is from the center, the lower the charging efficiency, even beyond the effective charging range of wireless charging.
Please ask is "mate60pro wireless charging does not go in how to do" this problem? The methods that can be taken in this case are: make sure that the phone is compatible with the wireless charger, check the charger and the power adapter, and check the alignment between the wireless charger and the phone. Make sure your phone and wireless charger are compatible: Make sure your phone supports wireless charging and that the wireless charger is compatible with your phoneModel compatible.
1, because some mobile phone protective cover is too thick, or the material of the mobile phone protective cover may affect the recognition function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protective cover and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
2, the charging position is not correct check whether the phone is facing noneLine the center of the charging plate, if not, may cause the charging to fail. If there are obstacles between the charging pad and the phone, such as keys, coins, etc., it will affect the charging effect and they need to be removed. The phone case is too thick thick protective case may affect the charging effect, try to take down the phone case and then charge.
3, check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Confirm the charging processWhether the center position of the mobile phone is placed in the center of the wireless charging base, and remove other items (such as bus cards, metal and other substances) between the device and the wireless charger.
4, different brands of models due to the difference in coil position, may lead to low charging efficiency or can not be charged, please put the mobile phone wireless charging area correctly in the wireless charger induction area to try. Please do not use too thick or magnetic insulation material/metal material case, these cases may affect the charging efficiency or can not be charged, or even overheating to cause the phone can not be charged or damaged.
5, please check whether the phone is placed in the center of the back wireless chargeThe center of the panel. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally.
1, when the mobile phone cannot use wireless charging, please follow the following steps: 1, please check whether you are connected at the same timeWired charging devices that use wired charging and wireless charging at the same time will preferentially use wired charging.
2, Make sure that the phone and wireless charger compatible: to make sure that your phone supports wireless charging function, and the wireless charger is compatible with your phone model. Different phone models may have different charging standards, so you must use a wireless charger that supports your phone model. Check the charger and power adapter: Make sure that the wireless charger is working properly and that the appropriate power adapter is connected, and that the power adapter is securely plugged into the power outlet.
3. Check whether it is openedLine reverse charging switch The phone can be set as follows: Set the battery and turn on the wireless reverse charging switch. Please check whether the battery of your charging phone is above 20%. If the battery of the phone is lower than 20%, please charge the phone using the charger first.