1, open the car wireless charger: usually find the car's accelerator, and then use the car key to ignition the car, and then the wireless charger will automatically open. Put the helmet on the phone: Place the phone on the wireless charger in the car, and then put the helmet on the phone, taking care to ensure that there is a dense contact between the helmet and the phone.
2, Step 1: Install positioning to ensure that the wireless charger is stable and safeInstall it in the right place in the cab, choosing an area that neither slides nor obstructs the driver's line of sight. Step 2: Connect the power supply Plug one end of the USB data cable of the wireless charger into the car smoke outlet and connect the other end to the charger. In this way, the charger can draw power from the car's power source.
3, the use of wireless charging steps:! - First, find a convenient place in the cockpit that doesn't interfere with driving! -- Ensure that the wireless charger is firmly placed and easy for the driver to operate! --. Step one! -- : Fix the wireless charger in place! --, put one end of the USB cableI am using vivo mobile phone, after opening the wireless network, why will traffic? '> I use vivo mobile phone, turn on the wireless network, why will traffic?
If the vivo mobile phone is used, the data network is enabled while the phone is connected to WiFi, the WiFi network is preferred, and the data network is not used; When the WiFi network is disconnected, it will automatically jump to the data network.
. Due to objective reasons such as the user's position moving or wireless LAN signal coverage, the user automatically switches from the wireless LAN to the bee after moving the positionIf the user continues to use the network service, cellular traffic 2 will be generated. Due to router Settings or function failure, compatibility and other reasons, resulting in users can view the wireless icon in the upper left corner, but there is no real access to the Internet, at this time if the phone has network activity, it will generate cellular traffic.
In normal cases, if the mobile phone is connected to the wlan and data connection at the same time, the wlan is the preferred network. If the wireless network is not connected and the data connection is enabled at the same time, the mobile phone selects the data network, and data traffic is deducted. Traffic sources can be divided into straightAccess, search engines, external links three major parts.
Hello, many applications of smart phones need to connect to the network, so the traffic consumption is relatively large. It is recommended to reduce the traffic consumption as follows. Through: Settings - Traffic Monitor - Enable Set traffic limit, set warning and limit values, and view your traffic consumption in time. Use WLAN Internet access as much as possible and turn off the mobile network (by dropping down the notification bar to turn off).
If you use vivo mobile phone, you cannot access the Internet using the data network troubleshooting method: View the Settings of the mobile phone Open the mobile phone shortcut center(Slide down at the top or up at the bottom) Check whether the data network is enabled. Check the status of the mobile phone card to ensure that the balance of the mobile phone card is sufficient. If the phone is stopped due to overpayment, restart the phone after successful recharge. Check with your carrier whether the traffic limit has been reached. If necessary, you can replace the normal Internet access SIM card to confirm.
Open the Settings icon on your phone, then tap Battery on the Settings feature page. Once on the page, find wireless reverse charging. Then put the wireless reverse charging button on pointClick on it, and you're ready for wireless charging.
The specific steps are as follows: Open the home screen of the mobile phone and tap the Settings icon. On the Settings screen, select Battery. In the battery screen, find the "Wireless charging" option and tap on it. Step 3: Place the phone on the charger After the wireless charging function is turned on, the user only needs to place the phone on the wireless charger that supports the Qi standard to start charging. During the charging process, the user can check the change of the phone's power at any time.
First, locate and click the "Settings" icon on the desktop of the Huawei p30. In the Settings menu, locate and click the "Battery" option. On the battery Settings page, find the "Wireless Charging" option and click. In the pop-up prompt box, click the "On" button to enable the wireless charging function. At this point, place the phone on the wireless charger to start charging.
Open the Settings, click the battery, turn on wireless reverse charging, keep the device that supports wireless charging (mobile phone, wearable device, etc.) on, and place it in the center of the back of the current mobile phone to carry out wireless reverse charging. The device to be charged must meet the QI wireless charging protocol. Between the charged device and the phoneDo not place metal.
First click to open the p30pro desktop 【 Settings 】; Then under the Settings menu, find and click to enter [battery]; Finally, just click on the "Wireless reverse charging" switch in the battery interface, and stick the Huawei p30pro and other mobile phones back to back together to charge other mobile phones that support wireless charging.