Open the iPhone 13 widget screen and select the battery widget. Select a battery display status and click Add Widget. tapFinish the button in the upper right corner to display the battery level.
Specific steps To find the Settings for wireless charging of an Apple phone, first of all, open the "Settings" app of the phone. In the "Settings" menu, locate and click the "Battery" option. On the "Battery" page, you will see various Settings options related to batteries. Among them, you should be able to find an option called "Wireless charging" or "Wireless Charger." After clicking this option, you will be taken to the Settings page for wireless charging.
Step 2: Plug the charger into the power supply Plug the wireless charger into the power supply to ensure that the charger has enough powerTo charge the phone. In general, the charger will automatically turn on the charging mode after plugging in the power supply, but if it does not turn on automatically, you can manually press the switch button. Step 3: Place the Phone on the charger Place the iPhone 13 series on the wireless charger, back side up, and make sure there are no obstacles between the phone and the charger.
Open the iPhone 13's Control Center by swiping down the screen or tapping the battery icon in the status bar at the top right of the screen. Find the "MagSafe" option in the Control Center, if it is not displayed, click on "More Controls" and addIt is added to the control center. Click the "MagSafe" option to make sure it is turned on.
Because your Apple's original charging bank system does not support pop-up Windows. The original charging current of the Apple phone charger is constant voltage and constant current, which will not cause harm to the phone, but it does not support pop-up Windows. Non-original charger support pop-up window, but the quality is not good, will cause damage to the phone, not durable.
Pop-up function: When the magnetic charging bank is adsorbed to the iPhone12 seriesWhen on the mobile phone, the charging bank supports the pop-up function, and a window will appear on the mobile phone screen to display the battery information of the charging bank. No pop-up window function: The magnetic charging treasure does not support the pop-up window function, so when it is adsorbed to the iPhone12 series mobile phone, the phone screen will not display any battery information.
In addition, when using the shared charging bank, if the pop-up window of "Trust this computer" pops up on the mobile phone interface, you should be alert. As long as you click "Trust", the external device will have access to system information. Generally speaking, charging a mobile phone with a power bank will not have a pop-up prompt. If this happensDo not use the charging bank, and remove the charging bank in time.
Reason why airpods pro does not pop up: Airpods open popup window only supports Apple devices, and will not appear if connected to an Android phone. Solution: Pair a Bluetooth headset that fits with your phone. Airpods popup window needs a certain response time, do not close the charging case too quickly. Solution: You need to turn on the AirPodsEarphone charging case cover and wait a little while. Your headphones are too far away from your phone.
The reasons why AirPodsPro does not pop up may be: the headset is too far away from the phone; The phone has a delay, you need to wait about three to five seconds; The system was not upgraded; The phone did not turn on Bluetooth; It may be related to the phone case, you can remove the phone case and then pair. Apple AirPodSpro is a wireless Bluetooth headset released by Apple on October 29, 2019.
Reason why airpodspro doesn't pop up: The headset is too far away from the phone. The phone has a delay.You need to wait about three to five seconds. The system has not been upgraded. The phone doesn't have Bluetooth on. It may be related to the phone case, you can remove the phone case and then pair. May be the reason for wifi, after all, unlimited signal, there are many reasons that may cause interference.
First, make sure your iOS device system version is up to date and make sure Bluetooth is enabled. If the problem persists, try disconnecting and repairing the AirPods Pro, which may help restore the popup display. Second, check the AirPods Pro power, insufficient power may cause the pop-up window function to fail, ensure thatFully charged and properly placed in the charging case. Firmware version may also be the key to the problem.
The reason airpodspro doesn't have a popup window is that the headphones are too far away from the phone. The phone has a bug. Try restarting the phone. Maybe the system has not been upgraded, try to update the system. It's also possible that the phone doesn't have Bluetooth on. It may be related to the phone case, you can remove the phone case and then pair. AirPodsPro is a wireless earphone from Apple that supports active noise cancellation.
AirPods Pro popup needs a certain response time, do not close it too quicklyClose the charging box. Your headphones are too far away from your phone. The phone has a delay, you need to wait about three to five seconds. Calculator: The computer in the iPhone is usually used to do some simple addition, subtraction, multiplication and division.
1, the reasons are as follows: the main reasons are as follows: the mobile phone shell used by the first mobile phone is too thick, resulting in the wireless charging function can not be used normally; The first wireless charging is without pointing the phone at the corresponding area. When the iPhone can't be rightWhen wireless charging is often carried out, the answer can usually be found from the above two aspects. First of all, unlike ordinary charging methods, wireless charging requires a sense between the iPhone and the wireless charger.
2. No pop-ups appear. The iPhone8 supports wireless charging, but does not require a pop-up window, just need to put the phone on a compatible wireless charger to achieve charging. The iPhone8 supports the Qi charging standard, and as long as you use a QI-compatible wireless charger, you can achieve wireless charging. In addition, the iPhone8 also supports 5W fast charge, as long as you use the wireless charge that supports 5W fast chargeElectrical appliances, can achieve fast charging.
3. Support. Apple iPhone11 series support wireless charging, the series uses the international Qi wireless charging technology, just use the sensor charger that supports the Qi certification protocol can be wireless charging. The current Apple iPhone11 series can achieve up to 5w of wireless charging power.
4, first open the fiilccpro battery box Settings. Then find the "battery" option, click on the "battery interface", and find the wireless reverse charging on the page. Finally click the operation pop-up window appears, follow the specified actionid=' Why does Mi air2pro not pop up '> Why does Mi air2pro not pop up
1, there are two reasons for this situation, one is that the mobile phone system has not updated to the newer MIUI version, the other is that the phone model itself does not support. MIU pop-up window can be divided into three cases: ① the headset is opened in the headset case; ② The earphone is in the earphone case, long press the function button of the charging case for 2 seconds, and the earphone restarts to enter the pairing mode; ③ The earphones and mobile phones have been connected, and the earphones are not turned off in the box.
2, Xiaomi air2pro supports MIUIWindow function, the use of this function needs to update the mobile phone system to the latest version of MIUI, but this function is not supported by all Xiaomi phones.
3, about the millet air2pro no pop-up window problem, there are two main reasons: the mobile phone system has not updated to the latest MIUI version. Pop-ups require system support, so making sure your phone's system is up to date is the first step to fixing the problem. The phone model itself does not support the pop-up function.