Yes. The heating of the wireless charging board is normal, and the temperature of wireless charging heating is normal below 40 ° C, which will not cause the equipmentDamage. However, the heating temperature exceeds 50 ° C, it needs to be paid attention to, because it will have an impact on the equipment.
Environmental check: Ensure that the environment where the AP61 wireless charger is located is well-ventilated and free of any shelter. Confined Spaces can cause heat to build up, causing heating problems. Original Adapter Use: Make sure you are using the original adapter for the AP61 wireless charger. The use of non-original or low-quality adapters may cause electrical instability, which can lead to equipment overload and heating.
We all know that mobile phones are generally hot when they are plugged in and charged, even ifIf you are playing while rushing, you can simply be used as a hand warmer treasure in winter, this situation is not limited to the wired, the wireless charger is also the same when charging, and the temperature is no less hot than the wired, a small hand touch is simply touching the temperature.
Because the main structure of the wireless charger is a coil, the main structure of the device that your mobile phone receives wireless charging is also a coil, the coil overcurrent, heat is very normal, the general temperature rise is not too high.
The advantages of wireless charging of mobile phones are convenient: non-contact, one-to-many charging compared with the general charger, reducing the trouble of plugging, but also to avoid the interface is not applicable, poor contact and other phenomena, the elderly can also be easily used. Multi-purpose: a charger can charge multiple loads, and a family can buy a charger to meet the needs of the whole family.
Advantages: The equipment using wireless magnetic induction charging can be invisible, the equipment wear rate is low, the application range is wide, and the public charging area is relatively reduced; High technical content, easy to operate, can implement relatively long distance radio energy transferChange. Disadvantages: Although the equipment has high technical content, the economic cost of the equipment is higher and the maintenance cost is large; Because of the realization of long-distance high-power wireless magnetoelectric conversion, the energy consumption of the equipment is high.
Convenience The main advantage of wireless chargers is their ease of use. There is no need to carry additional charging cables and plugs, just place the phone on the charger to start charging. This is undoubtedly a huge convenience for people who travel a lot or work outside the home. Modern wireless chargers usually have a fast charging function, and their charging efficiency is not inferior to that of wired charging.
Advantages: The advantage of wireless charger is that we can charge the phone at the same time, no longer need to unplug the data cable. In addition, it can be taken at any time, which is more convenient than charging with a data cable. At the same time, it can provide certain support for the phone, making the phone charge more stable. Disadvantages: One disadvantage of wireless chargers is that the charging speed is relatively slow, and most wireless chargers only support 5W or 5W charging power.
Better interface durability Mobile phone wireless charging because there is no need to frequently plug and unplug the charging cable, so the data interface wear of the mobile phone will be reduced a lot. At the same time, the mobile phone wireless charging coil is not exposedIn the air, oxidative corrosion of the charging unit can also be reduced. The wired charging is often inserted and removed easily lead to wear, and the interface is exposed, which is easy to oxidation corrosion.
Self-made wireless charging can not bring the load reason: the internal resistance of the charger is already very large. There is a switching power supply inside the charger, and its oscillation circuit part has poor contact phenomenon, and it cannot be oscillated with a slight load. Measure whether the pin to ground voltage of the switching power supply stabilized oscillation thick die chip is normal, and the coreWhether the peripheral components are normal. Check whether the switching transformer is normal, and whether the 24V rectifier filter circuit components are normal, and so on.
Yes. Wireless charging board heating is normal, wireless charging heating temperature below 40 degrees Celsius is normal, will not cause damage to the equipment. However, the heating temperature exceeds 50 ° C, it needs to be paid attention to, because it will have an impact on the equipment.
Wireless charging itself will not cause damage to the battery, but the charging temperature is too high or too low and the charger material and other factors will have an impact, so it is recommended to use a regular genuine charger, and to avoid a long time of rapidCharge up. Wireless charging is a short-range wireless charging technology. Compared with traditional wired charging, it converts electromagnetic energy into electricity and transmits it directly to the receiver, so as to achieve the purpose of charging the mobile phone without connecting the charging line.
Does not support long-distance charging, may reach this technology in the future, what is wireless charging technology, according to a report in the United States, research institutions have developed a wireless charger that can be remote, this charger includes a transmitter with a plug, an electronic receiver, As long as the power supply is within a certain range, it can be transmitted to a terminal device with a receiver. Basically no damage: Wireless charging technology uses the principle of electromagnetic induction to transmit electrical energy through magnetic and electromagnetic fields, which has no direct damage to the internal structure of the mobile phone battery. Modern mobile phones have built-in wireless receivers with voltage and current ratings, so under normal use, wireless chargers are safe for mobile phone batteriesAll of them. The wireless charger has a high energy conversion rate, and can automatically adjust the current according to the battery capacity, avoid overcharging or overheating of the battery, and protect the battery safety. Generally speaking, wireless chargers do not harm mobile phones. The wireless charger uses electromagnetic induction technology, which transmits energy by using a magnetic field generated between coils, coupling the current from the charging disc to the mobile phone battery, for the battery, its charging process is no different from that of an ordinary wired charger. Wireless chargers have an impact on battery life. The use of wireless chargers has an impact on battery life mainly reflected in the followingFirst of all, wireless chargers generate current through electromagnetic fields to charge devices, and their charging methods may be slightly less efficient than wired charging. This means that some heat may be generated during the charging process. There is no difference between the two charging methods for mobile phone batteries. Wireless charging introduction: Wireless charging is completely harmless to the human body, there will be no radiation and the like. It can reduce the number of plugs and prolongs the service life of the mobile phone interface. There are protective Settings so you don't have to worry about the phone exploding for a long time. It is best not to take a very thick protective shell when charging, otherwise high temperature may occur when charging.