1. The touch area is located in the blank position on the back of the headset. Some functions of the headset can be controlled by clicking on the touch area, but the volume of the headset cannot be adjusted. The built-in infrared sensor of the headset can automatically identify whether the headset is automatically played in the ear, by double-clicking on, charging support 24 hours of battery life, the connection is very simple, only need to open it can be automatically identified.
2, on the entire edge of the headset. The touch area of the k66 Bluetooth headsetAcross the edge of the headset, note that touching too lightly will not trigger a cut or pause. The built-in infrared sensor can automatically identify whether the headset is playing automatically in the ear.
3. First of all, when there is a call on your phone, double-click the touch area on the right of minisok66 Bluetooth headset to answer the call on your phone, click again to end the call. Second, when you encounter a call that does not need to be answered, you can long press the touch area on either headset for about 1 second to refuse to accept the call.
4, can be used after connecting the phone through Bluetooth. Turn the Bluetooth slider to the rightSwipe right to turn on Bluetooth. Click search below to search for i12 Bluetooth headphones. This step is crucial. Click the exclamation mark to the right of the Bluetooth headset name. You just need to find the exclamation mark. Click device name. The device name is the symbol of each product.
5, side, bottom. Side: The switch on some Miniso Bluetooth headsets is located on the side of the headset, usually above or below the headset, and you can turn the headset on or off by gently pressing or sliding the switch on. Bottom: Other Miniso Bluetooth headsets have an on-off key located at the bottom of the headset, usually in the middle of the headsetThe root audio cable is connected to the hole of the sound output as the radio antenna, and then switch to the radio function, and use the "and" or the - and symbol to tune the station.
2, for reference. When my Leiber A300 Bluetooth speaker is charging, the red light is steady on, and when the indicator light turns blue, it means that it is full, and it takes about 3 hours, it can be completely out of power to full charge, and then it can listen to music continuously for 10 hours.
3, is there 4 lights, no power after charging is of course a single light, such as 4 lights are lit is full.
You can use the Apple charging bay. Different models of Bluetooth headset charging ports are basically not universal, if it is the same model of Bluetooth headset can be basically universal. Because the technical patents of each manufacturer are different, the charging ports studied will also be different. It is best to buy the charging bin specified by your Bluetooth headset model, so you do not have to worry about compatibility problems, and you can also tell the business about your headset model to see if it is applicable.
Medium grade. minisoThe Bluetooth headset belongs to famous products, and its popularity is still OK. And the products produced by Miniso pay great attention to quality and cost performance, so it is a very good Bluetooth headset. The disadvantages of miniso's Bluetooth headset are the lack of digital display in the charging bin, the in-ear wearing is still not as comfortable as the semi-in-ear, and the use process sometimes has breakpoints.
MINISO mobile power supply uses the mobile phone charging head to charge. Mobile power, English mobilepowerpack (referred to as MPP), a set of power supply and charging functions in one portable charger, can be used for mobile phonesAnd other digital devices anytime, anywhere charging or standby power supply. Mobile phones, digital cameras, MPMPPDA, PDAs, handheld game consoles and other digital products can be powered or charged anytime and anywhere.
Turn on the Bluetooth function of your phone or other device and disconnect the Bluetooth headset from the device. Place both headphones in the charging bay at the same time, then close the charging bay. After about 30 seconds, open the charging bay again. At this point, the headset should enter pairing mode. Turn on your phone's Bluetooth and connect your Bluetooth headset. For specific brands: Miniso Bluetooth Headset Turn on the headset Power onclose.
The first case is that the power of the other headset is insufficient, you need to charge the headset, and then take out the connection after it is full of enough electricity. The second case is the Bluetooth headset, which is not connected with the socket corner of the base when charging the bin, which leads to a long time without returning to zero. In this case, you need to wipe the Bluetooth headset with clean paper, and then wipe the charging base, put the headset in, close the charging compartment cover for 10 seconds before taking it out.
First, wear minisok66pro2 and make sure it's connected to your device. Second, on the iPhone,On iPad or iPodtouch: Go to Settings and tap the AirPods Pro name near the top of the screen. Finally, tap to turn off "Enable charging case sound" and you're done.
The indicator turns blue. When the Bluetooth headset is connected to the power supply and starts charging, the red indicator light on the Bluetooth headset is long, indicating that it is charging. Generally, the charging time of Bluetooth headphones is kept within 2 hours, becauseToo long charging time will directly lead to aging or even burning of the machine circuit board, and there will be a variety of machine failures, such as reduced standby time, frequent disconnection, shortened call distance, and inability to turn on.
Blue. According to the query of relevant information: Miniso brand Bluetooth headset when fully charged, the indicator will turn red, and will blink during the charging process, when the charging is completed, the indicator will turn blue and stop blinking. Miniso is a brand focusing on young consumer groups, and its products have been welcomed by many young people with simple, natural, high quality and affordable featuresYes.
Blue. MINISO K66Pro is one of its TWS real wireless headset products, following the design style of Apple in appearance, the charging box is rectangular design, the headset is handle-like in-ear design, and the whole body uses pure white color. The Bluetooth 0 chip is used in the configuration, which supports automatic connection and touch operation.
If the indicator is steady red, it indicates that the battery is being charged. Indicator If the blue indicator is steady on, the charging is complete. Bluetooth headset is not connected to the charger: the indicator is off, indicating that it is powered off. If the indicator blinks red and blue alternately, it indicates entryPairing mode. If the blue indicator blinks at intervals, the pair is successfully paired. When in use, the indicator turns red, indicating that the headset battery is insufficient.