1, when the engine starts, the vibration frequency of the seat is just inPeople are most sensitive to vibration areas, between 2-4Hz and 8-14Hz, which can easily cause irritability. At the same time, the car restarts automatically from the shutdown state, and then starts the power output smoothly, and some models will have a lag of about 2 seconds. In addition, the battery is still a lot more expensive, and finally the money is not saved, and the use experience is worse. Many friends think it is the most chicken ribs configuration.
2, automatic parking. This configuration to say chicken ribs, in fact, also useful, only for those novice drivers useful. But after novice drivers become familiar with the car, they are also more willing to reverse by looking in the rearview mirror. So this configuration is for mostYou will see a switch, which is the entrance to the wireless charging function. Next, please pair your mobile phone with the Bluetooth system of Hongqi HS5. Make sure the Bluetooth function is enabled on the phone and follow the prompts of the vehicle system to connect.
2, Red Flag HS5 mobile phone wireless charging, only need to put the mobile phone at the back of the shift lever, the rectangular area in front of the central armrest can be carried out, but in the case of vehicle power on, the specific operation steps are as follows: open the door on the side of the cab. Press the brake pedal. Press the one-touch start button to start the engine. The dashboard lights up, proving the engineIt has been started. 3, the Red Flag HS5 wireless charging function is very convenient, just put the mobile phone in the rectangular area in front of the central armrest, and then ensure that the vehicle power is connected. Here's how to do it: Open the door and get into the cab. Press the brake pedal to make sure the vehicle is stationary. Press the one-click start button to start the engine. Wait for the dashboard to light up and confirm that the engine has started.
4, open the cover of Hongqi HS5, connect the mobile phone and Bluetooth, and enable the charging function in the setting, follow the operation instructions to complete the operation of enabling the charging function.
5, Red Flag HS5 mobile phone wireless charging. [Free access to the bottom price] Only need to put the mobile phone at the back of the shift lever, the rectangular area in front of the central armrest can be done, but it should be carried out under the condition of the vehicle power on, the specific operation steps are as follows: Open the door on the side of the cab. Press the brake pedal. Press the one-touch start button to start the engine. The dashboard lights up to show that the engine has started.
6, Hongqi HS5 brings great convenience to the owner, especially its wireless charging function. Simply place the phone in the rectangle in front of the center armrest behind the shift lever to chargeWithin the area, charging can be easily completed, making driving more convenient and comfortable. Delve deeper into the Red Flag HS5, whose interior and exterior design are equally striking.
1, the charging port of the small pedal is located on the side of the body, above the pedal. The charging port of the small pedal is located on the side of the body, and the specific position is above the pedal. The charging port has two covers, which can be opened to reveal a charger jack or wireless charging button. Tailing Electric Vehicle is Shenzhen Tailing Technology Group Co., LTD in 2004The brand is committed to providing consumers with new energy vehicles that run farther.
2. The charging port of the tram is under the seat. The charging port position of the electric vehicle is commonly connected to the position of the foot pedal directly below the seat, and there will be a square plastic cover, which will be lifted up and plugged in the charger to charge the electric vehicle. Tailing Electric Vehicle is an intelligent electric vehicle launched by Shenzhen Tailing Technology Group Co., Ltd. in 2004, which is committed to providing consumers with new energy transportation that runs farther.
3, Bell electric car charging port inUnder the seat, on the side. Electric vehicle is a common means of transportation, the structure is relatively simple. The main components of an electric vehicle include the frame, the motor, the battery and the controller. The controller is a part of the electric vehicle used to control the vehicle circuit, and the controller is generally fixed under the rear seat.
4. Charge. The two holes of the Tailing v1plus foot pedal are charging holes for charging. Taituzu V1Plus is an electric bicycle with a top speed of 25 km/h, which is the top speed of electric bicycles in line with national regulations.
5, lighting system: at night or poor visionTurn on the headlights and low light to ensure driving safety. Instrument panel function: The instrument panel of the electric vehicle will display information such as power, speed, riding mode, etc., so that the rider can know the vehicle status at any time. Charging and maintenance Charging method: Find the charging port, connect the charger for charging. When charging, ensure that the charger and electrical outlet are secure.
6, quality: this piece of Shenzhen Tai Ling champion, repair rate is very low. Shenzhen Tai Ling is a more pragmatic enterprise, the intended advertising advertising funds are all used in production, although the reputation is slightly less, but the quality is higher than other brandsLow. Sales: New Day, Yadi, Tai Ling, immediately, Lvyuan go hand in hand, it is difficult to tell even. These five brands account for about 30% of total sales for the year.
1. The wireless charging button of the third generation Haval h6 is located on the center control panel, which is convenient for users to charge compatible wireless devices at any time. The following will introduce the relevant characteristics of Haval H6 in detail: Power performance: Haval H6-0T intelligent four-wheel drive version is equipped with GW4N20- independently developed by Great Wall MotorThe 0GDIT engine, with a maximum power of 155KW and a peak torque of 325N.m, provides users with strong and stable power.
2, the third generation Haval h6 wireless charging button is located on the center control panel. The following is about the relevant introduction of Haval H6: Power Haval H6-0T intelligent four-wheel-drive model is equipped with GW4N20-0GDIT engine independently developed by Great Wall Motor, its maximum power is 155KW, the maximum torque is 325N.m.
3, wireless charging function: Haval H6 wireless charging workIt can be integrated near its USB port and cigarette lighter port. This is a convenient design that makes it easy for the driver to charge while driving. Design highlights: Haval H6 adopts a new family design, showing a unique charm. The hexagonal air intake grille on the front face is commanding and striking, and the chrome trim of the slender banner enhances the sophistication of the interior.
4, the wireless charging button of Haval H6 is usually located near the USB port or cigarette lighter port in the car, which is convenient for the driver to easily touch and start the wireless charging function. This design reflects the Haval brand's careful care for user experience. Wireless charging technology,As a convenient mode of electric energy transmission, it has been widely used in the automotive industry.
5. The wireless charging button of Haval h6 is located at the USB port and cigarette lighter port. The Haval h6 is a car with a new family design language, the front with a hexagonal air intake grille, the interior with a slender banner chrome trim, the front light set with sharp lines, and the front surround is full of three-dimensional. The interior of the h6 features a floating LCD dashboard, a knob shift mechanism, plenty of soft materials and a piano-painted panel to enhance the interior layer.
6, Haval h6 wireless charging button in: USB port and cigarette lighter port. The following is about the relevant introduction of Haval h6: Appearance: adopt the new family design language Front face with hexagonal air intake grille interior with slender banner chrome decoration front light group line sharp front surrounded three-dimensional. Interior: Equipped with a floating LCD dashboard shift mechanism to knob style plenty of soft materials and piano paint panels enhance the interior layer.
1. First of all, please make sure you have opened the hood of Hongqi HS5 and found the wirelessCharging function control panel. Here, you will see a switch, which is the entrance to the wireless charging function. Next, please pair your mobile phone with the Bluetooth system of Hongqi HS5. Make sure the Bluetooth function is enabled on the phone and follow the prompts of the vehicle system to connect.
2, the first step: plug the supporting wireless charger into the power socket, and ensure that the charged device is within the charging range. Step 2: Place the charged device in the charging area of the wireless charger. Step 3: Wait for a moment, the charged device will start wireless charging. After starting charging, you can use the setCheck its charging status.
3, first of all, ensure that the vehicle is in a stationary state, press the brake pedal, press the one-button start button to start the car. Next, connect your wireless charging compatible device to the car via a USB port and activate the Red Flag H5's wireless charging function with a simple connection. Please note that only phones that support wireless charging should work with it, otherwise the device will not react.
1, Red flag H5 wireless charging use method: Press the brake pedal, press the one-button start button to start the car, connect the USB port, connect the external device to the USB port can be used. It should be noted that only the mobile phone itself has the wireless charging function to use the wireless charging of Red Flag H5, otherwise there will be no reaction on it.
2, If you want to enable the wireless charging function of Hongqi H5, please follow the following steps: First, press the brake pedal! -, then tap the one-click start button to start your car. Then, simply connect the external device that supports wireless charging to the USB port to enjoy a convenient wireless charging experience. Important mentionNote: Only the mobile phone with wireless charging function can realize wireless charging on the Red Flag H5, otherwise the device will not react when placed.
3, the use of the wireless charging function of the car is as follows: First, the mobile phone with wireless charging function needs to be placed in the center console area of the Red Flag h5. Then make sure the phone is aligned with the wireless charging area, and start the vehicle. The wireless charging function is turned on by default, and charging can be achieved when the mobile phone supports wireless charging.
4, the Red flag H5 wireless charging function is very convenient to use. First, you need to start the car and can passDo this by pressing the brake pedal and pressing the one-click start button. After starting the car, find the USB port on the center console, place the mobile phone that supports wireless charging in the designated charging area, and the mobile phone can start charging. Please note that only phones with wireless charging will be able to use this feature.