There is a certain amount when the phone is chargingThe temperature rises, which is normal. Stand and mobile phone have charging temperature protection mechanism, please rest assured to use. 2) If the fever is serious, it is recommended that users purchase a regular manufacturer's adapter through regular channels to use with the bracket. If the fever is still serious under constant temperature, it is recommended to power off and continue to use the product after cooling. In special cases, please report and guide the after-sales application according to the after-sales policy of the purchase channel.
Use a cigarette lighter to power the support, and try not to share the power with other devices to ensure the normal and stable operation of the support; It is recommended to remove the mobile phone case, the mobile phone case is too thick will lead to wireless charging instability. Check whether the cigarette lighter usb converter meets 5V /2A and the power matches. Try to remove the phone case can be powered on, the phone case is too thick will also affect wireless charging.
When encountering the instability of wireless charging of a small car bracket, you can try the following steps to solve it: Optimize the warm air port Settings: Please ensure that the warm air port at the position of the bracket is properly adjusted to avoid overheating caused by direct blowing. Try to change the tuyere to the wind mode at the foot, reduce the temperature of the phone, and help the normal operation of wireless charging.
Use a cigarette lighter to power the stand, and try not to share the power with other devicesQuestion. The battery is broken or has reached the end of its useful life, which needs to be replaced.
2, small degree of charging is generally about 8 to 10 hours, but a few are fast charging, can be filled in three hours.
3, small degree Bluetooth headset charging is not satisfied, please check whether there is a problem with the charging plug and line, followed by whether the charging time is up to standard, if both are not likely to be the headset itself.
4, indicating that the piece of your small degree of charging is faulty. Specific circuit board components have problems or internal charging line problems, it is recommended to find professional maintenance personnelFix it.
5, small speaker is no built-in battery, so there is no way to charge, there is no concern about how long it can be fully charged. Xiao Du Speaker is Baidu's artificial intelligence assistant, powered by Baidu's conversational artificial intelligence operating system DuerOS, built-in ARM Cortex A53 quad-core processor. Small degree speaker power supply is 12V/1A power adapter, small degree speaker has no built-in battery, there is no way to charge, there is no long to be full of the problem.
6, if there is no problem with the power plug and socket, then it may be a small device itselfBarrier. At this point, you can try the following actions to solve the problem: (1) Restart the device: Long press the power button on the small device and select the "Restart" option. This may resolve some temporary software glitches. (2) Check the battery: If your small device is rechargeable, make sure its battery is fully charged.
2, do not have electric bulbs. According to the product introduction on the official website of Xiaodu Smart Home, Xiaodu Smart Home series provides a variety of types of light bulbs, including wireless charging bulbs that do not require a power cord connection. This light bulb has a built-in battery, which can be charged through a wireless charging base, and it does not need to be plugged in when using, which is easy to carry and move.
3, when the wireless charging of a small car bracket is unstable, you can try the following steps to solve it: Optimize the warm air port Settings: Please ensure that the supportThe warm air outlet at the position of the frame is properly adjusted to avoid overheating caused by direct blowing. Try to change the tuyere to the wind mode at the foot, reduce the temperature of the phone, and help the normal operation of wireless charging.
4, can be wireless charging mobile phone battery life, in the car scene to provide users with a safe and interesting intelligent experience.
1, wireless charging heat is similar to normal charging, heat is mainly due to small degree Bluetooth APP power superposition caused by mobile phoneTemperature detection will be carried out, if the temperature is too high, it will automatically reduce the charging current or even stop charging, which will not harm the phone.
2, when the phone is charging, there is a certain temperature rise, which is normal. Stand and mobile phone have charging temperature protection mechanism, please rest assured to use. 2) If the fever is serious, it is recommended that users purchase a regular manufacturer's adapter through regular channels to use with the bracket. If the fever is still serious under constant temperature, it is recommended to power off and continue to use the product after cooling. In special cases, please report and guide the after-sales application according to the after-sales policy of the purchase channel.
3The accurate sensing of wireless charging function may be affected by the impact of the housing. Replace the adapter: If the heat is serious, it is recommended to buy a regular manufacturer's adapter to use with the bracket. If there is still heat under constant temperature, it is necessary to power off and cool down first, and then restart. Charging cable selection: Replace other charging cables to test wireless charging and confirm whether the problem is caused by the charging cable.
4, it is recommended to remove the mobile phone case, the mobile phone case is too thick will lead to wireless charging instability. Check whether the cigarette lighter usb converter meets 5V /2A and the power matches. Try to remove the phone case can power, the phone case is too thick will also shadowSound wireless charging. If your phone is too large or too long, the holder may not be aligned with the magnetic field sensing area of the phone.
5, or the background of the mobile phone to open more apps in high-power mode, when the mobile phone temperature is higher than 35 ° C, the mobile phone will start charging current limit or stop charging protection policy, resulting in low wireless charging efficiency or wireless charging function closed. Please close the warm air outlet where the stand is placed separately or adjust it to the mode of air discharge under the foot, or close the unused apps in the background to reduce the power consumption of the phone. The wireless charging function can be used normally when the temperature is lower than 35 ° C.
6. Use a cigarette lighterPower supply for the bracket, try not to share the power with other devices to ensure the normal and stable operation of the bracket; Remove the phone case, the phone case is too thick will lead to wireless charging instability.
1. Ensure that the minor device is turned on and in standby state. If you are using a smartphone, you will need to download and install the Mini Smart Speaker app. Once the app is open, look for the "Add new device" or "" button. Follow the prompts in the application, by scanning the provided QR code or performing other specified operations to matchFor small degree devices with mobile phones.
2. Make sure that the small device is powered on and on. Open the "Xiaodu" or "Baidu Smart Speaker" app on your smartphone or tablet. In the application, select the "My Device" or "Device Management" option. Browse and select your "Small Degree" device, then click "Set Up Network". The app will guide you through your Wi-Fi Settings.
3, open the small phone watch setting interface. Usually, this can be done by swiping on the watch's home screen or tapping the appropriate Settings icon. In the Settings screenFind and click on the Network or WiFi option. This will bring you to the Settings page for your WiFi connection. On the WiFi Settings page, the watch automatically scans for nearby WiFi networks and lists available networks.
4, the operation steps of the small degree smart screen to connect to WIFI: open the small degree audio APP, and then click the use Baidu account button below. On the home screen, click the Add Device option. Long press the Start button and click Continue. The APP will automatically configure the network. After the APP has configured the network, you can enter the WiFi name and password in the pop-up windowMHM. Here, the small audio connection WiFi operation has ended.
5, first open the small degree application in the mobile phone to enter, select "Add device" in my page. Then in the open page, select the "small speaker series" option, as shown below. Then in the open page, select the "Start Configuration" button, as shown below. Then, in the open page, enter the WiFi name and WiFi password and select one-button distribution network, as shown in the following figure.
6. To connect a low-level device to Wi-Fi, perform the following steps: Turn on the low-level device and ensure that it is powered onState. For smartphones, you need to download and install the app for the small speaker, and when you open the app, you'll see an option to "Add Device." Scan the QR code in the app or follow the prompts to pair the small degree device with your phone.