中文English
1, What if the juicer is not charged 2, Can Millet portable juicer be charged? 3, Murphy juicer charging does not go in 4. Why can't the juicer charge? 5, Juicer is put away f...

Wireless juicer does not charge into electricity (wireless juicer does not charge into electricity)

How to do if the juicer is not charged

1, check whether the socket is inserted backwards, the plug is connected to the power supply. Or the reason is the power configurator, some are not original, the output power is relatively low, there will be no charge. You can also change a charging head to try to see if the charging head is burned out leading to no charge, if it does not work, it is recommended to send it back to the manufacturer for maintenance.

2, when you find that the juice can not be charged after a long time, first check whether the charger or the power cord is damaged.If you find damage, try replacing the charger or power cord to see if it fixes the problem. If there is no problem with the charger or power cord, next consider that the battery may be damaged or has expired. Batteries naturally age over time, which can lead to an inability to charge.

3, charger or power cable damage: Check whether the charger and power cable is damaged, you can try to replace the charger or power cable. Battery damage or expiration of life: If the battery of the juicer has been used for a while, there may be damage or expiration of life, and the battery needs to be replaced. Circuit fault: internal juicerCircuit failure may also lead to failure to charge, you can contact the after-sales service for maintenance.

4, juicer problems; Charging line circuit short circuit; The charger may be plugged in the wrong way, the socket is not plugged in; If this problem occurs in life, please check in the following way: power on again, check the wire and power supply, if it is still not good, it is a hardware problem, and can only be sent to the repair service station for maintenance.

Can Millet portable juicer be charged?

1, there are two possibilities, the first is the reason for the charger, the charger is notVoltage or no current output, you can use a multimeter to test its charging output to see if it is normal. If the charger is normal and has normal voltage and current output, it should be a battery problem. Long-term loss of power and other conditions are not conducive to battery maintenance. You may want to consider replacing the battery with a new one so that it can be used.

2, this may be a charging line or interface out of the problem, you can try to change a charging line to see whether it is OK, or change a plug-in interface.

3, the reason why the red light of the juice glass flashes is that it is not fully charged, and it will turn green or blue when fully chargedLight, if the red light is always on, it is recommended to go to after-sales repair. The juicer cup must be placed in the correct position on the charging base. The white light flashing indicates that the juicer lid must be turned upside down while charging. The charging cable with the built-in wireless dock connects to a 5V / 1A USB standard adapter at one end and the wireless dock at the other end.

4, you can try the following steps to solve: check whether the correct charger and charging cable is used, make sure that they are original parts or certified compatible parts. Check whether the charger plug is tight and the power supply is normal. Check the juicer for residual fruit residue or juice, if so, pleaseClean it up first, and then charge it.

5, you want to ask is millet juice cup charging when the light is not bright for a while how to do? When the millet juice cup is charging, the light will not turn on for a while. Solution: Check the power supply interface of the juice extractor and confirm whether it is inserted correctly. Check that the battery of the juicer is connected to ensure that the battery is not damaged. Check the power switch of the juicer and confirm whether it is switched on.

Moffy juicer charging does not go in

Mofei juicer charging does not go in the reasons are as follows: juicer problems; chargingLine circuit short circuit; The charger may be plugged in the wrong way, the socket is not plugged in; If this problem occurs in life, please check in the following way: power on again, check the wire and power supply, if it is still not good, it is a hardware problem, and can only be sent to the repair service station for maintenance.

If it is not installed in place, it may be that the voltage is too low, this time only need to check whether the voltage at home is too low, whether the plug is connected. If you try the above methods or can not be charged and can not start, that is, there is a problem with the hardware of the juicer, you can only send to the repair service station, please professional peopleTo fix the juicer.

The reason why the juice glass is flashing red is that it is not fully charged, fully charged will be green or blue, if it is always red, it is recommended to go to after-sales maintenance. The juice cup must be well positioned for the charging base limit position, and the white light blinking indicates that in the charging process, the juice cup must be turned upside down on the base, with the lid facing down.

The battery may be low or the charging cable is improperly connected. If the battery is insufficient, the white light flashes when charging because the battery cannot start normally. The juicer cup needs to be fully charged for normal use. When the charging cable is connected to the juicer cup, such asIf there is loosening or falling off, the battery can not be charged normally, and thus cannot be started. Therefore, checking whether the charging cable is well connected is one way to solve the problem.

Why can't the juicer charge?

Check whether the socket is inserted backwards and whether the plug is connected to the power supply. Or the reason is the power configurator, some are not original, the output power is relatively low, there will be no charge. You can also change a charging head to try to see if the charging head is burned out leading to no charge, if it does not work, it is recommended to sendReturn to the factory for maintenance.

When you find that the juice can not be charged after a long time, first check whether the charger or the power cord is damaged. If you find damage, try replacing the charger or power cord to see if it fixes the problem. If there is no problem with the charger or power cord, next consider that the battery may be damaged or has expired. Batteries naturally age over time, which can lead to an inability to charge.

The juicer is out of order; Charging line circuit short circuit; The charger may be plugged in the wrong way, the socket is not plugged in; If this problem occurs in your life, please troubleshoot it in the following way: Power offPower on the source again, check the wire and power supply, if it is still not good, it is a hardware problem, and can only be sent to the repair service station for maintenance.

The charger or power cable is damaged: Check whether the charger and power cable are damaged, and try to replace the charger or power cable. Battery damage or expiration of life: If the battery of the juicer has been used for a while, there may be damage or expiration of life, and the battery needs to be replaced. Circuit fault: The circuit fault inside the juicer may also lead to failure to charge, you can contact the after-sales service for maintenance.

The juicer can not be charged may be the reason for the charging jack, firstFirst check to see if the socket is inserted backwards, whether the plug is connected to the power supply, or the cause of the power configurator. If it is not the original charging line or plug, the output power is relatively low, there may be no charge. In addition, you can change a charging head to try to see if the charging head is burned.

The juicer is put for a long time and cannot be charged

Check whether the socket is inserted backwards and whether the plug is connected to the power supply. Or the reason is the power configurator, some are not original, the output power is relatively low, there will be no chargeSituation. You can also change a charging head to try to see if the charging head is burned out leading to no charge, if it does not work, it is recommended to send it back to the manufacturer for maintenance.

When you find that the juice can not be charged after a long time, first check whether the charger or the power cord is damaged. If you find damage, try replacing the charger or power cord to see if it fixes the problem. If there is no problem with the charger or power cord, next consider that the battery may be damaged or has expired. Batteries naturally age over time, which can lead to an inability to charge.

The juicer is not charged. It may be charging