Fast charging refers to a fast charging technology designed to provide faster charging speeds and better charging efficiency. The technology was originally developed by companies such as phone maker 360 and Qualcomm. It is based on Qualcomm Quick Charge fast charging technology, which allows the phone to be fully charged in a short time, and does not heat up during charging, thus ensuring the stability and life of the phone. 360 Fast charging has the following advantages.
The whole process of power saving king charging includes fast charging and continuous chargingThree stages of trickle charging. After the first two stages, although the system power display 100%, but in fact the battery has not really reached saturation state. At this point, the remaining capacity can only be replenished by a tiny pulse of current, and this stage usually takes 30-40 minutes. All three stages are completed, and the battery can really reach a good state of saturation.
The power saving king breaks down the traditional charging process into three steps, which are: fast charging, supplementary charging, and trickle charging. 360 not only accurately estimates the battery power, but also combines the three charging methods, and the charging process is gradual, so as to achieve the rightMaximum battery protection. Stage one: Fast charging. In this stage, the battery is quickly charged to 80% in a constant current manner, but it still needs to be recharged to fully charge the battery. Stage two: Recharge.
is the charging voltage. Dc electric vehicle charging station, commonly known as fast charge, is a power supply device that is fixed outside the electric vehicle and connected to the AC power grid to provide DC power for the non-on-board electric vehicle power battery. The input voltage of the DC charging pile adopts the three-phase four-wire frequency of 50Hz and the output is adjustable direct current, directly charging the power battery of the electric vehicle. The DC charging pile adopts three-phase four-wire systemClick the scan code on the phone screen to charge it. After charging, click Stop charging in the service number, and then unplug the charging cable, charging is complete. Fast charge is what we call DC charging, in general, the DC voltage of fast charge will be greater than the battery voltage.
2, to carry out the fast charge of BAIC ex360, first of all, the charging line on the fast charging pile needs to be tightly inserted into the charging mouth of the vehicle. After confirming the successful connection between the electric vehicle and the charging pile, charging is started through the code scanning function on the mobile phone screen. After charging is complete, click Stop charging in the service number, and then safely unplug the charging cable.
3. Insert the charging cable on the fast charging pile into the charging port of BAICex360, be sure to plug it tightly. After the charging cable is plugged in, it shows that the electric vehicle is successfully connected to the charging pile, and then click the scan code on the phone screen to charge. After charging is complete, click "Stop charging" in the service number, and then unplug the charging cable. Fast charging is what we call DC charging. In general, the DC voltage of the fast charge will be greater than the battery voltage.
4. The quick charging operation of BAIC ex360 requires the following steps: First, firmly insert the charging line of the quick charging pile into the charging port of the vehicle.After the connection is confirmed, start charging through the mobile phone scanning function. After charging, stop charging through the service number, and then unplug the charging cable, that is, complete. In the process of fast charging, be sure to pay attention to the battery temperature to avoid unbalanced charging and virtual power problems caused by battery overheating! --.
1, please check whether the mobile phone charging interface is loose or there is dust and debris; Replace the charger and data cable that support fast charge.
2, may be the data cable or charger problem, recommendedOriginal data cable and charger.
3, the display is in the charging state, but it is not actually charged to the power, you can check the following: the charger is damaged; Whether the data line is damaged; Loose power interface and data cable interface caused by long use time; Whether the phone has malfunctioned; Whether the panel is aging. The mainboard circuit is damaged. If the above situation is still not solved, it is recommended that you contact the official maintenance point of the mobile phone terminal.
4, like this, there are generally two cases. The first case is that there is a problem with fast charging, which may be that the data line is broken or the transformer insideThere is a problem. There is also the case that your battery has a problem and can no longer be charged inside.
5, fast charging speed. You try to replace a high-quality charging head and charging cable showing 1-2a, feel the charging speed, no, try to shut down the charging speed, feel the charging speed. Still not, try to restore factory Settings, if the above is invalid, need to return to the factory. Because the turbine charging control part is inside the mobile phone, the electronic circuit is controlled, and only when the external software is solved can the electronic fast charging controller be suspected of damage and can only be returned to the factory for maintenance.