First, check whether the "Wireless reverse charging" function is enabled in the "Battery" option in the "Settings". If your phone battery is less than 20%, the system will automatically turn off the wireless reverse charging function in order to ensure the normal operation of the phone and charging experience. Please charge your phone to more than 20% with the charger first, and then try using reverse charging.
Go to Set Battery and check whether the Wireless Reverse charging switch is on.The battery of the phone itself is less than 20%, please use the charger to charge the phone first, and then wireless reverse charging after the battery is higher than 20%. When the battery of the phone itself is less than 20%, the phone will automatically turn off the external wireless reverse charging to ensure the normal work of the phone itself and a good charging experience.
If you use the USB port of a computer or cable board for power supply, a third party, and an adapter or wireless charging base that has not passed the standard certification and does not meet the safety specifications may cause the watch to fail to charge properly and even damage the watch. Therefore, you are advised to use a Huawei charger or comply with the applicable country/region laws and regulationsIf the phone is equipped with a third-party plug-in such as charging doctor, it is recommended to test after uninstallation.
2. You can solve the problem in the following ways: Check whether the charging port is abnormal: Check whether the charging port is blocked by foreign matter, mildew, corrosion, or internal cable damage. If such problems occur, you are advised to go to the nearby Huawei customer service center for cleaning and testing. Recommended charging with standard charger: It is recommended that you use the standard charger and charging cable for charging.
3, may be the socket contact caused by unstable charging. Solution: Try replacingAn outlet for charging your phone. The charger head or data cable is faulty. Solution: Replace with a new charger. Too much dust inside the phone leads to poor contact when the phone is charging. You can follow these steps to try: Shutdown charging test. Replace the charging position and eliminate the intermittent failure caused by poor socket contact. If conditions permit, replace the standby charger for testing.
Because some mobile phone protective cases are too thick, or the material of mobile phone protective cases may affect the mobile phoneThe recognition function of the wireless charger, it is recommended that you take off the mobile phone protective case and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
The wireless charging function of Huawei mobile phone can be enabled by turning on the wireless reverse charging switch under the battery. Tools/materials: Huawei Mate20Pro, Android setup software. Start by tapping the "Settings" option on your phone's desktop. Then in the Settings page that opens, clickClick the Battery option. Finally, in the battery page, open the "wireless reverse charging switch".
Check compatibility: Ensure that your Huawei mobile phone supports wireless charging. Only Huawei mobile phones with the wireless charging function can be charged wirelessly. Adjust Settings: Go to your phone's Settings menu and look for wireless charging or similar options in System and Update or battery options. The exact menu name and location may vary depending on the Huawei phone model, but a switch is usually provided to enable or disable the wireless charging feature.
Router password encryption is incompatible: Check whether the wireless router password encryption is compatible with Huawei mobile phones. If not, please change the router password and try to change the WIFI encryption method of the router. Mobile phone system fault: Check whether the mobile phone system is faulty. If the system is faulty, reset the static IP address of the mobile phone to resolve the problem.
First, check the WiFi Settings. Make sure you are connected to the correct WiFi network and that the signal strength is good. Sometimes, Huawei handsThe phone may automatically turn off WiFi to save power because the signal is too weak. In addition, you can also try to forget the current network and reconnect to rule out the possibility of network configuration errors. Second, turn off the power saving mode or set it to smart mode. Huawei phones may automatically turn off WiFi in power-saving mode to extend battery life.
Take the Huawei Honor 20Pro mobile phone of EMUI0.162 system as an example, the reason for the repeated disconnection of the wifi of Huawei mobile phone is that Huawei mobile phone has a mode that will automatically disconnect data in the long standby state in order to consider battery life and save traffic.You can choose the corresponding mode according to your needs.
After connecting to the WLAN, keep it within the valid distance of the WLAN hotspot (less than 10 m) to avoid automatic disconnection due to weak network signals. Turn on Set Wireless and Network WLAN configuration Keep the WLAN connection always in the sleep state, and the phone will always be connected to the WLAN network. If you used a metal case, remove the case and try again.
If you use a Huawei mobile phone, the connection to the WLAN may not be timedIf the connection is disconnected and reconnected, perform the following operations: Check whether your WLAN signal is good After restarting your mobile phone, pull down the notification bar, and hold down the WLAN icon. If the signal is weak, it is normal for the phone to disconnect and reconnect, and it is recommended that you move to a place with a better signal.
1, mate60 wireless charging intermittent may be caused by the following reasonsThe quality of the charger or charging base is not good, it is recommended to replace a high-quality charger or charging base. The distance between the charging base and the mobile phone is too far, resulting in unstable wireless charging signals. You are advised to keep a proper distance between the mobile phone and the charging base.
2, the problem of intermittent wireless charging may be caused by the following aspects: charger problem: If you use a wireless charger, it may be the charger itself has a problem, such as the charger power cord loose, charger interface dirty, charger heat, etc., which may lead to wireless charging instability. Cell phone problem: If your cell phone is chargingProblems such as poor port contact and loose charging cables may lead to unstable wireless charging.
3, make sure that the mobile phone and wireless charger compatible: to make sure that your mobile phone supports wireless charging function, and the wireless charger is compatible with your mobile phone model. Different phone models may have different charging standards, so you must use a wireless charger that supports your phone model. Check the charger and power adapter: Make sure that the wireless charger is working properly and that the appropriate power adapter is connected, and that the power adapter is securely plugged into the power outlet.
4, try to replace other wireless charging base intoDetermine whether the fault is the fault of the mobile phone or the wireless charger. A non-Huawei wireless charger may be incompatible with the mobile phone, resulting in abnormal wireless charging function. You are advised to use a Huawei official wireless charger.
5, using the wireless charging function After enabling the wireless charging function, the user needs to place the Huawei Mate 60 Pro on the charger that supports the Qi wireless charging standard. Make sure there are no obstacles between the phone and the charger, and that the phone is properly placed in the charging area of the charger. If everything goes well, the phone will start charging, and the charging status will be displayed on the screen.
6. Find the "Battery" option in the Settings screen of the phone and click to enter. In the battery interface, see the "wireless charging" option, click it to turn on the switch. Place the charger that supports wireless charging in the designated area above the back cover of the phone to start wireless charging. During the charging process, the phone will display the charging status, and it will automatically stop charging after charging.
Huawei mate50 wireless charging is always broken. Mobile phone wireless charging can be disconnectedCan be caused by a variety of reasons, such as the phone temperature is too high. Poor contact between charging base, data cable, charger and power supply. The phone is not placed in the center of the charging base. There are other items between the phone and the charging dock.
The reasons are as follows: Check whether a wired charging device is also connected. Check the connection of the wireless charger, and whether the connection between the charger, data cable and wireless charger is normal.
mate60 wireless charging intermittent may be caused by the following reasons: the quality of the charger or charging base is poor, it is recommended to replace a high-quality charger or chargeThe electric base. The distance between the charging base and the mobile phone is too far, resulting in unstable wireless charging signals. You are advised to keep a proper distance between the mobile phone and the charging base.
During wireless charging, after confirming that the phone has been aligned with the charging pad, you need to confirm whether the phone is being charged. On the Mate50's status bar, you can see if a charging sign appears on the battery icon to ensure that the phone is receiving a charging signal. If you find that the charging speed of the phone is too slow for a long time, you can re-adjust the alignment of the charging plate and the phone to try.
Disadvantages Charging speed comparisonSlow. In the era of fast mobile phone charging, wireless charging is very slow. Now most of the wireless charging only support 5W charging, a little faster is only 5W. And wireless charging really can not meet our needs. The mobile phone can not move, as long as the wireless charger is charged, then the location of the mobile phone must be very regular, if it is accidentally touched, then it can not be charged at all.