1. HelloPlease charge the phone by placing the screen facing up in the center of the charger or the position recommended by the charger manufacturer.
2, after the wireless charger is powered, directly place the phone screen facing up in the center of the charger or the position suggested by the manufacturer to charge.
3, connect one end of the data cable to the charger, and then plug the charger into the power socket, and connect the other end to the wireless charger. The charging area of the mobile phone with wireless charging function can be aligned with the front center of the wireless charger.
4, Connect the prepared wireless charger to the power supply, so that it can supply power. Connect the power supplyThe following is the specific procedure to enable the wireless charging function of Huawei P40: Operation/Step 1 Set midpoint Wireless Reverse charging to open the Settings, tap Battery - Wireless Reverse charging. 2 Click OK, know Click OK - Know, put the phone on the wireless charging device to wireless charging.
Using Huawei mate30 as an example, you can open [Settings] on the desktop of your mobile phone to enable wireless charging. Under the Settings menu, find and click on [Battery]. Turn on the switch button on the right side of [Wireless reverse charging]. The Huawei Mate30Pro is a smartphone owned by HuaweiIt was released on September 19, 2019 in Munich, Germany.
To enable the wireless charging function of a Huawei mobile phone, perform the following steps: Locate the Settings icon on the desktop of the mobile phone and tap. Find the "Battery" option in the Settings and tap to enter. Find the "Wireless reverse charging" option in the battery Settings and turn on the switch on the right. Put the back of the two phones on each other, make sure there are no obstacles between the two phones, and wait for the phone to automatically connect and start charging.
1. Replace one. The main function of the non-slip strip is to support the non-slip and heat dissipation function of the mobile phone when charging. After the non-slip strip falls off, it will affect the heat dissipation and anti-slip of the mobile phone and wireless charger system. Do not move the silicone strip at will. If you find it out, you need to replace it immediately. Huawei wireless charger, vertical wireless charger, Max support 50 watts wireless fast charge. Built-in double coil, the induction range is larger, horizontal and vertical placement of the phone can be.
2. The silicone anti-slip strip on the wireless charger is replaced by rubber. The role of the silicone anti-slip strip and the rubber strip is the same, therefore, the silicone anti-slip strip on the wireless charger is replaced by rubber.Wireless charging technology is a special way of power supply, it does not need the power line, rely on electromagnetic wave propagation, and then the electromagnetic wave energy into electricity, and finally achieve wireless charging.
3, Huawei laptop non-slip strip rotten a bit to change. According to the relevant information of the survey, the role of the anti-slip strip is to support the anti-slip and heat dissipation function of the mobile phone when charging, the anti-slip strip will affect the heat dissipation and anti-slip of the mobile phone and wireless charger system, and must be replaced in time after damage, otherwise it will affect the use of the computer and the safety of the computer plug-in.
1, if you are wireless charging, because there will be energy loss in the wireless transmission process, and then produce a certain amount of heat, there will be a phenomenon of wireless charging heat, this is normal.
2. Does Huawei's wireless charging cause harm to the battery? Wireless charging may indeed cause some harm to the battery, which is similar to wired charging, and a long time of charging will have an impact on the life of the battery. However, due to its unique technical principle, wireless charging may generate more heat during the charging process. High-temperature environment pairBatteries are bad, so wireless charging could, in theory, damage the battery more than wired charging.
3, the use of wireless charger to charge, the mobile phone will be hot, this is a normal phenomenon, but need to avoid the use of wireless charger for a long time to charge, so as to avoid damage to the mobile phone. The Huawei P30 supports wireless charging, but requires an additional wireless charger.
4, the wireless charger needs to unplug the power plug, keep the charger connected for a long time, may cause the charger to heat up; The wireless charger cannot be used, possibly because the phone is not placed in the right placeYes, you generally need to put the phone in the middle of the charging tray.
1. Mobile phones that support wireless charging are: Huawei Mate 40E Pro, Huawei P50 Pro, Huawei Mate 40E, Huawei Mate 40 Pro, Huawei Mate 30 Pro, Huawei Mate 20 Pro, Huawei P40 Pro, etc.
2. The wireless charging function of Huawei mobile phone can be enabledThe wireless reverse charging switch under the battery turns on the wireless charging function of Huawei mobile phone. Tools/materials: Huawei Mate20Pro, Android setup software. Start by tapping the "Settings" option on your phone's desktop. Then in the Settings page that opens, click on the "Battery" option. Finally, in the battery page, open the "wireless reverse charging switch".
3. Huawei mobile phones have wireless charging function, but not all mobile phones support wireless charging, only some mobile phones support wireless charging, and the charging base of wireless charging needs to be purchased by oneself. If your phone doesn't have wireless charging,You can check the website to see if your phone supports wireless charging. Huawei mobile phone wireless charging function refers to the mobile phone using wireless electromagnetic waves to charge, without the use of wires.
Hello, please charge the phone with the screen facing up in the center position of the charger or the position recommended by the charger manufacturer.
Charge the wireless charger by directly placing the phone screen facing up in the center of the charger or in the position suggested by the manufacturer.
Huawei handWireless charger use steps: Connect the 9V2A charger to the socket and connect the data cable. Cable usb-c side connects to wireless charger. Place the charging area of the phone with wireless charging function in the center of the surface of the wireless charger. You can see that the phone has shown that it is charging. For information on charging areas, refer to the phone's instructions.
Connect the 9V2A charger to the power outlet and connect the data cable. The USB-C end of the data cable is connected to the wireless charger. Place the charging area of the phone with wireless charging function in the center of the upper surface of the wireless charger, and the phone will show that it is charging.
Use the data cable to connect the charging head and the charging base, and connect the charger (the charging head that comes with the phone or is purchased separately) to the power supply. Then, use the data cable to connect the charger and wireless charger. Next, we place the charging area of the phone in the center of the upper surface of the wireless charger. After the phone is placed on the charging base for a few seconds, there is a "drip" sound, indicating the start of charging. At the same time, it also said that Huawei wireless charger charging successfully.