1, Check the Settings: Make sure that your Mate 30 wireless charging function is turned on. You can look for the options in Battery Settings in the Settings menu and make sure wireless charging is turned on. Check the charger and power adapter: Make sure the wireless charger and power adapter you are using is compatible with the Mate 30. Sometimes, incompatible chargers may not work properly. It is recommended that you use original or certified chargers and adapters.
2, mate30 can not wireless charging reason: wireless charging base indicator light is not bright, please checkCheck whether the connection between the charging base, data cable, charger and power supply is in poor contact, and it is recommended that you re-plug it. Is there anything else between the phone and the wireless charging base? If so, please remove it. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected. If the phone is out of position, it will not be able to charge.
3, if your mobile phone cannot use wireless charging, please follow the following steps: Check whether the mobile phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check the charging base and data cableIf the connection between the charger and the power supply is not in good contact, reinsert it.
4, when you do not need wireless charging, just turn off the wireless charging option. The wireless charging function of Huawei mate30 is very practical, which can make you use your mobile phone more convenient.
5, suddenly found that mate30 using Huawei 27W super wireless charger can not be charged! The charging head used for self-testing includes the 40W charging head provided by mate30, the 18W charging head provided by Mate9, and the ordinary 10W charging head.
6,Take the emui10 system for example. Open your phone's Settings, tap on the Battery option, then find and tap on the Wireless Reverse Charging option. After that, you only need to place the device to be charged in the middle of the back of the phone. How to use Huawei mate30 wireless charging for emui10 system as an example. Unlock your phone's screen and open the Settings app on your desktop. In the Settings screen, find the battery option and click on it.
Please cross-verify that the replacement has wirelessCharging function of the device, cross check whether the wireless charger fault, such as the wireless charger is normal, the mobile phone is still unable to charge, there may be a mobile phone fault. You are advised to back up your data in advance (wechat /QQ applications need to be backed up separately) and take your mobile phone, original charger, original data cable, and purchase voucher to a nearby Huawei customer service center for testing.
Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normallySituation. Connect your phone directly to the wired charger to see if it can be charged.
Restart your phone or try to charge your phone. Check whether the wireless charging function of the charged device is normal. Disable the wireless backcharging function of the charged device. When a phone with reverse charging detects that an OTG device supporting data exchange between devices is inserted, the phone outputs voltage to the VBUS on the USB data cable and prompts for reverse charging. When connecting other devices, switch to the mobile power supply to discharge and charge other electronic devices.
If you use a Huawei mobile phone, wireless charging cannot be usedPlease check whether a wired charging device is connected at the same time. If wired charging and wireless charging are used at the same time, wired charging will be preferred.
Poor contact. Check whether the charging interface at the bottom of the phone is in good contact with the data cable, if the contact is not good, it will not be able to charge. Replace the power cable or data cable. Sometimes the problem is in the power cord or data cable, you can try to replace the power cord or data cable respectively to eliminate the cause of the fault. The temperature is too low. Extreme low temperature environment will affect the normal use of wireless charging function.
Check whether the phone charger is original and damaged. If it is not original or the charger is damaged, you can replace the phone charger. Press the battery holder contact and the charger interface to check whether the interface is in poor contact. If the phone is restarted indefinitely due to poor contact, the charger can be repaired. Check whether the phone is rebooted indefinitely due to system reasons. You can try charging again by backing up the data in your phone and restoring factory Settings.
Replace adapter: if sentThe heat is serious, it is recommended to buy a regular manufacturer adapter to use with the bracket. If there is still heat under constant temperature, it is necessary to power off and cool down first, and then restart. Charging cable selection: Replace other charging cables to test wireless charging and confirm whether the problem is caused by the charging cable. Optimize the charging environment: Keep the wireless charger working area clean, flat and free of interference, while temporarily removing the phone case or choosing a thin case.
First, after starting the car with the car key, the wireless charger will automatically start. This convenient feature can be achieved with a light step on the accelerator. Next, place your phone on the in-car wireless chargerEnsure that the safety helmet (which may refer to the phone case or bracket) is tightly covered on the phone screen to ensure effective contact. Then, connect the USB cable to the outlet of the charger and the input port of the phone to form a charging path.
Start the wireless charger in the car: usually find the accelerator of the car first, and then use the car key to ignition the car, and then the wireless charger will automatically open. Put the helmet on the phone: Place the phone on the wireless charger in the car, and then put the helmet on the phone, taking care to ensure that there is a dense contact between the helmet and the phone.
Car wireless chargingThe method of charging the mobile phone is as follows: The use of the car wireless charger is relatively simple, first of all, the car wireless charger is fixed to the appropriate position in the cab, and the position of the driver can not affect the normal driving; Secondly, connect one end of the data line of the car wireless charger to the car cigarette port power supply, and connect the other end to the wireless charger.
Apple mobile phone every wireless charging has to restart, which is the design of the mobile phone system, so there is wireless charging to be heavyYes.
** Get a wireless charger ** : First, make sure you have a charger that supports wireless charging, such as the Qi standard charger or Apple's MagSafe magnetic charger. ** Connect Charger ** : Plug the wireless charger into a power outlet and make sure it is working properly. For the MagSafe charger, it automatically snaps and aligns with the iPhone 15.
A broken Apple 14 wireless charging cable will cause an automatic restart. According to the relevant data, whether through the cable or through the lightning interface MagSafe wireless charging, the phone will