1, notify the insurance company for trailer rescue: if you have commercial insurance, most insurance companiesA free trailer rescue service is provided once or twice a year. Therefore, if you encounter no power on the road, you can call the customer service phone of the insurance company and ask them to send a trailer to come to the rescue. In addition, it is best to plan the route before the pure tram on the high speed to avoid the occurrence of no electricity in the middle.
2, electric vehicles on the highway out of power, you can take the following measures: Look for charging piles: although the highway is basically equipped with charging piles, but the number is limited and often malfunction. Therefore, before traveling, be sure to find out whether the high-speed service area of the way has charging piles, and plan when to carry outCharge up. Contact the trailer: If the power runs out and breaks down halfway, you can only call the trailer to tow the vehicle to the nearest charging pile.
3, adjust the driving mode in time, and control the throttle at a minimum to reduce power consumption. Turn off air conditioning and other power-consuming functions, such as listening to music, water heater, etc. Move the vehicle to the side of the road as much as possible, place a tripod to prevent the vehicle from sliding, and if the situation permits, you can order a limo model and escort the car to a service station for repair.
4, if possible, find a ride-along service, such as contacting a friendly vehicle to take your tram to the nearest service area. exigencyFor help, in special cases, call the high-speed patrol Vehicle assistance hotline, they usually have a reception station in the service area, will provide assistance to move the vehicle safely to the maintenance area. Remember, prevention is always the best policy.
5, after the trailer arrives, you can directly drag the car to the nearest charging pile for charging, but if the vehicle is completely without electricity, it may also need to trouble the trailer master to catch the electricity, otherwise the full probability of the tram is not charged.
Slow charging (conventional charging, on-board charging) is suitable for on-board chargers and family wall-mounted charging piles, whose current and power are relatively small, and the general charging time takes 6-8 hours. Fast charging (ground charging, emergency charging) includes two forms of charging station and mobile trolley, mainly through the non-on-board charger using high current to directly charge the battery, so that the battery can be charged to about 80% of the electricity in a short time, generally 1 hour can be fully charged.
Charging mode of electric vehicles Modern pure electric vehicles are generally equipped with two modes of fast charging and slow charging to adapt to various usesHousehold demand. However, although plug-in hybrid models are also equipped with charging interfaces, their fast charging function is often ignored, which has caused consumer concern. Battery capacity and fast charge requirements First of all, the battery capacity of plug-in hybrid models is usually small, which determines that their need for fast charge function is not urgent.
BMW hybrid new energy vehicle charging time takes more than 3 hours. It comes with a fast charge: a portable charging gun. Just connect to the household 220V 16A three-eye socket to charge the electric car, but the charging speed is slow. Portable charging gun can be purchased in the online mall, but need to choose the quality of the knowReason, because the charging gun still has a strong current through, forcibly unplugging will have the risk of electric shock. Here's how to unplug your charging gun: Turn it off. Some charging guns will be unplugged by scanning the bar code to power off, after power off, please wait a moment and then unplug the charging gun from the car jack.
Pulling out the charging gun during charging will not cause damage to the vehicle. However, doing so will cause a charge interruption, after which the gun will need to be reinserted to continue charging. The charging methods of new energy vehicles include: - Slow charging: suitable for car chargers and family wall-mounted charging piles. This chargeThe electric mode has less current and power and usually takes 6 to 8 hours to fully charge.
In the process of charging new energy vehicles, if you need to unplug the charging gun halfway, it will not cause problems to the vehicle. However, it should be noted that after unplugging the charging gun, it can not continue to charge, and it is necessary to re-swipe the card or plug the gun to charge. The charging methods of new energy vehicles are mainly divided into three types: slow charging, fast charging and wireless charging.
The new energy vehicle can be unplugged in the middle of charging, but it needs to pay attention to the correct way in operation. First, the charging gun needs to be turned off. Some charging guns are unplugged by swiping a card, scanning a bar code, entering a PIN numberPower supply and other ways to power off, after power off, please wait for a moment and then pull the charging gun out of the car jack. In addition, before charging, it is necessary to confirm whether the state of the car is good and whether the charging equipment is normal.
In the charging process of new energy vehicles, users can unplug the charging gun. However, it is important to note that this operation must be done carefully to avoid possible safety hazards. First, before unplugging the charging gun, you need to turn off the charging device. Depending on the specific charging device, the shutdown method may be different, and it may be necessary to swipe the card, scan the bar code, enter the password, or unplug the power directlyProceed.
When using new energy vehicles, unplugging the charging gun midway will not affect the vehicle, but it can not continue to charge later, and it is necessary to re-operate the card and insert the gun. There are three main ways to charge new energy vehicles: slow charge: suitable for car chargers and family wall-mounted charging piles, its current and power is small, charging time is usually about 6-8 hours, suitable for daily use of energy.
For the charging problem of trams running long distances, the following are some feasible solutions:Wireless charging: This charging method is also known as inductive charging, and the biggest feature is safety. Even in bad weather conditions, there is no need to worry about the danger of electric shock. Therefore, it is a very practical way to charge. On-board charging box: When the vehicle needs to be charged during a long drive, the on-board charging box can be used for emergency charging.
First of all, we can solve this problem by wireless charging. Wireless charging, also known as inductive charging, is the biggest feature of safety, even in rain and snow weather do not have to worry about the risk of electric shock. This charging method is very convenient, only need to stop the trolley at the designated placeIt can be charged. Secondly, we can use the on-board charging box for emergency charging.
If you plan to drive a BYD tram long distance, it is recommended to find a charging station to fully charge the vehicle if possible. If you can't charge, you can choose the BYD Tang Hybrid version, which has a HEV mode and can be refueled at gas stations. Byd Tang is a new dual-mode hybrid SUV with a three-engine dual-mode powertrain. It has a 0TI turbocharged engine and two motors at the front and rear to achieve independent power output from the front and rear wheels.