Align the magnetic part of the magnetic charging bank with the magnetic interface of the device. Gently approach and fit the device to ensure a tight magnetic connection. When charging, the device will automatically start charging without any additional action. Align the magnetic part: When using the magnetic charging bank, first observe whether the magnetic part of the charging bank is aligned with the magnetic interface of the device. Make sure the orientation is correct for connection.
When the magnetic charging bank is out of power, you can follow the following steps to charge: First, find the magnetic charging bankInterface, usually located on the inside or bottom of the treasure box. Then, use a charging cable (with a USB port at one end) to connect the magnetic charger to a power outlet, computer or other power supply device. After making sure that the connection is secure, the power will start to charge the magnetic bank. Wait for the charging indicator to light up, indicating that the charging treasure is being charged.
The charging method of the magnetic charging treasure is similar to that of the ordinary charging treasure, which is mainly charged by connecting the power supply through the USB interface. When charging a magnetic charging treasure, you first need to find its charging interface, which is usually located on the inside or bottom of the box of the charging treasure. Next, use a charger with a USB port on one endWire to connect the magnetic charger to a power outlet, computer or other power supply device.
Magnetic charging method: Pull the magnetic charging bank to the back of the phone, and the charging animation will appear on the main screen of the phone and display the power ring. Magnetic charging cable, also known as magnetic charging cable, magnetic charging cable, magnetic charging cable, magnetic charging cable, magnetic data cable, etc., is a convenient way to charge. It uses the magnetic principle to achieve automatic adsorption near to solve the problem of manual alignment for traditional wireless charging.
To charge a magnetic charger, perform the following steps: Insert the magnetic end of the cable into the magnetic connector of the chargerMake sure the connection is tight. Point the magnetic part of the power bank at the magnetic area on your phone or other device. Make sure the magnetic connection between the bank and the device is strong and stable for charging. Please note that some devices may need to be aligned with the magnetic interface to be charged.
The methods of using the Apple magnetic charging bank are as follows: Charging cable connection: Connect one end of the charging cable to the charging port of the charging bank, and connect the other end to a mobile phone or other device. Magnetic connection: Align the magnetic interface of the charging bank with the magnetic interface of the device, and gently press it to connect. Charging completion: When the charging bank is connected to the deviceHuh? How do you charge it?
Mobile phone wireless charging refers to the meaning that the charger and the electrical device can be connected to the phone without wires.
Wireless charging, also known as inductive charging, non-contact inductive charging, from wireless power transmission technology, is the use of near-field induction, that is, inductive coupling, by the power supply device (charger) to transmit energy to the power device, the device uses the received energy to charge the battery, and at the same time for its own operation.
Wireless charging, also known as inductive charging or non-contact inductive charging, is based on the principle of electromagnetic induction and does not need to be like traditionalThe wired charger requires a transmission cable to transmit electricity to the device, but the device that needs to be charged can be charged by contacting the wireless charging base. More use doubts can enter vivo official website -- my -- online customer service -- input labor, consult online customer service feedback.Wireless charging, also known as inductive charging, non-contact inductive charging, is the use of near-field induction, that is, inductive coupling, by the power supply device (charger) to transmit energy to the device that uses electricity. If the distance between the charger and the electrical device is far, it is necessary to use resonant inductive coupling design.
2, ensure that the magnetic charging bank is sufficient. In first use orIf it is not used for a long time, it is necessary to fully charge the magnetic charging bank. Plug the cable of the magnetic charging bank into the USB port of the power adapter. Original cables or compatible cables can be used. The magnetic end of the magnetic charging bank is attached to the USB port of the cable, and the other end is attached to the charging port of the mobile phone or other devices.
3. The method of using Apple magnetic charging is as follows: Prepare tools. You'll need an iPhone that supports MagSafe charging (like the iPhone12 or later), a MagSafe charger, and a power adapter. Turn on the charge. Attach the MagSafe charger to the center of the back of the iPhone. In addition, the MagSafe dual charger allows you to charge your iPhone, AirPods, and AppleWatch at the same time.
1, magnetic charging is through the magnet male and female suction so that the charging cable and the jack can be connected to charge. In essence, it is still wired charging, but from plug-in to adsorption. This is very different from wireless charging, magnetic charging can not notCharge with a wire. Wireless charging is a technology that does exist, and the technology has been widely used in electronic devices.
2, magnetic charging refers to the charging method through the magnet male and female suction to achieve the charging effect. In essence, it is still wired charging, but from plug-in to adsorption. This is very different from wireless charging, magnetic charging can not be charged without a line. Magnetic charging transmission speed is fast, perfectly compatible with mobile phone data transmission.
3, magnetic charging is a new type of charging, it by adding a magnet at the charging interface, so that the charger and the mobile phone between the magnetic force, fromAnd realize fast charging. The following is how to use magnetic charging: Plug the magnetic charger into a power outlet and turn on the power switch. Place the phone on the charger and make it fit tightly to the charger. Wait a few seconds until your phone starts charging.
4, magnetic charging is through the magnet male and female suction, so that the charging cable and the jack can be connected to charge. In essence, it is still wired charging, but from plug-in to adsorption. This is very different from wireless charging, magnetic charging can not be charged without a line. Wireless charging is a technology that does exist, and the technology has been widely used in electronic devices.
5, magnetic charging technology is mainly the use of magnet male and female to absorb to achieve the effect of charging. The design of this magnetic charger is very convenient, just align the back of the phone with the charger, and the magnetic force between the two will make them automatically adsorb together. In this way, the user does not need to accurately align or arduously insert the cable, just put the phone gently close to the charger, and it will automatically adsorb and start charging.
6, the magnetic charger charging method is as follows, first of all, the principle of use is very simple, magnetic charging is through the magnet male and female suction, so that the charging line and the jack can be connected to charge. Magnetic charge, as long as the connectors each otherClose in, the magnetic force pulls firmly and charges. In essence, it is still wired charging, but from plug-in to adsorption. This is very different from wireless charging, magnetic charging can not be charged without a line.
1. Plug the magnetic charger into the power socket and turn on the power switch. Place the phone on the charger and make it fit tightly to the charger. Wait a few seconds until your phone starts charging. When charging is complete, turn off the power switch of the charger. It should be noted that the magnetic charger onlyIt can be used for specific models of mobile phones, and different brands of mobile phones may require different chargers.
2, magnetic charging is through the magnet male and female suction so that the charging cable and the jack can be connected to charge. In essence, it is still wired charging, but from plug-in to adsorption. This is very different from wireless charging, magnetic charging can not be charged without a line. Wireless charging is a technology that does exist, and the technology has been widely used in electronic devices.
3, how to charge magnetic charger? The magnetic charger charging method is as follows, first of all, the principle of use is very simple, magnetic charging is through the magnetThe female pair suction enables the charging cable to be connected to the socket for charging. Magnetic charging, as long as the joints are close to each other, the magnetic force will be firmly attracted for charging. In essence, it is still wired charging, but from plug-in to adsorption. This is very different from wireless charging, magnetic charging can not be charged without a line.