1, the charger itself has problems: the power cord of the charger is loose, the charging seat is damaged, the charging light is not up, etc., which will cause the charger to not work normally. Should check the charger itself has no problem, the problem is more serious, need to contact the after-sales service for repair or replacement.
2, the distance between the charger and the phone is too far. Xiaomi wireless charger needs to fit with the phone to charge normally, if the distance is too far, the light will always flash. The charger port is loose. The interface of the Xiaomi wireless charger must be properly plugged into the power outlet ifIf the connector is loose, the light will keep blinking. There is a problem with the charger.
3, you want to ask is millet wireless charger flashing green light does not charge what reason? The phone is not in the center of the wireless charger. The phone case is too thick, which causes the wireless charging to be blocked. The wireless charger is in poor contact, resulting in the failure to perform normal wireless charging operations.
4, possible problems or anomalies: However, the green light flashing may also indicate that some problems or anomalies have been encountered during the charging process. For example, if the connection between the charger and the device is poor, or there is a charging problem with the device itself, the green light may flashTo prompt the user. In addition, if the power supply of the charger is unstable or there are other faults, it may also cause the green light to blink.
5, place the phone on the wireless charger, ensure that the contact between the phone and the wireless charger is good. At this time, the phone screen will display "charging" prompt, indicating that wireless charging has been enabled. It should be noted that the power supply of the wireless charger needs to be plugged into the power socket, otherwise it cannot be charged. At the same time, the distance between the wireless charger and the mobile phone can not be too far, and it is generally recommended that the distance does not exceed 5mm. The above is the opening method of millet wireless charging.
1, when the temperature is too high, the charging power will automatically decrease. All versions of Mi 11 charging temperature control is particularly strict, the temperature reached 36 degrees began to slow down 40%, normal to 9000ma, mobile phone temperature above 36 degrees is only about 5000 ma. The Mi 11Pro battery is equipped with a large battery capacity of 5000mAh, which supports 67W fast charging, 67W wireless charging, and 10W reverse charging.
2, must use the mobile phone original wireless charging can be faster. The charging effect of the mobile phone depends on the charger, but also the charging cableAnd the phone. In terms of chargers, the general charger will have a built-in smart chip, which can identify the current and voltage required to charge the phone, and then adjust the current and voltage within the safe range of the phone.
3, mobile phone Settings "Click power saving and battery Settings". On the Power saving and battery Settings screen, tap Fast Acceleration. Quick acceleration Click the dot behind the "Default use fast charge acceleration", and the dot turns blue, indicating that the Xiaomi phone has successfully restored the fast charge function. Xiaomi's fast charging technology is called Super Charge TurboThe highest wired charging power supported is 120W of the Mi 12 Pro.
1, can be out of power, the protection state is blinking. When the millet wireless charger, millet wireless charger (universal fast charging version) LED light status is green flashing, millet wireless charger is in the error and protection stage. At this time, you should pay attention to whether there is a metal object placed on the wireless charger, please remove it and charge it again. Just give it a second. This is a mismatchSet, detect metal foreign body, automatic protection setting.
2, the distance between the charger and the phone is too far. Xiaomi wireless charger needs to fit with the phone to charge normally, if the distance is too far, the light will always flash. The charger port is loose. The interface of the wireless charger must be correctly inserted into the power socket, and if the interface is loose, the light will always flash. There is a problem with the charger.
3, millet mobile phone for no reason to charge the reason may be: the battery has entered a dormant state, the charger is damaged, the phone is damaged, etc. This is mostly because the user runs out of battery and the phone automatically turns offIt was caused by the machine. The solution to this situation is: remove the battery, wait 5 minutes, then reinstall the battery, and then connect the charger to charge, 30 minutes later, and then restart. Whether the phone uses a regular original Xiaomi charger.
First, adjust the position of the phone on the wireless charger and change the wireless charging. Second, upgrade the system and restart the phone before using the wireless charger.
Please put the mobile phone in a cool and ventilated placeTry wireless charging after the phone has cooled down. Battery damage: If the phone's battery has aged and damaged, it may not be able to charge wirelessly. You can go to a professional repair center to replace the battery and try wireless charging again. The Mi 3 mobile phone supports the Qi wireless charging standard, and can be charged wirelessly using a wireless charger that meets the standard.
may be the mobile phone placed in the wrong position, you can adjust the position of the mobile phone on the wireless charger; There may be a problem with the system of the phone, you can upgrade the system or restart the phone to use the wireless charger; It is also possible that the wireless charging coil of the phone is damagedNeed to go to after-sales maintenance.
If the interface is loose, the light will keep blinking. There is a problem with the charger. If the above two cases are not a problem, then there may be a problem with the charger itself and it needs to be replaced or repaired. If you encounter the situation that the millet wireless charger light has been flashing, you can first try to adjust the distance between the charger and the phone, or check whether the interface is loose. If the problem still exists, it is recommended to contact Xiaomi customer service or go to a professional electronic repair shop for repair.
At this time should pay attention to whether there is a metal object placed on the wireless charger, please take it off and charge it again. milletMIX3 standard equipped with: mobile phone host * minimalist mobile phone protective case * Power adapter * Millet wireless charger *USB Type-C data cable *Type-C TO AUDIO conversion cable * Pin * three-pack certificate * Getting Started Guide *1.