1, BYD Song wireless charging function is very convenient and practical. You mayFind a wireless charging switch in the Settings of the car PAD, and turn it on to start using it. Mobile phone wireless charging area is located in the center console, when the vehicle starts, just place the QI certified mobile phone on the non-slip rubber mat, the screen is facing up, the mobile phone will automatically enter the wireless charging state, while the multimedia UI interface charging icon will also be displayed.
2, as long as your wireless charging function is open, put the phone on the wireless charging board can be charged, open wireless charging you just say small Di, open wireless charging can be.
3, BYD Song wireless charging in the car pad, inIn the Settings, there is an on and off switch for wireless charging, which can be turned on. Mobile phone wireless charging position, mobile phone wireless charging area is located in the center console, when the vehicle starts, the mobile phone is placed on the non-slip rubber mat in the wireless charging area, the mobile phone screen faces up, the mobile phone automatically enters the wireless charging, and accompanied by the multimedia UI charging icon display.
1. Install the horizontal support on the ground and fix the base and horizontal support with bolts to prevent swing. Connect the cable connection box to the cable connectionThe pile is installed and fixed with bolts to make the connection between the power cord and the pile firm and effective. Install the pile panel on the cable connection box and fix the pile panel with screws to prevent loosening.
2, first of all, you need to get the consent of the property, let them issue a certificate allowing construction and stamp the official seal. Next, you need to go to the power supply office to apply for installation. Please bring the certificate issued by the property, ID card, property ownership certificate and parking space ownership certificate to the power supply Bureau to apply for the installation of charging piles. After approval from the power supply board, they will send personnel to install the meters.
3, BYD charging pile installation process is mainly divided into four steps. The firstStep: Confirm charging conditions. First of all, after signing the agreement with the manufacturer or 4S shop to purchase the car, the car charging conditions confirmation procedures, the agreement to purchase the car, the applicant's identity certificate, the fixed parking space property rights or use rights certificate, the application for the installation of electric vehicle charging equipment in the parking space (property seal agreement), the parking space (library) plan. Step 2: Power supply scheme application.
4, BYD Tang charging pile application installation process If you have your own fixed parking space, you first need to go to the local power bureau, obtain an application for a new meter process and the construction of the property and industry committee to sign the sameA letter of intent. After these documents are returned to the Power Board, the approval time will take about 5 working days. Once the installation conditions are met, the staff will quickly install.
5, BYD installation of charging pile steps are as follows: the first step, obtain property permission. Before starting the installation, it is necessary to obtain the permission of the property and ask them to issue a construction permit with the official seal. The second step is to submit an application to the power supply Bureau. Prepare the property certificate, ID card, property certificate and parking space property certificate and other relevant materials, and go to the power supply Bureau to apply for the installation of charging piles.
6, to apply for the installation of BYD charging pile, you needFollow the following steps: Prepare the parking certificate, the property agrees to install the charging pile certificate, the car purchase contract, and the ID card, and then go to the business hall of the power company where you live to apply for the charging pile installation. Note that you need to prepare these materials in advance. When you arrive at the business hall, fill out the application form at the counter and submit the above materials to the staff.
1, how to use the wireless charging with the car (how to use the wireless charging with the car) How to use the wireless charging with the car:The car wireless charger is fixed to a suitable position in the cab, and the data cable connector of the wireless charger is connected to the cigarette lighter interface of the car; The other end is connected to the wireless charger, and after fixing the wireless charger, ensure that the wireless charger will not slip off and can be used normally.
2, first prepare a car wireless charger equipment. Secondly, the car wireless charge is fixed in the appropriate position in the cab. Then connect one end of the USB data cable of the wireless charger to the car cigarette port and the other end to the wireless charger. Finally, fix the position of the wireless charger, make sure that it is stable and will not slide, and put the phone on the chargeElectricity.
3. Follow the following steps to install Lamdo car wireless charger: First install the CarLife app on the mobile phone, enable cellular mobile data in the mobile phone Settings, then turn on the mobile phone WiFi to open the personal hotspot, and turn on the car WiFi. Connect the hotspot established by the mobile phone on the WiFi of the car, then click CarLife on the screen of the car, and open the CarLife on the mobile phone, then the car and the mobile phone can be connected.
BYDThe main components of the charging pile are the cable connection pile horizontal support cable connection box pile panel and safety maintenance position: Install the cable connection pile on the base, and bolt the base and cable connection pile to ensure that they are tight to prevent loosening. Install the horizontal support on the ground and secure the base and horizontal support with bolts to prevent swinging.
BYD charging pile installation process is mainly divided into four steps. Step 1: Confirm charging conditions. First of all, after signing a car purchase intention agreement with the manufacturer or 4S shop, the car purchase charging conditions confirmation procedures, the car purchase intention agreement, the applicant's identity certificate, the fixed parking space property rights or use rights certificate, aboutApplication for installation of electric vehicle charging equipment in parking space (property seal consent), parking space (storage) plan. Step 2: Power supply scheme application.
If you want to install charging stations in BYD, you need to complete the following steps: First, you need to get the consent of the property, ask them to issue a certificate allowing construction and stamp the official seal. Next, you need to go to the power supply office to apply for installation. Please bring the certificate issued by the property, ID card, property ownership certificate and parking space ownership certificate to the power supply Bureau to apply for the installation of charging piles. After approval from the power supply board, they will send personnel to install the meters.
BiyaByd charging pile installation process involves four key steps: charging conditions confirmation First, car buyers need to sign a car intent agreement, and submit relevant materials: car intent agreement, identification, parking space property rights or use rights proof, installation application (need property stamp agreement), parking space plan or site environment photos.
BYD Tang Charging pile application installation process If you have your own fixed parking space, you first need to go to the local power bureau, obtain a process sheet for applying for a new meter and the construction consent that needs to be signed by the Property and Industry Committee. After submitting these documents to the Electricity Board,The approval time takes about 5 working days. Once the installation conditions are met, the staff will quickly install.
The steps for BYD to install charging piles are as follows: The first step is to obtain property permission. Before starting the installation, it is necessary to obtain the permission of the property and ask them to issue a construction permit with the official seal. The second step is to submit an application to the power supply Bureau. Prepare the property certificate, ID card, property certificate and parking space property certificate and other relevant materials, and go to the power supply Bureau to apply for the installation of charging piles.
First of all, you need to get the consent of the property, ask them to issue a certificate of permission for construction and stamp the official seal. Next, you need to go to the power supply office to apply for installation. Please bring the certificate issued by the property, ID card, property ownership certificate and parking space ownership certificate to the power supply Bureau to apply for the installation of charging piles. After approval from the power supply board, they will send personnel to install the meters.
Installation of BYD charging pile involves four key steps: charging conditions confirmation First, car buyers need to sign a car intent agreement, and submit relevant materials: car intent agreement, identification, parking space property rights or use rights certificate, installation application (Property stamp approval is required), parking space plan or site environment photos.
The installation of BYD charging pile mainly includes four processes: confirmation of charging conditions, application for power supply scheme, installation construction and acceptance application. First of all, after signing an agreement with BYD auto manufacturers or 4S shops to buy cars, you need to go through the procedures to confirm the charging conditions of the car.
The steps for BYD to install charging piles are as follows: The first step is to obtain property permission. Before starting the installation, it is necessary to obtain the permission of the property and ask them to issue a construction permit with the official seal. The second step is to submit an application to the power supply Bureau. Prepare the property certificateId card, property certificate and parking space property certificate and other related materials, go to the power supply Bureau to apply for the installation of charging piles.
1. Byd E2 charger is designed on the right rear side. It can be opened manually through the upturned edge of the cover plate, and a sealed cover is also designed above the charging socket to improve the dustproof and waterproof ability.
2, you only need to place the mobile phone on the non-slip rubber mat in the wireless charging area in front of the center console, and the mobile phone screen faces up to start charging. There is noThe line charging area is located in the center console. When the vehicle starts, the mobile phone will automatically enter the wireless charging state. During the charging process, the green pattern inside the mobile phone will flicker dynamically, and the icon will flicker when the charging fault occurs. It should be noted that the mobile phone wireless charging function is only applicable to phones that have passed QI certification.
3, wireless charging, in front of the center console, there is a place to put things, the mobile phone can be charged, do not need to open. Mobile phone wireless charging position, mobile phone wireless charging area is located in the center console, when the vehicle starts, the mobile phone is placed on the non-slip rubber mat in the wireless charging area, the mobile phone screen faces up, the mobile phone automatically enters