1, because some mobile phone protective cover is too thick, or the material of the mobile phone protective cover may affect the recognition function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protective cover and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
2, the charging position is not correct check whether the phone is positiveThe center of the wireless charging board, if not, may lead to failure to charge. If there are obstacles between the charging pad and the phone, such as keys, coins, etc., it will affect the charging effect and they need to be removed. The phone case is too thick thick protective case may affect the charging effect, try to take down the phone case and then charge.
3, check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Confirm chargeProblem: The power cord of the charger is loose, the charging seat is damaged, the charging light is not up, etc., which will cause the charger to not work normally. Should check the charger itself has no problem, the problem is more serious, need to contact the after-sales service for repair or replacement.
You want to ask is millet wireless charger flashing green do not charge what reason? The phone is not in the center of the wireless charger. The phone case is too thick, which causes the wireless charging to be blocked. The wireless charger is in poor contact, resulting in the failure to perform normal wireless charging operations.
Second, check whether the device itself has charging problems, you can try to makeCharge with a wired charger to eliminate problems with wireless chargers. Finally, if the above methods are ineffective, you may need to consider replacing the charger or contacting Xiaomi customer service for further support and solutions. To better understand the problem, we can consider a practical example.
The charger itself has problems: the power cord of the charger is loose, the charging seat is damaged, the charging light is not up, etc., which will cause the charger to not work normally. Should check chargeThere is no problem with the electrical appliance itself, if the problem is more serious, it is necessary to contact the after-sales service for repair or replacement.
You want to ask is millet wireless magnetic charging treasure flashing red what is the reason? The power output is insufficient. According to the inquiry of the official website of Xiaomi wireless magnetic charging treasure, the flashing red light of Xiaomi wireless magnetic charging treasure is caused by insufficient power output, you can replace the high-quality power supply, replace the charging line or output device to determine the root cause of the problem, small failures also lead to the charging treasure can not work properly, internal failures and power chip failures, and seek help from Xiaomi customer service.
In this case, you can backup your ownImportant data and required data and then restore factory Settings, and then try, if not, it may be poor contact or the phone is not suitable.
The second is the problem of voltage or current, because some mobile phones are special, the voltage is different, so it can not be charged, the normal lithium battery is 7V voltage, such as Apple mobile phone is used 5V voltage, charging treasure if not do boost the case, the general lithium battery is unable to charge the Apple phone. There is also the interface problem, because the charging bank in order to adapt to a variety of mobile phone applications, so are configured with common mobile phone interfaces.
Is due to the phone case is too thick, the material is not suitable and other reasons, resulting in the charging bank can not work normally and power off. There are three solutions. Choose a thin shell or a transparent shell: Choosing a thin shell or a transparent shell will reduce interference with electromagnetic waves, thereby improving the efficiency of wireless charging. Remove the phone case and charge again: Remove the phone case and charge again to ensure the normal work of wireless charging.
The reason why millet 13ultra wireless charging can not be charged is that the device does not support wireless chargingThe charger is not compatible. Device does not support wireless charging: Please check whether your Mi 13ultra supports wireless charging. If it is not supported, you will not be able to use the feature even if you have purchased a wireless charger. Charger Not compatible: Please make sure that the wireless charger you purchase is compatible with your Mi 13ultra and complies with the Qi wireless charging standard.
The distance between the charger and the mobile phone is too far. Xiaomi wireless charger needs to fit with the phone to charge normally, if the distance is too far, the light will always flash. The charger port is loose. The interface of the Xiaomi wireless charger must be inserted correctlyPower socket, if the connector is loose, the light will keep blinking. There is a problem with the charger.
Restart the phone: When our phone has such a problem, we can force to hold down the power button, about 20s, the phone can automatically restart, at this time we take a look.
During the charging process, please place the center of the mobile phone slightly lower in the center of the wireless charger base to avoid shifting the mobile phone. If the position deviation is large, it will not be able to charge. Six,Please check whether wired charging devices are connected at the same time. If wired charging and wireless charging are used at the same time, wired charging will be preferred.
If your mobile phone cannot use wireless charging, please follow the following steps: Check whether the mobile phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger.
Replace the wireless charger: When our mobile phone appears in such a situation, it is likely that our charger hasProblem, at this time we can replace a wireless charger to try (original wireless charger or usb data cable) restore factory Settings: if the fault is still on after the boot, at this time we can restore the phone to factory Settings try.
The location of the charged device will affect the charging efficiency, and the farther the location is from the center, the lower the charging efficiency, even beyond the effective charging range of wireless charging. Please confirm whether the receiving device supports wireless charging function, whether it supports QI wireless charging protocol (it is recommended to consult the equipment manufacturer), if your device is not QI certification, there may be compatibility problems, it is recommended to takeCharge with the wireless charger that comes with the device.
1, Hello! The charger specifications of different models may be different, like the current output of the charger is not the same. The standard charging current of the charger can ensure better charging efficiency, such as the small charging current of the charger will extend the charging time or charge no electricity, if it exceeds the maximum, it may breakdown electronic componentsYes.
2, the distance between the charger and the phone is too far. Xiaomi wireless charger needs to fit with the phone to charge normally, if the distance is too far, the light will always flash. The charger port is loose. The interface of the wireless charger must be correctly inserted into the power socket, and if the interface is loose, the light will always flash. There is a problem with the charger.
3, millet mobile phone for no reason to charge the reason may be: the battery has entered a dormant state, the charger is damaged, the phone is damaged, etc. This is mostly because the user runs out of battery and the phone automatically shuts down. The solution to this situation is: Remove the battery, wait 5 minutes, then reinstall the battery, and then connect the charger to charge, 30 minutes later, and then restart. Whether the phone uses a regular original Xiaomi charger.
4, replace the line charge, see if you can charge, if you can rush in, it is the wireless charging is broken, if you do not charge it is the battery is broken. I hope I can help you.
5, make sure to use the official charging head. Second, look carefully at the wireless charging instructions, encounter a metal foreign body near, it will automatically cut off wireless charging, and continue to flash the green light, and return to normal after power off. You check oneWhether there is metal on the back of your phone or nearby metal interference, such as your "gold" (iron) ring. How to use: Buy millet wireless charger online, only host and a charging line, need to configure their own charging head.
6, may be out of power, the protection state is blinking. 20W millet wireless charger packaging or the past millet has always been simple white packaging, the front of the package in addition to the appearance of a wireless charge, there is no other introduction. There is almost no content in the package, only the name of the product on the side of the package: Millet wireless charger.