1, the charger itself has a problem: the power cord of the chargerLoose, charging seat damage, charging light not up, etc., this problem will lead to the charger can not work properly. Should check the charger itself has no problem, the problem is more serious, need to contact the after-sales service for repair or replacement.
2, you want to ask is millet wireless magnetic charging treasure flashing red what is the reason? The power output is insufficient. According to the inquiry of the official website of Xiaomi wireless magnetic charging treasure, the flashing red light of Xiaomi wireless magnetic charging treasure is caused by insufficient power output, you can replace the high-quality power supply, replace the charging line or output device to determine the root cause of the problem, and small failures also lead to the charging treasure can not work properlyIt's gonna keep flashing. There is a problem with the charger.
2, can be out of power, the protection state is blinking. When the millet wireless charger, millet wireless charger (universal fast charging version) LED light status is green flashing, millet wireless charger is in the error and protection stage. At this time, you should pay attention to whether there is a metal object placed on the wireless charger, please remove it and charge it again. The power will be off for a while, this is not placed in the right position, detected metal foreign objects, automatic protection Settings.
3, millet mobile phone for no reason to charge the reason may be: the battery has entered a dormant state, the charger is damaged, the mobile phoneDamage, etc. This is mostly because the user runs out of battery and the phone automatically shuts down. The solution to this situation is: remove the battery, wait 5 minutes, then reinstall the battery, and then connect the charger to charge, 30 minutes later, and then restart. Whether the phone uses a regular original Xiaomi charger.
4, the mobile phone protection case is too thick: when the mobile phone protection case is too thick, it will affect the wireless charging of the mobile phone. Therefore, we can take off the mobile phone protective shell and then charge it. Motherboard failure: After the above operation, if the fault is still, then we had better be able to take the phoneTo the mobile phone repair shop for warranty treatment or maintenance, must not be in the case of experience, randomly disassemble the machine to avoid unnecessary losses.
5, the magnetic shell is damaged or worn, and the magnetic shell is replaced. The damage or wear of the Mi 14 magnetic shell causes damage to the magnets or conductive materials inside the magnetic shell, resulting in the magnetic field or electric field during wireless charging cannot work properly, resulting in the failure of wireless charging of the MI 14. It is necessary to replace the magnetic shell to make the MI 14 use the magnetic shell for wireless charging.
6, if there are obstacles between the charging board and the mobile phone, such as keys, coins, etc., it will affect the charging effect, and it needs to beThey move away. The phone case is too thick thick protective case may affect the charging effect, try to take down the phone case and then charge. The charger is not the original charger may make the wireless charging ineffective, remember to use the original Samsung charger.
First check whether the charger is original, the output current and voltage are no problem. 2. Check whether the charging data cable is original, whether the interface is well connected, and whether the data cable is damaged. 3, if it still doesn't work, try replacing the battery. 4, if the above are invalid, that is, there is a problem with the charging board, it is recommended to send to the official after-sales service center, by the engineer to help check and deal with.
Mi MIx2s will not be powered off when fully charged. After full charge, the battery power remains at 100%, the charging breath light is not on, the battery icon in the status bar is green, and there is a lightning mark for charging. However, the system will know that it is converted to trickle charging mode, which does no harm to the phone.
If the reason for excluding the charger (you can change the charger) or the reason for the charging cable (change the charging cable) can not be charged normally. It's probably a wired charge connectionWhen the port is broken and the wireless charging can be charged, the power management chip should be normal.
Check whether the connection is loose. Connect the WiFi with another phone or device to see if it can be used, and if possible, eliminate the problem of WiFi itself. Restart the router or restore the router to factory Settings, then dial up again, and reset the WiFi according to the setup wizard, or replace the new router and dial up the Internet. Contact broadband customer service to confirm whether the broadband account is abnormal.
Mi mix2s supports wireless charging. Millet mix2s battery capacity of 3400mAh, support 5W wireless fast charging, support Qi wireless charging standard, adapt to all kinds of Qi standard wireless chargers, wired charging support QC0 fast charging, USB Type-C double-sided charging interface.
However, wireless charging also has disadvantages. Due to the use of electromagnetic induction technology, wireless charging is relatively less efficient, which means that the amount of power charged in the same time may be less than that of wired charging. In addition, since wireless charging requires the use of a relatively close distance between the transmitter and the receiver, it will be affected by environmental factors, and if the environment is too noisy, it may also affect the wireless chargingEffect.
First of all, we need to confirm whether our Mi 11 supports wireless charging. You can view this information in your phone's Settings. Enter "Settings" - "Battery and Performance" - "Wireless charging", if the "wireless charging" option appears, it indicates that the device supports wireless charging. After confirming that the device supports wireless charging, we need to prepare a wireless charger that supports the Qi standard.
Can be no power, the protection state is blinkingShuo. When the millet wireless charger, millet wireless charger (universal fast charging version) LED light status is green flashing, millet wireless charger is in the error and protection stage. At this time, you should pay attention to whether there is a metal object placed on the wireless charger, please remove it and charge it again. The power will be off for a while, this is not placed in the right position, detected metal foreign objects, automatic protection Settings.
Charger failure: Try to use the same specifications of the charger for charging, if it can be successfully charged, it is the original charger failure, to replace. Loose or damaged charging cable: Check that the charging cable is securely connected to the device and power adapterBetween. If the charging cable is loose or damaged, the current cannot be transmitted normally and the charge cannot be made. To replace a new charging cable, make sure the plug fits the connector tightly.
The reasons why millet mobile phones do not charge for no reason may be: the battery has entered a hibernation state, the charger is damaged, the phone is damaged, etc. This is mostly because the user runs out of battery and the phone automatically shuts down. The solution to this situation is: remove the battery, wait 5 minutes, then reinstall the battery, and then connect the charger to charge, 30 minutes later, and then restart. Whether the phone uses a regular original Xiaomi charger。< / p >