Insert the usb wireless network card into the usb port of the computer to ensure sufficient power supply. If the computer cannot be recognized normally, try to replace the usb port of the computer to check whether it is normal until the display is normal. 2 After confirming that the wireless network card is normally inserted into the usb port of the computer, place it on the right of the computer desktopClick Computer and select Properties.
The driver for thenetwork adapter may be corrupted or incompatible, causing the system to not detect it properly. You can try updating or reinstalling the driver to resolve this issue. First, visit the computer manufacturer's official website to find the latest drivers that correspond to your adapter model. After downloading and installing the driver, restart your computer for the changes to take effect.
Driver problem: The network adapter may not be installed correctly or may be damaged. The workaround is to reinstall or update the driver for the adapter. In Device ManagerLocate the network adapter, right click and select "Update Driver". If you have an installation disc for the adapter or can download the driver from the manufacturer's website, you can choose to install the driver manually.
If you want to determine the system version, you can check in Start - Settings - System - About. To install updates, you can install available updates in Start - Settings - Update and Security -Windows Update by clicking Check for Updates. The RNDISUSB NIC device is connected to the computer before using the following steps. If the RNDISUSB NIC device is connected, change the U of a computerIf the SB slot is connected, these steps need to be performed again.
When Windows 10 prompts "This interface is not supported", it may be due to system file corruption or incompatible drivers. Here are some workarounds: Update Driver: Open the Device Manager, locate the problem device, right click and select "Update Driver". If an update is available, it will be downloaded and installed automatically. Run the system File Check tool: Open the command prompt and run as an administrator.
If the RndisUSB NIC of Windows 10 does not work properlyYou can try the following solutions: Check the driver: First, ensure that the driver of the RndisUSB network card is correctly installed. You can try to reinstall or update the driver by downloading the latest driver from the manufacturer's official website. Reconnect the device: Disconnect and reconnect the RndisUSB device, then see if it recognizes and works properly.
The mobile phone system is faulty. Back up mobile phone dataRestore the phone's factory Settings, and then try to search for wifi again to connect to the Internet; The phone hardware is faulty. When the mobile phone cannot use multiple other normally available wifi for Internet access, it is recommended to repair the network fault directly at the after-sales point; The wireless router is faulty. Reset the wireless router to factory mode and reset the Internet access parameters before connecting to the network.
The Internet access mode in the router (some routers are called: networking mode, connection type, WAN port connection type, etc.), if the setting is wrong, it will cause the router to fail to connect to the wifi, that is, it cannot connect to the wifiNormal operation. In some areas, broadband operators will restrict users from using routers to access the Internet by binding the user's computer MAC address. In this case, the router cannot be connected to the network after normal Settings.
The network cable is inserted into the wrong place, and the cat or incoming cable is inserted into the wan port of the router. You got the wireless router next door. You got the wireless router next door. Signal conflict The signal conflict in your phone leads to confusion and can not access the Internet, in this case so that the phone's stored signal is deleted and then reconnect.
The router cannot connect to the networkCan cause analysis and elimination. If the network cable or wireless NIC is loose, you may find the installation position for the wireless NIC and reinstall it. The wireless network card is less likely to decline or fail. WiFi signal environment is not too far away from the wireless router usually 10m, notebook wireless card usually transmit power is not large.
No way, had to find the same installed Windows 7 friend, with his computer wirelessly connected to the author's wireless router, but found that there is also no connection problem. Therefore, it is determined that the wireless router may be inconsistent with the wireless network system of Windows 7PRRRRR. Therefore, I replaced a Huawei 3Com wbr204g wireless router for testing, and found that Windows 7 system successfully connected to the wireless router and could access the Internet.
1, according to the setup wizard set step by step, choose the Internet access method, usually ADSL users choose the first PPPoE, if using other network service providers, choose the following two items according to the actual situation, if you do not knowHow to choose, directly select the first automatic selection can be convenient for novice operation, select the next click.
2, please do not go through the router, directly let a machine link cat Internet.
3, if you buy a wireless router, you must first ensure that two computers have wireless network adapters, and one of them can be wired to access the Internet, so that wireless routing can achieve wireless Internet access. If a computer can have wired Internet access and a wireless network adapter, install the same version of "flash link" on both computers, and wireless Internet access can be achieved with simple Settings.