1, in this case, it is necessary to check whether the desktop of the wireless charging station is placed with other debris, if other debris is placed, the wireless charging station of the crown road will emit a drop alarm sound, and the owner usually tries not to place items on the wireless charging station. There is also a case that there can be no metal items outside the phone, otherwise the crown wireless charging function can not work, and it will emit a drop alarm sound.
2, fault cause 1: wireless charging protocol is incompatible. Use vehicle fromTo charge the mobile phone with the wireless charging device, the wireless charging protocol in the mobile phone needs to be compatible with the wireless charging protocol carried by the vehicle in order to successfully achieve wireless charging. After the vehicle wireless function is turned on, the charging device that is not compatible with the protocol is placed on the wireless charging panel, which will trigger the vehicle alarm prompt, and the buzzer will emit a drip sound.
3, but once you can not charge, then there will certainly be some problems, you need to check the charging situation in the end. Once the charger is in poor contact, it is easier to have such a drop sound, so you only need to do a good job of basic inspection work. Department ofProblems caused by failure: If the normal use of the device cannot be restored after the reset, it is likely to be caused by a system failure.
4, generally there is no charging drop called products if it is a drop drop called must be an alarm. See if the instructions explain it. If not, it's an alarm about his product. Only their maintenance staff can know this. It's best not to rush like this because it might be dangerous.
Use the following method: Plug inAfter the power supply, the light can be lit by touching any position of the curved light pole with your finger. Put the device that needs to be charged under the lamp, switch the mobile phone to the wireless charging mode, and put it into the wireless charging induction area of the lamp. Use the phone charging cable to connect the lamp USB port to the phone, and the phone can also be charged.
How to use Huawei wireless charging desk lamp? In addition to being able to turn on and off by touch, there are more detailed adjustment functions on its panel, and you can adjust the brightness of the light stepless with a finger swipe, the experience is exactly the same as adjusting the brightness of the mobile phone, and because this operation does not involve mechanical movement, soThere will never be wear and tear and aging, and the experience will be the same no matter how long you use it.
The principle of wireless charging lamp is to use wireless current. The voltage is placed on a fixed charging device for charging. But the charging disc still needs to be plugged in. That's why he charges the wireless charging light. There are many charging devices like this, such as mobile phones can now also achieve wireless charging. It also requires a fixed device that emits after being switched on. The mobile phone can receive the signal to charge the mobile phone wirelessly.
There is not one to be seen on its flat, smooth base panelProtruding button, but with a bold and concise icon, the use of the same as the mobile phone, with a finger gently touch the power button, you can instantly light up, shutdown operation is the same.
See if there is a two-dimensional code under the lamp, scan the phone, prompt to download the APP, you can control the phone APP.
Vigorous learning light can be charged wirelessly. Strong learning lights can be charged both wirelessly and wired. The Vigorous learning lamp uses a unique twin wing cap design, eachThere are 28 light beads on the side, three-dimensional surround lighting, and light covers every inch of the desk. Strong learning light support wireless charging three dimming, built-in Bluetooth speaker light multi-purpose, to achieve children's colorful learning life.
Strong intelligent work lights also have strong practicality and durability. It uses high-quality materials and processes to ensure the stability and durability of the product. At the same time, it also supports wireless charging and mobile phone APP remote control, providing users with more convenience. These practical functions and excellent quality make Great power intelligent work lights become a cost-effective product.
ThisThe bulb has a built-in battery that can be recharged via a wireless charging dock. The use of this light bulb does not need to plug in, easy to carry and move.
General charging lamp can be used for how long, the first charge takes about eight hours, after each charge is almost four or five hours can be used for two to three hours each time. Wireless charging desk lamps are still relatively few in our actual life, and rarely touched.
This kind of music desk lamp generally can not wireless charge the mobile phone, and now there is only that kind of small disk for wireless charging, like your music desk lamp, it must still need a wire connectionThere's no connection and that certainly means, well, there's not much of that effect, so you still need to get through some connection. Table lamps are classified into reading lamps, decorative lamps, accompanying reading lamps, and portable lamps according to their functions.
Wireless devices also need power support, but if you can charge wirelessly, you do not need to plug in. The principle of wireless charging lights is to use wireless current. The voltage is placed on a fixed charging device for charging. But the charging disc still needs to be plugged in. That's why he charges the wireless charging light. Like this charging deviceMany, such as mobile phones can now realize wireless charging.
After powering the wireless charger, directly place the phone screen facing up in the center of the charger or the position suggested by the manufacturer to charge.
Hello, please charge the phone with the screen facing up in the center position of the charger or the position suggested by the charger manufacturer.
Open Settings on your phone. Click the "Battery" option. Turn on the Wireless reverse charging switch.
2, the power is too low. Wireless charging desk lamp flashing is too far away from the electric disk, should be put closeDot. It is also possible that the input voltage is unstable. It's simple. Discharge regularly. For example, every month, if there has been no power failure, do not plug in the AC plug, turn on the light, until the light is not bright, indicating that the electricity has been discharged. Plug in the AC power. You can change a longer plugboard to solve the problem of false contact.
3, slow charging speed: Due to the current mobile phone and other receiving devices, most limit the input power, so the charging speed is slow. The cost is high: the charger needs to have the electronic circuit of the push coil, and the electric device needs to have the electronic device of the power conversion, both need to have the coil, andAnd high-frequency filtering circuits are required to meet electromagnetic compatibility, so the cost is higher than direct charging.
4, the general charging lamp can be used for how long, the first charge takes about eight hours, after each charge is almost four or five hours can be used for two to three hours. Wireless charging desk lamps are still relatively few in our actual life, and rarely touched.
5, two possibilities, one, the charging indicator is broken, but does not affect the charging second, the charging circuit is broken, has not been charged, can only use direct power supply in addition, if the rechargeable battery is broken, the charging indicator is still brightThe charging head that comes with the machine or purchased separately) is connected to the power supply. Connect the data cable Connect the charger to the wireless charger using the data cable. Place the phone Place the rechargeable area of the phone in the center of the upper surface of the wireless charger, and the phone shows that it is charging. The specifications of the charger used with the wireless charger will affect the actual wireless charging power. You are advised to use the standard charger provided by the mobile phone, and the maximum wireless charging power supported by the mobile phone is not exceeded.
2, connect the phone's standard charger and data cable to the wireless charger, and then put the phone directly (vertically) or horizontally in the center position of the wireless charger base, that isWireless charging can be achieved, the indicator light will have a breathing effect, 5 seconds after the extinguishment, plug and play, convenient and quick. More use doubts can enter vivo official website -- my -- online customer service -- input labor, consult online customer service feedback.
3, the mobile phone uses wireless charging, you need to buy wireless charging base or wireless charging back shell can be used. Connect the charger to the wireless charging base, and then place the phone or a phone with a wireless charging back case on the wireless charging base. If the phone's leather case is too thick or not the original charging case, it may affect the charging effect, and it is recommended to remove itHolster after charging attempt.