1, the mobile phone calls vibration, the mobile phone position may change, resulting in the wireless charger stop charging, it is recommended to turn off the mobile phone vibration function when wireless charging. If the above methods do not solve the problem, please back up the phone data in advance, and bring the wireless charger, wired charger set and purchase voucher to vivo customer service center for testing.
2, vivo mobile phone has no wireless charging function, naturally can not wireless charging, this is no way, because wireless charging requires the mobile phone to support wireless charging function, otherwise there is no way to wireless chargingElectricity can only be charged using a data cable.
3, the mobile phone vertically placed on the wireless charger charging: please first put the wireless charging pad height block on the tray of the wireless charger, increase the tray height, and then put the mobile phone on the wireless charger charging; Horizontal charging of the mobile phone on the wireless charger: The mobile phone can be directly placed on the wireless charger to charge without placing the wireless charging pad. If the wireless charging pad has been placed before, please remove it first and then charge it horizontally.
4, connect the phone's standard charger and data cable to the wireless charger, and then put the phone on the wireless charger baseThe left and right center position can realize wireless charging, the indicator light will have a breathing effect, and it will be extinguished after 5 seconds, plug and play, convenient and quick.
5, vivo mobile phone does not support wireless charging function, so it is unable to use wireless charger. Note: Most models of vivo mobile phone support dual-engine flash charging function. Dual engine flash charging system with innovative dual charging chip and dual charging circuit, two sets of circuits at the same time power supply, bring faster and more stable charging effect.
6, charging status check: During the charging process, the phone screen usually displays the charging status. The user can view the screen or form by viewingIf so, try taking off the phone case and charging it again.
2, because some mobile phone protective cover is too thick, or the material of the mobile phone protective cover may affect the recognition function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protective cover and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
3, check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Verify that the wireless charger indicator light is on normally, and check the charging baseIf the connection between the seat, data cable, charger and power supply is in poor contact, it is recommended to re-plug it. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
4, the charger is faulty, the charging cable is loose or damaged, the input power is insufficient, etc. Charger failure: Try to use the same specifications of the charger for charging, if it can be successfully charged, it is the original charger failure, to replace. Loose or damaged charging cable: Check that the charging cable is securely connected between the device and the power adapter.If the charging cable is loose or damaged, the current cannot be transmitted normally and the charge cannot be made.
5. The reasons are as follows: Click the button in the notification bar to enable wireless backcharging. The charged device needs to be placed in the correct position in the center of the rear cover. The device to be charged needs to support the standard Qi wireless charging protocol (for example, AppleWatch is a non-Qi wireless charging device, which cannot be charged through the wireless backcharging function). There should be no metal ornaments or foreign objects between the phone and the device being charged.
6, cause: The system program has a problem, resulting in the charging function of the hardware is not normal, it is recommended toThe phone can be restored and used normally.
1, the charging position is not correct Check whether the phone is facing the center of the wireless charging board, if not, it may lead to failure to charge. If there are obstacles between the charging pad and the phone, such as keys, coins, etc., it will affect the charging effect and they need to be removed. The phone case is too thick thick protective case may affect the charging effect, try to take down the phone case and then charge.
2, shutdown charging test. Replace the charging position and eliminate the intermittent failure caused by poor socket contact. If conditions permit, replace the standby charger for testing. Or send the repair test to boot charging, such as the mobile phone is equipped with a third-party plug-in such as charging doctor, it is recommended to uninstall the test.
3, finger or screen whether there is liquid or stains finger or screen liquid or stains will affect the sensitivity of the touch screen, it is recommended to clean with a clean dry cloth before trying. Check the film if you use a non-original film, it may affect the touch screen effect. You are advised to remove the film or go to customer serviceHeart relamination.
4. If the touch screen of a Huawei mobile phone jumps or touches automatically, perform the following operations: 1. If random jumping or ghost hands occur when you use a third-party charging device or a fixed place to charge, it may be caused by unstable power supply voltage. You are advised to replace the Huawei charger or charge the device in another place (replace the power supply).
5, when the power button of your Xiaomi mobile phone fails, do not worry, we provide you with the following three methods, so that you can easily restart the phone. Connect the charger First, make sure your phone is fully charged. However,After that, connect the damaged power button of the phone to the charger. Wait a few seconds and see if the phone starts to boot. If you hold the volume up button or volume down button for a long time while connecting the charger, sometimes it can also trigger the boot.
6, if the screen touch is not sensitive in the fall or liquid appears, it is recommended that you take the machine to vivo customer service center for testing. Replace the standard charger or data cable If you use a non-standard charger, it may affect the touch screen function of the phone when charging the phone, it is recommended to use the standard charger and data cable to charge. Restart the phone Restart the phone or forcibly restart the phoneTry it and see if it's back to normal.
1, check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Verify that the center position of the phone is placed in the center of the wireless charging base during charging, and remove other objects between the device and the wireless chargerGoods (such as bus passes, metal and other substances).
2, because some mobile phone protective cover is too thick, or the material of the mobile phone protective cover may affect the recognition function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protective cover and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
3, check the charger and power adapter: make sure that the wireless charger and power adapter you use is compatible with Mate 30. Sometimes, incompatibleThe charger may not work properly. It is recommended that you use original or certified chargers and adapters. Clean and inspect the device: Check your Mate 30 and wireless charger for any dust, dirt, or foreign objects. These substances may interfere with the normal operation of the wireless charging function.
4, replace the wireless charger: When our mobile phone appears in such a situation, it is likely that we have a problem with the charger, at this time we can replace a wireless charger to try (original wireless charger or usb data cable) restore factory Settings: if the fault is still on after the boot, at this time weYou can try to restore the phone to factory Settings.
5, make sure that the phone and wireless charger compatible: to make sure that your phone supports wireless charging function, and the wireless charger is compatible with your phone model. Different phone models may have different charging standards, so you must use a wireless charger that supports your phone model. Check the charger and power adapter: Make sure that the wireless charger is working properly and that the appropriate power adapter is connected, and that the power adapter is securely plugged into the power outlet.
6, mobile phones do not support wireless charging, Huawei car wireless charger only supports qi wireless charging standard mobile phone. The charging distance is too far, and the wireless charging distance is generally less than 5mm. Chargers are not compatible with mobile phones, and some in-car wireless chargers only support certain brands or models of mobile phones.