If the vivo/iQOO Bluetooth headset or charging case is not charged, please check whether the charging case is charged (whether the indicator light is on), and whether the charging contact at the bottom of the headset is dirty. If there is dirt, please clean it with dry cloth or dry paper towel; If the vivo/iQOO wireless headset can not be charged, please plug and unplug several times when charging, or replace another charging head and charging cable to see whether it can be charged.
Failure to charge the headset may be caused by damage to the charging compartment. Solution: Users need to check the Bluetooth headset charger is notThere is damage, if you find damage, you can change the charging bin to charge the Bluetooth headset to try. Bluetooth headset charging should try to use the original charging bin, so as to better protect the battery of the Bluetooth headset, and power is easier to import into the battery inside the headset.
The reasons why the Bluetooth headset cannot be charged are as follows: the charger is broken or the jack is in poor contact. It may be that the use of the charger for a long time makes the charger socket loose and the poor contact results in the inability to charge the Bluetooth headset normally. I suggest you try a new charger. The charging port of the Bluetooth headset is loose, resulting in poor contact. Check the charging port on your Bluetooth headset,Whether there is loosening, poor contact, resulting in failure to charge normally.
Clean contacts: Use a clean, soft cloth or cotton swab to gently clean the charging jack and earphone charging contacts. Sometimes dust or dirt may cause poor contact. Replace the charging cable: Try using another charging cable and make sure that the charging cable itself is not damaged or loose. Sometimes the charging cable itself may have problems resulting in poor contact.
Bluetooth headset or headset case does not charge, generally due to the charging head, data cable is not compliant, charging port or earphone shrapnel is dirty, you can try the following methods to check: use the originalData cable, and replace the regular brand charging head try. If the battery runs out, please charge the charging case and the earphone cover for 30 minutes and try again. It is recommended to charge the headset in a suitable environment and avoid charging in a high or low temperature environment.
The charging bin has power, but the Bluetooth headset is dead, indicating that the charging bin has not charged the Bluetooth headset.
vivo/iQOO Bluetooth headset or charging case is not charged, please check whether the charging caseThere is electricity (whether the indicator light is on), and whether the charging contact at the bottom of the headset is dirty. If there is dirt, please clean it with dry cloth or dry paper towel; If the vivo/iQOO wireless headset can not be charged, please plug and unplug several times when charging, or replace another charging head and charging cable to see whether it can be charged.
What is the reason why the Bluetooth headset can not be charged? The charger is broken or the jack is in poor contact. It may be that the use of the charger for a long time makes the charger socket loose and the poor contact results in the inability to charge the Bluetooth headset normally. I suggest you try a new charger. Check the charging port on the Bluetooth headset. Is itLoose, poor contact, resulting in failure to charge normally. The battery of the Bluetooth headset is damaged, so it cannot be charged.
Failure to charge the headset may be caused by damage to the charging compartment. Solution: The user needs to check whether the Bluetooth headset charger is damaged, and if it is found damaged, you can change the charging bin to charge the Bluetooth headset to try. Bluetooth headset charging should try to use the original charging bin, so as to better protect the battery of the Bluetooth headset, and power is easier to import into the battery inside the headset.
Tip: The charging contact is the only channel for communication between the charging box and the headset. If the charging contact is not in good contact due to dirt and other reasons, the headset will not be charged in the box and the headset will be connected continuously with the cover closed. Check the charging box: take out both ears (the normal charging box indicator light is on and then off), if the red light or no light, charge for 15 minutes and then try again. After charging, the indicator light turns yellow or green indicating that the charging box is normal.
vivo/iQOO Bluetooth headset or charging case is not charged, please check whether the charging case has power (indicator lightWhether it can be lit), and whether the charging contact at the bottom of the headset is dirty. If there is dirt, please clean it with dry cloth or dry paper towel; If the vivo/iQOO wireless headset can not be charged, please plug and unplug several times when charging, or replace another charging head and charging cable to see whether it can be charged.
If the charging light of the Bluetooth headset is not on, it may be the following reasons: The charger or USB cable is poorly connected. Check that the charger and USB cable are properly connected to the headset, and make sure that the plug fits tightly into the port. Low power. The charger is damaged. Try another headset with your current charger. The charging circuit of the headset is faultyIt doesn't charge, and the lights don't light. If this problem must be repaired.
Failure to charge the headset may be caused by damage to the charging compartment. Solution: The user needs to check whether the Bluetooth headset charger is damaged, and if it is found damaged, you can change the charging bin to charge the Bluetooth headset to try. Bluetooth headset charging should try to use the original charging bin, so as to better protect the battery of the Bluetooth headset, and power is easier to import into the battery inside the headset.
The reasons why the Bluetooth headset cannot be charged are as follows: the charger is broken or the jack is in poor contact. May be long-term use of the chargerThe charger socket is loose, and the poor contact results in the inability to charge the Bluetooth headset normally. I suggest you try a new charger. The charging port of the Bluetooth headset is loose, resulting in poor contact. Check the charging port of the Bluetooth headset, whether there is loose, poor contact, resulting in normal charging.
The possible reasons for the earphone failure are as follows: The charging case is out of power: You can try to put the earphone in the charging case, and make sure that the charging case is open, and wait for a period of time to see whether it can be charged successfully. Charger problem: Please check whether the charger you are using is the original charger, or whether it has beenAfter damage, you can try to replace the charger and recharge.
If the vivo/iQOO Bluetooth headset or charging case is not charged, please check whether the charging case is charged (whether the indicator light is on), and whether the charging contact at the bottom of the headset is dirty. If there is dirt, please clean it with dry cloth or dry paper towel; If the vivo/iQOO wireless headset can not be charged, please plug and unplug several times when charging, or replace another charging head and charging cable, seeNo can be charged.
Poor contact; Not connected; Because the Bluetooth chip built-in program of the new headset is not activated, or the headset memory connection number is full; The output voltage of the charger is too large or too small, the standard should be between 5-5 volts; Battery contact is poor, or the protection board is damaged, you can check it with a voltmeter, or it may be the internal line is damaged; The charger is broken; Can not be processed to the after-sales service processing.
To be precise, it is low voltage, low battery suspended animation phenomenon! The solution is very simple, this morning I conducted a simple test on this problem, took a long time to use the BluetoothEarphone, charging, the result of the red light has been flashing, the charge does not go in, also can not open the machine (ask, no electricity how to turn on). Need to activate the battery! No need to disassemble anything! Solution: Short connection of the positive and negative poles, the time should not be too long.
1. If the vivo/iQOO Bluetooth headset or charging case is not charged, please check whether the charging case has electricity (whether the indicator light is on), and whether the charging contact at the bottom of the headset is dirty. If there is dirt, please clean it with dry cloth or dry paper towelNet; If the vivo/iQOO wireless headset can not be charged, please plug and unplug several times when charging, or replace another charging head and charging cable to see whether it can be charged.
2, the headset can not be charged may be caused by the charging bin damage. Solution: The user needs to check whether the Bluetooth headset charger is damaged, and if it is found damaged, you can change the charging bin to charge the Bluetooth headset to try. Bluetooth headset charging should try to use the original charging bin, so as to better protect the battery of the Bluetooth headset, and power is easier to import into the battery inside the headset.
3. FirstCheck if your home is powered off or out of power, or if the connection between the charger and the socket and the Bluetooth headset is normal; It may also be that the charger of the Bluetooth headset is broken, you can change a charger to try again, or connect the charger to other devices to see if it can be charged normally. It may be that the Bluetooth headset is not used for a long time, causing the battery of the Bluetooth headset to enter the hibernation state, you can charge it for a while and then try to see whether the indicator light is on.
4, the Bluetooth headset can not be charged for the following reasons: the charger is broken or the jack is in poor contact. It may be that the use of the charger for a long time makes the charger socket loose and poor contact leads to failureCharge the Bluetooth headset normally. I suggest you try a new charger. The charging port of the Bluetooth headset is loose, resulting in poor contact. Check the charging port of the Bluetooth headset, whether there is loose, poor contact, resulting in normal charging.
5, accurately speaking, it is low voltage, low voltage battery suspended animation phenomenon! The solution is very simple, in the morning, I carried out a simple test on this problem, took a Bluetooth headset for a long time, charging, the result of the red light has been flashing, the electricity does not go in, and can not open the machine (ask, no electricity how to turn on). Need to activate the battery! No need to disassemble anything! Work outWhat's the reason? '> Why can't the Bluetooth headset be charged?
1. If the vivo/iQOO Bluetooth headset or charging case is not charged, please check whether the charging case has electricity (whether the indicator light is on), and whether the charging contact at the bottom of the headset is dirty. If there is dirt, please clean it with dry cloth or dry paper towel; If the vivo/iQOO wireless headset can not be charged, please plug and unplug several times when charging, or replace another charging head and charging cable to see whether it can be charged.
2, poor contact; Not connected; And because the new headset's Bluetooth chip has no built-in programActivated, or headset memory connection times are full; The output voltage of the charger is too large or too small, the standard should be between 5-5 volts; Battery contact is poor, or the protection board is damaged, you can check it with a voltmeter, or it may be the internal line is damaged; The charger is broken; Can not be processed to the after-sales service processing.
3, what is the reason why the Bluetooth headset can not be charged? The charger is broken or the jack is in poor contact. It may be that the use of the charger for a long time makes the charger socket loose and the poor contact results in the inability to charge the Bluetooth headset normally. I suggest you try a new charger. Check the charging port on the Bluetooth headset. Is itLoose, poor contact, resulting in failure to charge normally. The battery of the Bluetooth headset is damaged, so it cannot be charged.
4, the headset can not be charged may be caused by the charging bin damage. Solution: The user needs to check whether the Bluetooth headset charger is damaged, and if it is found damaged, you can change the charging bin to charge the Bluetooth headset to try. Bluetooth headset charging should try to use the original charging bin, so as to better protect the battery of the Bluetooth headset, and power is easier to import into the battery inside the headset.
5, no use for a long time, no charging, the battery because there is no electricity, damaged. 2 The battery life is exhausted due to frequent use. 3 The charger is faulty. 4 Bluetooth charging base problem. It's usually the battery. We need to change the battery. This to open, but difficult to recover, recovery is very ugly, now Bluetooth is not expensive, it is recommended to replace.