The green light of millet wireless charging will not flash three times, there are the following reasons: because the connection failure caused by the mobile phone protective shell is too thick. Wireless charger is not the official original charger, resulting in the mobile phone identification device is not successful. The wireless charger is in poor contact, resulting in the failure to perform normal wireless charging operations. The data line of the wireless charger is abnormal, resulting in the wireless charger cannot work normally.
Solution: If you encounter the situation that the green light of the millet wireless charger flashes, the user can tryHere are the solutions. First, check that the connection between the charger and the device is secure and ensure that the device is properly placed on the charger. Second, check whether the device itself has a charging problem, you can try to use a wired charger to charge to eliminate the problem of a wireless charger.
If the indicator blinks, it indicates that the charging status is abnormal and wireless charging cannot be performed. The following exceptions may exist: The mobile phone is incompatible with the wireless car charging protocol. The phone does not support wireless charging.
The green light of the millet wireless charger has been blinking because the automatic protection setting of the charger has detected a metal foreign body. DangchongWhen the appliance encounters a metal foreign body near, it will automatically cut off the wireless charging, and continue to flash the green light, and return to normal after the power failure. It is recommended to check whether there is metal on the back of the phone or metal interference near the charger.
Can be out of power, the protection status is blinking. When the millet wireless charger, millet wireless charger (universal fast charging version) LED light status is green flashing, millet wireless charger is in the error and protection stage. At this time, you should pay attention to whether there is a metal object placed on the wireless charger, please remove it and charge it again. It'll just take a second. It's not in the right place. Metal foreign object detected. Automatic2 >
The biggest possibility is that the location is not right, after you get your phone case is too thick.
The distance between the charger and the phone is too far or there are metal objects blocking, the battery of the charger or the phone is insufficient, and the charging interface of the charger or the phone is damaged. The distance between the charger and the phone is too far or there are metal objects: Close the distance between the charger and the phone to ensure that there are no metal objects in the way. Low battery of charger or mobile phone: Check whether the battery of charger and mobile phone is sufficient, if insufficient, please charge in time.
Is charging indication: when the millet noWhen the green light on the line charger starts flashing, it usually means that the charger is charging the device. This is a standard charging indication that the charger has been properly connected and is transmitting power. Possible problems or anomalies: However, a flashing green light may also indicate that some problem or anomaly has been encountered during charging.
1, the distance between the charger and the phone is too far or there are metal objects to block, the charger or the phone's power is insufficient, the charger or the phone's charging interface is damagedAnd other reasons. The distance between the charger and the phone is too far or there are metal objects: Close the distance between the charger and the phone to ensure that there are no metal objects in the way. Low battery of charger or mobile phone: Check whether the battery of charger and mobile phone is sufficient, if insufficient, please charge in time.
2, millet wireless charger flashing green usually means that it is charging, but there may be some problems or abnormal conditions in the charging process. Indication that it is charging: When the green light on the Xiaomi wireless charger starts to flash, it usually means that the charger is charging the device. This is a standard charge indication, indicatingThe charger is properly connected and transmitting power.
3, the green light of millet wireless charger has been blinking because the charger has detected the automatic protection setting of metal foreign bodies. When the charger encounters a metal foreign body near, it will automatically cut off the wireless charging, and continue to flash the green light, and return to normal after the power failure. It is recommended to check whether there is metal on the back of the phone or metal interference near the charger.
4. If the indicator flashes, it indicates that the charging status is abnormal and wireless charging cannot be carried out. The following exceptions may exist: The mobile phone is incompatible with the wireless car charging protocol. The phone does not support wireless chargingElectricity.
5, off the power and so on for a while, this is not put in the right position, detected metal foreign bodies, automatic protection Settings to determine the use of the official charging head. Second, look carefully at the wireless charging instructions, encounter a metal foreign body near, it will automatically cut off wireless charging, and continue to flash the green light, and return to normal after power off. Check to see if there is metal on the back of your phone, or if there is metal interference nearby, such as your "gold" (iron) ring.
1, if the green light flashesYou can try the following steps: Make sure the device is tightly connected to the charger, gently adjust the position, and you may see a change. Try using a wired charger to charge your device and see if you still have the same problem, ruling out the problem with the wireless charger. If the above methods do not work, you may need to consider replacing the charger or ask Xiaomi customer service for help.
2, millet wireless charger flashing green usually means that it is charging, but there may be some problems or abnormal conditions in the charging process. Indication that it is charging: When the green light on the Xiaomi wireless charger starts flashing, it usually means that the charger is workingCharge the device. This is a standard charging indication that the charger has been properly connected and is transmitting power.
3, the distance between the charger and the phone is too far or there are metal objects to block: The distance between the charger and the phone is closer to ensure that there are no metal objects to block. Low battery of charger or mobile phone: Check whether the battery of charger and mobile phone is sufficient, if insufficient, please charge in time. Charging interface of charger or mobile phone is damaged: If charging interface of charger or mobile phone is damaged, please contact after-sales service for repair or replacement.
4, can be out of power, the protection state is blinking.When the millet wireless charger, millet wireless charger (universal fast charging version) LED light status is green flashing, millet wireless charger is in the error and protection stage. At this time, you should pay attention to whether there is a metal object placed on the wireless charger, please remove it and charge it again. The power will be off for a while, this is not placed in the right position, detected metal foreign objects, automatic protection Settings.