1, when the millet wireless charger, millet wireless charger (universal fast charger) LED light status is green flashing, millet wireless charger is in the error and protection stage. At this time, you should pay attention to whether there is a metal object placed on the wireless charger, please remove it and charge it again.
2. Plug in the data cableMillet phone, at this time the normal indicator light does not respond or flash. At this time, open the back cover and take out the battery, as shown in the figure (the data cable is still plugged in). If the screen displays a startup interface at this time, the charging is successful, and the battery can be charged normally, and the indicator light flashes slowly for normal charging. If not, remove the battery again, normally for one success, usually no more than three times can be successful.
3. When the mobile phone is charged using the secure encryption flash charge device or QCQCUSB-PD0/0 (PPS), the dual lightning fast charge icon will be displayed on the right of the battery icon in the status bar; Charge 30W or aboveIf the electric power security encryption flash charge device is plugged in to charge under the lock screen state, you can see a new charging animation and the percentage point of electricity rapidly rise.
4, first of all, we need to confirm whether our millet 11 supports wireless charging function. You can view this information in your phone's Settings. Enter "Settings" - "Battery and Performance" - "Wireless charging", if the "wireless charging" option appears, it indicates that the device supports wireless charging. After confirming that the device supports wireless charging, we need to prepare a wireless charger that supports the Qi standard.
5, millet 9 twoWill is represented by data transmission.
Charging. Wireless charging technology comes from radio energy transmission technology, which can be divided into two ways: low-power wireless charging and high-power wireless charging.
Point the back of the Mi 12 towards the wireless charger and align it with the charging area, ensuring that the position between the phone and the charger is aligned. Wait for a moment, after the charging starts, the phone screen will show the charging prompt.
When the mobile phone is charged using the secure encryption flash charge device, QCQCUSB-PD0/0 (PPS), the status bar will display the dual lightning fast charge icon to the right of the battery icon; 30W or aboveIf the charging power of the secure encryption flash charging device is inserted into the lock screen state, you can see a new charging animation and the percentage point of electricity rapidly rise.
Indicator that it is charging: When the green light on the Xiaomi wireless charger starts flashing, it usually means that the charger is charging the device. This is a standard charging indication that the charger has been properly connected and is transmitting power. Possible problems or anomalies: However, a flashing green light may also indicate that some problem or anomaly has been encountered during charging.
1, Mi 12 does support wireless charging function. The phone uses the wireless charging technology of the Qi standard, and the user can charge the phone by placing it on the wireless charger that supports the Qi standard. The Mi 12 also has a specially designed receiver that can receive the energy transmitted by the wireless charger and convert it into the DC power supply required by the phone.
2, Mi 12 wireless charging coil is fixed between the main and secondary board covers. Millet 12 uses a small inductance coil to sense the energy of the sending end, and millet small inductance charging schemeThe receiving coil used has only about 1/3 of the sensing value of the traditional scheme, and under the same conditions, the loss can be reduced to more than half of the traditional coil.
3. Yes. Mi 12 supports a variety of charging methods, wired charging uses 67w seconds charging technology, only 39 minutes to full charge, and wireless charging uses 50w seconds charging technology, only 53 minutes to full 100 percent of the power, so Mi 12 can be charged wirelessly.
1, milletA flashing green light usually means that the wireless charger is charging, but there may be some problems or anomalies during the charging process. Indication that it is charging: When the green light on the Xiaomi wireless charger starts to flash, it usually means that the charger is charging the device. This is a standard charging indication that the charger has been properly connected and is transmitting power.
2, when the millet wireless charger, millet wireless charger (universal fast charger) LED light status is green flashing, millet wireless charger is in the error and protection stage. At this time should pay attention to whether there is a metal object placed on the wireless charger, pleaseRemove and recharge.
3, green light, often bright charging, protection mode flashing. After full standby power consumption is small, may flicker.
4, Mi 10 wireless charging As long as the wireless charger on the power, and then put the phone on the wireless charger can be. This feature is pretty cool. But not very practical, it is better to use the charger directly to charge fast and safe.
5, wait for the indicator to light up, indicating that the phone begins to charge. If the indicator light is not on, you need to adjust the position of the phone so that the distance between it and the charger is within 3mm. When the phone is finished chargingAfter completion, it can be removed from the millet wireless charger. Expanding knowledge: Xiaomi mobile phone is a series of mobile phone products equipped with MIUI operating system released by Xiaomi Technology Co., LTD. As of September 2021, Xiaomi has released its latest version, Xiaomi Civi.
6, the general millet phone power only shows 1%, can persist for a period of time, if the battery is completely out of power, that is, the battery is over-discharged, resulting in battery sleep, this time you need to connect the charger or power, wait for more than half an hour later, and then activate the phone.
Steps: System Settings Battery and performance Click Settings in the upper right corner to turn on wireless reverse charging.
First unlock the phone screen and enter the phone desktop. From the top of the desktop screenSlide down to pop up the Control center screen of the phone. Then find the "Wireless reverse charging" button and click to turn this feature on. Finally, you only need to put the charging device on the back of the phone to charge, and the phone will automatically recognize and start wireless charging. The above is about how to reverse charge millet 10 content introduction.
Open the key of the phone and click to enter the lower right corner. Mi 10Pro toughened film full screen coverage 8 youth version anti-peeping clear anti-blue light eye protection Rice screen saver mobile phone film ￥44 Taobao coupon purchase 2/5 and then here drop-down list, find power management. 3/5 Click to enter hereIn the power saving Settings, click open. 4/5 You can see wireless reverse charging, click open. 5/5 So you can charge other phones wirelessly.
First unlock the phone, find the Settings icon on the desktop, and turn it on. On the Settings page that opens, find the Battery and Performance options below and click. Once you are on the Battery and Performance page, click the hexagonal icon in the upper right corner to go to Settings. As shown in the figure, on the open page, the first option is the option of wireless reverse charging, which can be opened by turning on the switch on the right side.