Unplug the data cable orTurn the iPhone connector downward to drain the remaining liquid, and make sure there is no liquid in the gold finger part of the data cable. The charging port is facing down, and the "cold air" of the hair dryer is directed at the charging port of the iPhone for air drying treatment to ensure the air drying of the water, so as not to affect the normal charging. (Or use the back of the hair dryer, against the charging port, to suck the water out). Do not insert foreign objects (such as cotton swabs or paper towels) into the lightning connector to prevent debris from falling into it.
Power off immediately When the phone is flooded, the first thing to do is to turn the phone off or remove the battery. The purpose of this is to avoid the phone in the case of water wetShort circuit, damage the internal circuit and circuit board of the mobile phone. Use a tissue box cotton swab to drain as much water as possible from the phone and let it dry in the sun for a few days. Especially the headphone jack and charging power port connected to the inside of the phone.
The solution to the water in the charging port of the Apple phone is to wipe with cotton cloth, gently shake, use a hair dryer, use an electric fan, put it in a ventilated place, use a dehumidifier, use a wireless charging version, and set the drainage function of the phone. Wipe with a cotton cloth Dry the iPhone charging port and Lightning charger with a cotton cloth or lint free cloth.
Power off immediatelyIf water is found in the charging port, power off immediately to prevent current from passing through the charging port, resulting in short circuit or other damage to the phone. Remove the SIM card to prevent damage or corrosion to the SIM card. Wipe the charging port with absorbent paper or a dry towel to absorb as much water as possible.
This is the processing process of water in the charging port of Apple mobile phone. Turn off the phone: Turn off the phone as soon as possible to prevent the current from causing more damage to the inside of the phone through the part of the water. Unplug the charger: Unplug the charger first to avoid current entering the phone through the charger and aggravating the damagep>
Check whether the headset is still working, if it is working, turn off the headset as soon as possible, if it does not work, be sure not to try to turn it on. 3. Place the earphones in a rice jar or place the desiccant and Bluetooth earphones in a container. 4. After a few days, you can take out the Bluetooth headset, press and hold the headset on the key, see the headset flashing white light, you can work normally.
Method Blow dry if just AirPods headphonesIf the water is in the water, the charging box is still intact, you can wipe the water of AirPods first, and then turn the hair dryer to the cold air, and dry the AirPods. When blowing, do not blow only one position, and do not turn on the hot air to avoid the deformation of AirPods due to high temperature.
will be restored. AirPodsPro water sound quality will be restored, the first time after the earphone water will be hard to shake the phone, shake until there is no water, paper wrapped to dry the water, you can also use a hair dryer to deal with.
1, you can tilt the iPhone downward to avoid further liquid into the device. Then, you can try to gently wipe the lightning connector and charging cable with a clean cloth. If the problem persists, it is recommended to place the iPhone in a ventilated, dry area. If the liquid is a beverage such as coffee, tea or cola, it is recommended not to attempt to charge it until it is completely dry.
2. Unplug the data cable or accessory, drain the remaining liquid from the iPhone port downward, and make sure that there is no liquid in the golden finger part of the data cable. With the charging port facing down, turn on the "cool air" with the hair dryerAim at the iPhone charging port for air drying treatment to ensure that the water is dry, so as not to affect the normal charging. (Or use the back of the hair dryer, against the charging port, to suck the water out). Do not insert foreign objects (such as cotton swabs or paper towels) into the lightning connector to prevent debris from falling into it.
3, solution Turn off the power supply of the device and remove the battery (if it can be removed). If the device cannot remove the battery, disconnect the power supply as soon as possible. Wipe the liquid clean with absorbent paper or a towel and other dry items to avoid further infiltration of liquid into the device. If there is only water stains on the surface, the equipment can be left to dryDry in a ventilated place, or use a hair dryer to dry at low temperature, do not use a high temperature hair dryer.
4. Turn the lightning connector down and gently pat the iPhone with your hand to drain the rest of the liquid. Place the iPhone in a dry, ventilated area. Wait at least 30 minutes before trying to charge with a lightning cable or try to connect a lightning accessory. If you see the warning again, there is still liquid in the lightning port or under the pin of the lightning cable. Store your iPhone in a dry, ventilated area for one day.
Troubleshooting measures include: Power off immediately, remove the SIM card, wipe with absorbent paper or dry towelDry with a hair dryer, place a desiccant, wait for drying, etc. Power off immediately If water enters the charging port, power off the phone immediately to avoid short circuit or other damage caused by current passing through the charging port. Remove the SIM card to prevent damage or corrosion to the SIM card.
The solution to the water in the charging port of the Apple phone is to wipe with cotton cloth, gently shake, use a hair dryer, use an electric fan, put it in a ventilated place, use a dehumidifier, use a wireless charging version, and set the drainage function of the phone. Wipe with a cotton cloth Dry the iPhone charger with a cotton cloth or a lint free clothElectric port and Lightning charger.