1, first remove the waste mobile phone, as shown in the following figure after many hardships weldingWire to the positive and negative terminals, a discarded charger and headphones, unwire them.
2, finally is a purchase from the Internet QI standard 1000mA output wireless charging kit, found a lot on the Internet, most of them are output 500mA, Xiaomi mobile phones and a lot of Samsung mobile phones, line charging is 1000mA, with other 500mA chargers have no response, so 500mA is not considered.
3, can not be directly connected to the battery, because wireless charging is also achieved using the principle of electromagnetic mutual induction, similar to the primary and secondary transformers, to the mobile phone sideThe electric energy must be AC, and then filter the voltage regulation to achieve the charging function, and the placement has absolute requirements.
1, please check whether the back center of the phone is placed in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you canCan cause a condition that cannot be charged properly.
2, wireless charger does not charge how to first confirm whether the mobile phone model supports wireless charging function, (you can find the mobile phone information on the brand's official website) check whether the indicator light of the charging board is on. The indicator is off. Check whether the connection between the charger, data cable and power supply is good, and whether there is a bad connection or no power supply.
3, finally, if the above methods are ineffective, you may need to consider replacing the charger or contacting Xiaomi customer service for further support and solutions. To better understand the problem, we can take the quizConsider a practical example. Suppose a user places his Xiaomi phone on a Xiaomi wireless charger to charge it, but finds that the green light starts flashing.
4, the methods that can be taken in this case are: determine that the phone is compatible with the wireless charger, check the charger and the power adapter, check the alignment between the wireless charger and the phone. Make sure your phone is compatible with your wireless charger: Make sure your phone supports wireless charging and that the wireless charger is compatible with your phone model. Different phone models may have different charging standards, so you must use a wireless charger that supports your phone model.
The steps for connecting a wireless charging bank to a mobile phone are as follows: Ensure device compatibility: Check whether the mobile phone supports wireless charging. Mobile phones that support wireless charging can only be connected to wireless power banks. Charging bank pre-charge: Plug the wireless charging bank into the power supply or USB port of the computer to charge. During the charging process, ensure that the wireless charging bank has sufficient power to avoid affecting the charging effect.
Open the Settings page and click on the "Battery" option. On the battery page, click the "Startup Management" option. After entering the startup management page, open the "Wireless reverse charging" button. Reverse charging is the use of the iPhone as a mobile power source to charge other devices.
First turn on the connection Settings on your phone to enable Bluetooth or NFC. Touch the NFC area on the phone screen or select the wireless charger from the Bluetooth connection list to connect. After the connection, the wireless charging bank will automatically identify the type of mobile phone and adjust the output current according to different mobile phone modelsTo provide the appropriate charging current for the phone.
1, this needs to be removed for maintenance, after the removal of the machine can be directly replaced by the wireless charging kit.
2, iPhone X is a high-end model, with a new design, equipped with a sharp color OLED screen, equipped with an upgraded camera, can use 3D Face ID sensor to unlock the phone, support AirPower (blank)Medium energy) wireless charging.
3, iPhone xs max is very useful, it is worth buying, iPhone xs max is the latest flagship machine, although the price is more expensive than some domestic machines, but the cost is the best measure of product quality balance.
4, no matter from the configuration or from the price, iPhone XS Max is a high-end product of the iPhone series, and the shape design is also in line with the aesthetic of The Times.