The metal contact of the charging box has a foreign body. If there is dirt on the metal contact of the charging box, it will lead to poor charging contact, so that it can not be charged. At this point, you can clean the inside of the headphone case and try charging again. The charging case is completely damaged. Or it could be that the charging case is completely damagedIf so, the user can directly contact the after-sales service for maintenance.
The reason why the Apple earphone charging case is not charged is that the earphone battery capacity itself is small, the general charging current is also small, lower than the current protection range of the mobile movie, the charging treasure will think that the earphone's power is full, it will not enter the charging state. The charging box is damaged (and other Bluetooth chargers can be borrowed to try). The little battery in the Bluetooth is dormant or dead.
Low battery. You can connect the headset to the power cord to see if it can be charged normally. The indicator is damaged. After the power cable is connected, the indicator is offHowever, open the mobile phone, you can normally check the headset power and charging capacity, the headset can also be used normally, which proves that there is a problem with the indicator light, in this case, you can go to the official direct store for after-sales maintenance. There's a problem with the headset battery.
Check whether the power cable is in good contact. If the cable is damaged, the battery may not be fully charged. Check the battery of the Apple earphone case for damage. If the battery is damaged, you can consider replacing the new battery to ensure that it can be charged normally. Try plugging your Apple headphones into another available power socket and re-plugging them to charge.
BrandModel: Apple earphones airpods airpods cannot be charged Cause: The power adapter is damaged. The airpods cannot be charged because the power adapter is damaged. The user can replace the power plug. There are stains on the metal contacts inside the charging case. The airpods cannot be charged due to stains on the metal contacts inside the charging case. Users can clean the charging case before use. The internal hardware of the charging box is damaged.
Charging case is low: If your charging case is low, it may take longer to fully charge even if you put the AirPods in the charging case, causing one of the charging cases not to work. The solution is to replace the charging case, or use the original charging case. Bluetooth connection failure: Bluetooth connection failure is a common problem that can cause one or both headphones to run out of power.
may be caused by the earphones are not placed well, the user can take out both earphones, and then put the earphones back into the earphone case to see if it can beCharge it. Generally speaking, if airpods can not charge a headset, most of it is caused by poor contact, the user can check whether the charging needle of the headset and the charging needle in the charging box are stained, if any, use a clean paper towel to wipe it.
airpods can not be charged, possibly because the battery of the charging case and earphones is broken. If the AirPods headphones are within the warranty period, you can bring the headphones to the Apple offline experience store for maintenance. airpods can not charge the cause and solution: two AirTake out the charging case and connect the Pods to the iPhone.
Generally speaking, if airpods do not charge a headset, most of them are caused by poor contact, the user can check whether the charging needle of the headset and the charging needle in the charging box are stained, if there is, use a clean paper towel to wipe it. If the above methods can not solve the problem, then it is only recommended that the user contact the sales later for relevant testing.
The left earphone of AirPods cannot be charged for the following reasons: The earphones are not properly placed. You can take out both headphones2, the charging box is out of power: if the charging box has no power, then when we put the AirPods into the charging, the charging box light will not be on. At this time, we need to charge the charging box to normal use. The AirPods are fully charged: If we have fully charged the AirPods before, then when we put them in the charging case again to charge, the charging case light will not come on.
3, Apple headset charging does not light up the reasons are: charging bin no power, battery damage, indicator failure. The charging bay is dead. If the charging bay isAfter damage, can not be recharged, you can consider replacing the battery. However, it should be noted that replacing the battery requires certain technologies and tools. If you are not familiar with the operation, it is recommended to find a professional to replace the battery.
4, first of all, low battery power may be the key to the problem. If the headset battery is too low, the light display function may be temporarily disabled. To solve this problem, simply make sure the headset is fully charged. Secondly, the pairing Settings of the headphones may also cause the lights to not shine. Try disconnecting and reconnecting the device, and if the problem persists, a hard reset of the headset may be required to restore the initial Settings. If the battery and pairing Settings are bothYeah, maybe the light itself is malfunctioning.
5, if there is a problem with the connection between the charging case and the headset, then the charging indicator may not light up. Try reconnecting the headset to the charging case. Check the contact points between the headset and the charging compartment for dust, foreign objects, or corrosion, and gently wipe these contact points with a clean, soft cloth to ensure that they are clean and free of obstruction.
1, the charging box is out of power. When the charging case is out of powerNext, it is not possible to charge the headset, after finding that the headset cannot be charged, it is recommended to check whether the charging box is powered. The earphone charging connector is blocked. There is also a situation that causes the earphone to be charged is poor contact.
2, you ask is the Apple wireless headset fell a charge can not charge what reason? The battery is damaged. If the Bluetooth headset battery is damaged, take the Bluetooth headset and its purchase invoice and other things to the nearby maintenance outlet for detection, repair or replacement of a new battery.
3, fell a bit, can not be charged, it is estimated that it is broken, there is a fault. Check it outGo to the repair shop to repair whether it can be repaired, repaired well is the best, if not, can only buy a new one.
4, the charger has a problem resulting in no charge. There was an internal malfunction in the headset, and damage to the battery and circuitry were among the reasons. If your headphones have the above internal problems, you need to go to the repair shop to repair them. There is a problem with the charger and it cannot be charged. Just replace the dataflow.
5, there should be the original device broken, it can not be seen, and it should be measured with a multimeter. If the Bluetooth is more expensive, you can send it to the store to have it repaired. Buy a new one if it's not too expensive.
6, the cause of the Bluetooth headset is not charged and the corresponding treatment method: the first Bluetooth headset internal failure, such as battery or circuit damage, charging interface short circuit, etc. This requires the earphones to be sent for repair. The second charger or data cable has a problem, resulting in charging cannot continue. In this way, you need to replace the matching charger or data cable to recharge. Avoid damaging your Bluetooth headset by choosing the right charger.
1, you ask is Apple wireless headphones fell a charge can not charge what reason? The battery is damaged. If the Bluetooth headset battery is damaged, take the Bluetooth headset and its purchase invoice and other things to the nearby maintenance outlet for detection, repair or replacement of a new battery.
2, fell a bit, can not be charged, it is estimated that it is broken, there is a fault. You see if it can be repaired in the repair shop. If it is repaired well, it is best. If it is not repaired well, you can only buy a new one.
3, the charger has a problem resulting in no charge. The inside of the headset happensFailure, battery damage and electrical circuit are all factors. If your headphones have the above internal problems, you need to go to the repair shop to repair them. There is a problem with the charger and it cannot be charged. Just replace the dataflow.
1. Check whether the phone is disconnected from the headset, and place the headset case when the phone is connected to the Bluetooth headsetThe medium will not be charged. After the Bluetooth connection is turned off, the headset will start charging.
2, solution one: turn off the two headphones, place them for a while, and then turn on the headset charging box indicator light in accordance with the instructions, and then connect the mobile phone Bluetooth. Solution 2: Many Bluetooth headsets can be restored to factory Settings, the Bluetooth headsets can be restored to factory Settings, and the mobile phone Bluetooth connected devices are deleted from the mobile phone, and then according to the instructions steps, re-connect the mobile phone Bluetooth.
3, does the question want to ask "Millet headset display left ear 0% right ear display 100% why?" .The left ear is lower than the minimum power required for work, and the battery needs to be charged or replaced. The poor contact of the left earphone is caused by a loose plug or a broken connection cable. Please check that the left earphone cable is intact and securely inserted. The left earphone is faulty and needs to be repaired or replaced.
4. Put the Bluetooth headphones in the charging case and make sure they are fully charged. Turn on your device's Bluetooth Settings and pair and connect both left and right headphones. Go to the Settings menu of your Bluetooth headset and find the "Single ear Mode" or "Binaural Mode" option. Select "Single ear Mode" and follow the prompts to connect the left and right earphones separately.< / p >